A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Word » Mailmerge
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

Word Mail Merge Date Format



 
 
Thread Tools Display Modes
  #1  
Old May 11th, 2007, 09:58 PM posted to microsoft.public.word.mailmerge.fields
merecat_
external usenet poster
 
Posts: 3
Default Word Mail Merge Date Format

I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:

#12 december 2002#

I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.

  #2  
Old May 12th, 2007, 07:28 AM posted to microsoft.public.word.mailmerge.fields
Peter Jamieson
external usenet poster
 
Posts: 4,550
Default Word Mail Merge Date Format

Hi Mark,

Thanks for posting. There's an article at

http://support.microsoft.com/kb/327579/en-us

which covers one important aspect of this issue (however, I am not
completely sure that the problem was permanently fixed in SP3 or in later
versions of Word).

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!]


You are not the only one :-) You may well be too ground down to have
another look, but on the business of connecting to text files, recently I
started having a more thorough look at this and discovered that by using a
..odc file to specify the data source, you can also get the OLE DB provider
to look at the SCHEMA.INI file containing information - including character
encoding - about specified text files. You may be able to find the relevant
message at

http://groups.google.com/group/micro...9588c43fc31d70

otherwise, try searching Google Groups for jamieson SCHEMA.INI odc Unicode

One bit of information that isn't in that message is that the SCHEMA.INI
lets you specify a date format. However, I don't know whether the OLE DB
provider still gets it wrong.

Peter Jamieson


"merecat_" wrote in message
ups.com...
I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:

#12 december 2002#

I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.


  #3  
Old May 12th, 2007, 09:21 PM posted to microsoft.public.word.mailmerge.fields
merecat_
external usenet poster
 
Posts: 3
Default Word Mail Merge Date Format

Hi Peter,

This fix would be fine if we were able to move off of SP2 - but we are
not!

Regards,
Mark.

  #4  
Old May 13th, 2007, 10:09 AM posted to microsoft.public.word.mailmerge.fields
Peter Jamieson
external usenet poster
 
Posts: 4,550
Default Word Mail Merge Date Format

This fix would be fine if we were able to move off of SP2 - but we are
not!


I suppose the chances are that you would not be able to install the hotfix
mentioned there either?

Peter Jamieson
"merecat_" wrote in message
oups.com...
Hi Peter,

This fix would be fine if we were able to move off of SP2 - but we are
not!

Regards,
Mark.


  #5  
Old May 13th, 2007, 08:17 PM posted to microsoft.public.word.mailmerge.fields
merecat_
external usenet poster
 
Posts: 3
Default Word Mail Merge Date Format

Hi Peter,

Oh! I had missed the hot fix, and the schema.ini too!!

Apologies.

Our desktops here are all locked down, we don't have installation
rights to change the core software build (of which Office is part).
Software like this is controlled by a central service too and
'floated' onto client machines over the network.

However the schema.ini route does sound interesting and one which
would be feasible in my case (as it just involves some configuration
files by the sounds of it), and one I would certainly explore if my
current 'hash character' fix goes pear-shaped or if I have the same
problem to solve in future. It sounds like the right way to do it if I
were starting from scratch again.

Regards,
Mark.

  #6  
Old May 14th, 2007, 01:03 AM posted to microsoft.public.word.mailmerge.fields
Peter Jamieson
external usenet poster
 
Posts: 4,550
Default Word Mail Merge Date Format

Our desktops here are all locked down, we don't have installation
rights to change the core software build (of which Office is part).
Software like this is controlled by a central service too and
'floated' onto client machines over the network.


Yes, I suspected it would be like that.

I don't know if the schema.ini thing will fix this prticular problem since
the same OLE DB provider is involved, but maybe the fact that it's using a
different IISAM will make a difference. Not sure I will ever ge around to
trying that...

Peter Jamieson

"merecat_" wrote in message
oups.com...
Hi Peter,

Oh! I had missed the hot fix, and the schema.ini too!!

Apologies.

Our desktops here are all locked down, we don't have installation
rights to change the core software build (of which Office is part).
Software like this is controlled by a central service too and
'floated' onto client machines over the network.

