If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
A couple of days ago, I started getting this error message
Word cannot start the converter mswrd632.wpc Can anyone tell me what this is? Sometimes it will pop up twice, sometimes 3 times. I did a search on this phrase and found articles on Lotus Notes and Mail Merge. I have never used Notes. I have never used Mail Merge on this PC. I'm running Office 2007 on Win XP. I believe I have all the latest updates. |
#2
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
See
http://blogs.technet.com/wordonenote...6-0-files.aspx -- Terry Farrell - MSWord MVP "Sesquipedalian Sam" wrote in message ... A couple of days ago, I started getting this error message Word cannot start the converter mswrd632.wpc Can anyone tell me what this is? Sometimes it will pop up twice, sometimes 3 times. I did a search on this phrase and found articles on Lotus Notes and Mail Merge. I have never used Notes. I have never used Mail Merge on this PC. I'm running Office 2007 on Win XP. I believe I have all the latest updates. |
#3
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
Thanks for the link - I'm having the same problem. I tried to make the registry change described in the article, but did not have Wordpad at HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion
\Applets\Wordpad Have you seen anything else that helped with this problem? --- frmsrcurl: http://msgroups.net/microsoft.public...r-mswrd632.wpc |
#4
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
The cause of this error, for myself, has had nothing to do with Wordpad. When opening an Office '07 file in Office '03, with the compatibility pack installed on the system, this error is cropping up. The '07 files would open fine up to a couple days ago, so all the right software is on the machine.
--- frmsrcurl: http://msgroups.net/microsoft.public...r-mswrd632.wpc |
#5
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
On Mon, 14 Dec 2009 09:53:10 -0000, "Terry Farrell"
wrote: See http://blogs.technet.com/wordonenote...6-0-files.aspx This article asks me to make a Registry change. I'd really rather not do that. Is there any other fix? This article says it may be caused by a security update. I suggest MSFT needs to send out another update to fix the update. And then actually do a little testing BEFORE they ship the updates. This is the second time in a year or so that an update broke something that I know of. The error only seems to happen when I open a .doc document. I'm running Office 2007. |
#6
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
Sesquipedalian Sam wrote:
On Mon, 14 Dec 2009 09:53:10 -0000, "Terry Farrell" wrote: See http://blogs.technet.com/wordonenote...6-0-files.aspx This article asks me to make a Registry change. I'd really rather not do that. Is there any other fix? This article says it may be caused by a security update. I suggest MSFT needs to send out another update to fix the update. And then actually do a little testing BEFORE they ship the updates. This is the second time in a year or so that an update broke something that I know of. The error only seems to happen when I open a .doc document. I'm running Office 2007. Sam, did you read the KnowledgeBase article linked from that page? This isn't an error, it's deliberate; Microsoft wants to prevent you from using the old WordPad converter because it isn't secure. The registry change is intended for administrators who consider using the converter more important than closing the security hole, at least temporarily. Also, because it's a deliberate change, there is never going to be "another fix" for the security update. But your problem is a bit different from what the articles describe. You're trying to open a .doc file in Word 2007, which should have nothing to do with WordPad or the old converter. What's happened is that Windows has associated the .doc extension with WordPad instead of Word. If the security patch hadn't been applied, the document would have opened in WordPad (which can also read the .doc format), and you would have been complaining about that instead. ;-) Run the winword /r command as described in http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm and see if that fixes the problem. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#7
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
On Mon, 14 Dec 2009 11:47:36 -0500, "Jay Freedman"