However the schema.ini route does sound interesting and one which
would be feasible in my case (as it just involves some configuration
files by the sounds of it), and one I would certainly explore if my
current 'hash character' fix goes pear-shaped or if I have the same
problem to solve in future. It sounds like the right way to do it if I
were starting from scratch again.

Regards,
Mark.



  #7  
Old April 28th, 2010, 08:37 PM posted to microsoft.public.word.mailmerge.fields
fegf fegf
external usenet poster
 
Posts: 4
Default WordMerge

I recommend you to use WordMerge from NDADOS.

http://www.ndados.com



merecat_ wrote:

Word Mail Merge Date Format
11-May-07

I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:


I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.

Previous Posts In This Thread:

On Friday, May 11, 2007 4:58 PM
merecat_ wrote:

Word Mail Merge Date Format
I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:


I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.

On Saturday, May 12, 2007 2:28 AM
Peter Jamieson wrote:

Word Mail Merge Date Format
Hi Mark,

Thanks for posting. There's an article at

http://support.microsoft.com/kb/327579/en-us

which covers one important aspect of this issue (however, I am not
completely sure that the problem was permanently fixed in SP3 or in later
versions of Word).


You are not the only one :-) You may well be too ground down to have
another look, but on the business of connecting to text files, recently I
started having a more thorough look at this and discovered that by using a
..odc file to specify the data source, you can also get the OLE DB provider
to look at the SCHEMA.INI file containing information - including character
encoding - about specified text files. You may be able to find the relevant
message at

http://groups.google.com/group/micro...9588c43fc31d70

otherwise, try searching Google Groups for jamieson SCHEMA.INI odc Unicode

One bit of information that isn't in that message is that the SCHEMA.INI
lets you specify a date format. However, I don't know whether the OLE DB
provider still gets it wrong.

Peter Jamieson


"merecat_" wrote in message
ups.com...

On Saturday, May 12, 2007 4:21 PM
merecat_ wrote:

Hi Peter,This fix would be fine if we were able to move off of SP2 - but we
Hi Peter,

This fix would be fine if we were able to move off of SP2 - but we are
not!

Regards,
Mark.

On Sunday, May 13, 2007 5:09 AM
Peter Jamieson wrote:

I suppose the chances are that you would not be able to install the hotfix
I suppose the chances are that you would not be able to install the hotfix
mentioned there either?

Peter Jamieson

On Sunday, May 13, 2007 3:17 PM
merecat_ wrote:

Hi Peter,Oh! I had missed the hot fix, and the schema.ini too!!
Hi Peter,

Oh! I had missed the hot fix, and the schema.ini too!!

Apologies.

Our desktops here are all locked down, we don't have installation
rights to change the core software build (of which Office is part).
Software like this is controlled by a central service too and
'floated' onto client machines over the network.

However the schema.ini route does sound interesting and one which
would be feasible in my case (as it just involves some configuration
files by the sounds of it), and one I would certainly explore if my
current 'hash character' fix goes pear-shaped or if I have the same
problem to solve in future. It sounds like the right way to do it if I
were starting from scratch again.

Regards,
Mark.

On Sunday, May 13, 2007 8:03 PM
Peter Jamieson wrote:

Yes, I suspected it would be like that.I don't know if the schema.
Yes, I suspected it would be like that.

I don't know if the schema.ini thing will fix this prticular problem since
the same OLE DB provider is involved, but maybe the fact that it's using a
different IISAM will make a difference. Not sure I will ever ge around to
trying that...

Peter Jamieson

"merecat_" wrote in message
oups.com...


Submitted via EggHeadCafe - Software Developer Portal of Choice
WPF Customized Find Control for FlowDocuments
http://www.eggheadcafe.com/tutorials...ind-contr.aspx
  #8  
Old April 28th, 2010, 08:37 PM posted to microsoft.public.word.mailmerge.fields
fegf fegf
external usenet poster
 
Posts: 4
Default WordMerge

I recommend you to use WordMerge from NDADOS.

http://www.ndados.com



merecat_ wrote:

Word Mail Merge Date Format
11-May-07

I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:


I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.

Previous Posts In This Thread:

On Friday, May 11, 2007 4:58 PM
merecat_ wrote:

Word Mail Merge Date Format
I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:


I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.

On Saturday, May 12, 2007 2:28 AM
Peter Jamieson wrote:

Word Mail Merge Date Format
Hi Mark,

Thanks for posting. There's an article at

http://support.microsoft.com/kb/327579/en-us

which covers one important aspect of this issue (however, I am not
completely sure that the problem was permanently fixed in SP3 or in later
versions of Word).


You are not the only one :-) You may well be too ground down to have
another look, but on the business of connecting to text files, recently I
started having a more thorough look at this and discovered that by using a
..odc file to specify the data source, you can also get the OLE DB provider
to look at the SCHEMA.INI file containing information - including character
encoding - about specified text files. You may be able to find the relevant
message at

http://groups.google.com/group/micro...9588c43fc31d70

otherwise, try searching Google Groups for jamieson SCHEMA.INI odc Unicode

One bit of information that isn't in that message is that the SCHEMA.INI
lets you specify a date format. However, I don't know whether the OLE DB
provider still gets it wrong.

Peter Jamieson


"merecat_" wrote in message
ups.com...

On Saturday, May 12, 2007 4:21 PM
merecat_ wrote:

Hi Peter,This fix would be fine if we were able to move off of SP2 - but we
Hi Peter,

This fix would be fine if we were able to move off of SP2 - but we are
not!

Regards,
Mark.

On Sunday, May 13, 2007 5:09 AM
Peter Jamieson wrote:

I suppose the chances are that you would not be able to install the hotfix
I suppose the chances are that you would not be able to install the hotfix
mentioned there either?

Peter Jamieson

On Sunday, May 13, 2007 3:17 PM
merecat_ wrote:

Hi Peter,Oh! I had missed the hot fix, and the schema.ini too!!
Hi Peter,

Oh! I had missed the hot fix, and the schema.ini too!!

Apologies.

Our desktops here are all locked down, we don't have installation
rights to change the core software build (of which Office is part).
Software like this is controlled by a central service too and
'floated' onto client machines over the network.

However the schema.ini route does sound interesting and one which
would be feasible in my case (as it just involves some configuration
files by the sounds of it), and one I would certainly explore if my
current 'hash character' fix goes pear-shaped or if I have the same
problem to solve in future. It sounds like the right way to do it if I
were starting from scratch again.

Regards,
Mark.

On Sunday, May 13, 2007 8:03 PM
Peter Jamieson wrote:

Yes, I suspected it would be like that.I don't know if the schema.
Yes, I suspected it would be like that.

I don't know if the schema.ini thing will fix this prticular problem since
the same OLE DB provider is involved, but maybe the fact that it's using a
different IISAM will make a difference. Not sure I will ever ge around to
trying that...

Peter Jamieson

"merecat_" wrote in message
oups.com...

On Wednesday, April 28, 2010 3:37 PM
fegf fegf wrote:

WordMerge
I recommend you to use WordMerge from NDADOS.

http://www.ndados.com


Submitted via EggHeadCafe - Software Developer Portal of Choice
IIS 7.0 Extensionless UrlRewriting (Short urls)
http://www.eggheadcafe.com/tutorials...nless-url.aspx
  #9  
Old April 28th, 2010, 08:38 PM posted to microsoft.public.word.mailmerge.fields
fegf fegf
external usenet poster
 
Posts: 4
Default WordMerge

I recommend you to use WordMerge from NDADOS.

http://www.ndados.com



merecat_ wrote:

Word Mail Merge Date Format
11-May-07

I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:


I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.

Previous Posts In This Thread:

On Friday, May 11, 2007 4:58 PM
merecat_ wrote:

Word Mail Merge Date Format
I'm using Word 2002 SP2.

Have had some real problems over the last week trying to get Word's
mail merge to correctly (and consistently) interpret date values.

I tried feeding in all sorts of date formats - this didn't work.

I tried forcing Word to interpret my date as a string - this didn't
work either.

I was about to resort to injecting my date as three separate fields (a
real sledgehammer to crack a nut - that's how desperate I was).

But then I tried enclosing my date in '#' characters - and it worked -
I recall date literals being encoded like this in MS Access.