wrote: Sesquipedalian Sam wrote: On Mon, 14 Dec 2009 09:53:10 -0000, "Terry Farrell" wrote: See http://blogs.technet.com/wordonenote...6-0-files.aspx This article asks me to make a Registry change. I'd really rather not do that. Is there any other fix? This article says it may be caused by a security update. I suggest MSFT needs to send out another update to fix the update. And then actually do a little testing BEFORE they ship the updates. This is the second time in a year or so that an update broke something that I know of. The error only seems to happen when I open a .doc document. I'm running Office 2007. Sam, did you read the KnowledgeBase article linked from that page? Nope. This isn't an error, it's deliberate; Microsoft wants to prevent you from using the old WordPad converter because it isn't secure. The registry change is intended for administrators who consider using the converter more important than closing the security hole, at least temporarily. Also, because it's a deliberate change, there is never going to be "another fix" for the security update. But your problem is a bit different from what the articles describe. You're trying to open a .doc file in Word 2007, which should have nothing to do with WordPad or the old converter. What's happened is that Windows has associated the .doc extension with WordPad instead of Word. If the security patch hadn't been applied, the document would have opened in WordPad (which can also read the .doc format), and you would have been complaining about that instead. ;-) I pretty sure the .doc extension is associated with Word. If I double-click a .doc file, it opens in Word, always has. I just tested it again. Run the winword /r command as described in http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm and see if that fixes the problem. Do I need to close Word (all open docs) first? Do you still think I need to do this even though .doc files are already associated with Word? |
#8
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
On Mon, 14 Dec 2009 11:47:36 -0500, "Jay Freedman"
wrote: Sesquipedalian Sam wrote: On Mon, 14 Dec 2009 09:53:10 -0000, "Terry Farrell" wrote: See http://blogs.technet.com/wordonenote...6-0-files.aspx This article asks me to make a Registry change. I'd really rather not do that. Is there any other fix? This article says it may be caused by a security update. I suggest MSFT needs to send out another update to fix the update. And then actually do a little testing BEFORE they ship the updates. This is the second time in a year or so that an update broke something that I know of. The error only seems to happen when I open a .doc document. I'm running Office 2007. Sam, did you read the KnowledgeBase article linked from that page? This isn't an error, it's deliberate; Microsoft wants to prevent you from using the old WordPad converter because it isn't secure. The registry change is intended for administrators who consider using the converter more important than closing the security hole, at least temporarily. Also, because it's a deliberate change, there is never going to be "another fix" for the security update. But your problem is a bit different from what the articles describe. You're trying to open a .doc file in Word 2007, which should have nothing to do with WordPad or the old converter. What's happened is that Windows has associated the .doc extension with WordPad instead of Word. If the security patch hadn't been applied, the document would have opened in WordPad (which can also read the .doc format), and you would have been complaining about that instead. ;-) Run the winword /r command as described in http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm and see if that fixes the problem. PS: If this is "deliberate", then the left hand doesn't know what right hand is doing. When the error pops up, there's a help button, which says nothing about security or Notepad or anything else useful: This message can appear if: * The converter was not properly registered. * The converter was inadvertently deleted without removing the registry information. * The converter support files are corrupt. * The converter installation was removed and the uninstall tool did not finish clearing the registry settings. * The hard disk is damaged where the converter files were stored. Usually, reinstalling the converter will overcome this problem. If the converter reports that it is already installed, first uninstall it so that the setup program can remove the files and registry settings. If removing and reinstalling the converter is not successful, there may be a problem with a resource on the computer (for example, an executable file that is needed to properly register the converters on the computer has failed or stopped running). In this case, it is best to turn off the computer and start over. I particularly like the last suggestion. I would only change it to "turn the computer off and throw it out the window". |
#9
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
Sesquipedalian Sam wrote:
On Mon, 14 Dec 2009 11:47:36 -0500, "Jay Freedman" wrote: Sesquipedalian Sam wrote: On Mon, 14 Dec 2009 09:53:10 -0000, "Terry Farrell" wrote: See http://blogs.technet.com/wordonenote...6-0-files.aspx This article asks me to make a Registry change. I'd really rather not do that. Is there any other fix? This article says it may be caused by a security update. I suggest MSFT needs to send out another update to fix the update. And then actually do a little testing BEFORE they ship the updates. This is the second time in a year or so that an update broke something that I know of. The error only seems to happen when I open a .doc document. I'm running Office 2007. Sam, did you read the KnowledgeBase article linked from that page? Nope. This isn't an error, it's deliberate; Microsoft wants to prevent you from using the old WordPad converter because it isn't secure. The registry change is intended for administrators who consider using the converter more important than closing the security hole, at least temporarily. Also, because it's a deliberate change, there is never going to be "another fix" for the security update. But your problem is a bit different from what the articles describe. You're trying to open a .doc file in Word 2007, which should have nothing to do with WordPad or the old converter. What's happened is that Windows has associated the .doc extension with WordPad instead of Word. If the security patch hadn't been applied, the document would have opened in WordPad (which can also read the .doc format), and you would have been complaining about that instead. ;-) I pretty sure the .doc extension is associated with Word. If I double-click a .doc file, it opens in Word, always has. I just tested it again. OK, maybe I'm wrong about the association -- but if so, I don't understand how the WordPad converter could get involved in the process. I still think reregistering Word is worth a try; it's quick, and at worst it won't have any effect. Run the winword /r command as described in http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm and see if that fixes the problem. Do I need to close Word (all open docs) first? Yes, close all open documents and shut down Word. Then run the command from the Start Run box or from a command prompt window. Do you still think I need to do this even though .doc files are already associated with Word? It can't hurt, and it might help. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#10
|
|||
|
|||
Word cannot start the converter mswrd632.wpc
On Mon, 14 Dec 2009 14:37:49 -0500, "Jay Freedman"
wrote: Sesquipedalian Sam wrote: On Mon, 14 Dec 2009 11:47:36 -0500, "Jay Freedman" wrote: Sesquipedalian Sam wrote: On Mon, 14 Dec 2009 09:53:10 -0000, "Terry Farrell" wrote: See http://blogs.technet.com/wordonenote...6-0-files.aspx This article asks me to make a Registry change. I'd really rather not do that. Is there any other fix? This article says it may be caused by a security update. I suggest MSFT needs to send out another update to fix the update. And then actually do a little testing BEFORE they ship the updates. This is the second time in a year or so that an update broke something that I know of. The error only seems to happen when I open a .doc document. I'm running Office 2007. Sam, did you read the KnowledgeBase article linked from that page? Nope. This isn't an error, it's deliberate; Microsoft wants to prevent you from using the old WordPad converter because it isn't secure. The registry change is intended for administrators who consider using the converter more important than closing the security hole, at least temporarily. Also, because it's a deliberate change, there is never going to be "another fix" for the security update. But your problem is a bit different from what the articles describe. You're trying to open a .doc file in Word 2007, which should have nothing to do with WordPad or the old converter. What's happened is that Windows has associated the .doc extension with WordPad instead of Word. If the security patch hadn't been applied, the document would have opened in WordPad (which can also read the .doc format), and you would have been complaining about that instead. ;-) I pretty sure the .doc extension is associated with Word. If I double-click a .doc file, it opens in Word, always has. I just tested it again. OK, maybe I'm wrong about the association -- but if so, I don't understand how the WordPad converter could get involved in the process. I still think reregistering Word is worth a try; it's quick, and at worst it won't have any effect. Run the winword /r command as described in http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm and see if that fixes the problem. Do I need to close Word (all open docs) first? Yes, close all open documents and shut down Word. Then run the command from the Start Run box or from a command prompt window. Do you still think I need to do this even though .doc files are already associated with Word? It can't hurt, and it might help. OK. I ran "winword /r" from the DOS box. It took about 30 seconds to do something. I then tried opening a .doc document. The first 2 I tried opened without any problems. The third one got the same error. It didn't happen every time before. I thought it was intermittent, but apparently it is just certain documents. I now have 2-3 that do not get the error and 2-3 that do. That is consistent. |
Thread Tools | |
Display Modes | |
|
|