E.g. the dates in my text file were thus:


I can then us the /@ "dd MMM yyyy" type merge field switches to format
the date as I wish in Word.

Couldn't find this answer anywhere on the net - so thought I'd post it
here in case it helps others. I have no idea whether this works on
other versions of Word or indeed whether the same problem occurs.

It's just so confusing and there is no clear documentation for this.
Why o why does the world use software that is so badly documented!!

BTW I should point out - my data resides in a unicode text file (tab
delimited) but my 'pre-processing' takes this text file and opens it
up and saves it out to an excel document - which is used as input to
the mail merge process. I couldn't get Word to accept my text file
directly (perhaps this was part of the original problem - i.e.
translating the text file into Excel - to be honest I don't really
care [I've been ground down by the problem as you see!] - it works now
anyway - yahoo!).

Mark.
UK.

On Saturday, May 12, 2007 2:28 AM
Peter Jamieson wrote:

Word Mail Merge Date Format
Hi Mark,

Thanks for posting. There's an article at

http://support.microsoft.com/kb/327579/en-us

which covers one important aspect of this issue (however, I am not
completely sure that the problem was permanently fixed in SP3 or in later
versions of Word).


You are not the only one :-) You may well be too ground down to have
another look, but on the business of connecting to text files, recently I
started having a more thorough look at this and discovered that by using a
..odc file to specify the data source, you can also get the OLE DB provider
to look at the SCHEMA.INI file containing information - including character
encoding - about specified text files. You may be able to find the relevant
message at

http://groups.google.com/group/micro...9588c43fc31d70

otherwise, try searching Google Groups for jamieson SCHEMA.INI odc Unicode

One bit of information that isn't in that message is that the SCHEMA.INI
lets you specify a date format. However, I don't know whether the OLE DB
provider still gets it wrong.

Peter Jamieson


"merecat_" wrote in message
ups.com...

On Saturday, May 12, 2007 4:21 PM
merecat_ wrote:

Hi Peter,This fix would be fine if we were able to move off of SP2 - but we
Hi Peter,

This fix would be fine if we were able to move off of SP2 - but we are
not!

Regards,
Mark.

On Sunday, May 13, 2007 5:09 AM
Peter Jamieson wrote:

I suppose the chances are that you would not be able to install the hotfix
I suppose the chances are that you would not be able to install the hotfix
mentioned there either?

Peter Jamieson

On Sunday, May 13, 2007 3:17 PM
merecat_ wrote:

Hi Peter,Oh! I had missed the hot fix, and the schema.ini too!!
Hi Peter,

Oh! I had missed the hot fix, and the schema.ini too!!

Apologies.

Our desktops here are all locked down, we don't have installation
rights to change the core software build (of which Office is part).
Software like this is controlled by a central service too and
'floated' onto client machines over the network.

However the schema.ini route does sound interesting and one which
would be feasible in my case (as it just involves some configuration
files by the sounds of it), and one I would certainly explore if my
current 'hash character' fix goes pear-shaped or if I have the same
problem to solve in future. It sounds like the right way to do it if I
were starting from scratch again.

Regards,
Mark.

On Sunday, May 13, 2007 8:03 PM
Peter Jamieson wrote:

Yes, I suspected it would be like that.I don't know if the schema.
Yes, I suspected it would be like that.

I don't know if the schema.ini thing will fix this prticular problem since
the same OLE DB provider is involved, but maybe the fact that it's using a
different IISAM will make a difference. Not sure I will ever ge around to
trying that...

Peter Jamieson

"merecat_" wrote in message
oups.com...

On Wednesday, April 28, 2010 3:37 PM
fegf fegf wrote:

WordMerge
I recommend you to use WordMerge from NDADOS.

http://www.ndados.com

On Wednesday, April 28, 2010 3:37 PM
fegf fegf wrote:

WordMerge
I recommend you to use WordMerge from NDADOS.

http://www.ndados.com


Submitted via EggHeadCafe - Software Developer Portal of Choice
WPF Report Engine, Part 4
http://www.eggheadcafe.com/tutorials...ne-part-4.aspx
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:58 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 OfficeFrustration.
The comments are property of their posters.