If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Hi Dave,
Files have been sent to the address you provided. Follow these steps to install the Add-In and/or read the attached Word document: 1. Unzip the file JVTableList.MDA to your Office or Access directory to easily find it when we install the Add-In. 2. Now open any Access database and go up to "Tools" on the main Access menu bar. From there go down to the option called "Add-Ins". This sub-menu will list any installed Access add-ins on your system, as well as an option called "Add-In Manager". Click on the option called "Add-In Manager" and a new screen will appear. 3. The box will display a list of available add-ins on the left side. Depending upon where you unzipped the add-in file, you may see the John Viescas Table Documentor already listed in this box. If the file is listed, click on the option to highlight it and then press the "Install" button to complete the installation. There should now be a little "x" next to the option meaning it has now been installed. If you do not see the add-in listed in this box simply click the button called "Add New..." where you can browse for the location of the file. Once you find the file and click on it in the browse window, you will be taken back to the Add-In Manager screen. Now you should see our add-in listed in the box with a "x" by it meaning it has been successfully installed. If not, highlight the option and then press the "Install" button to complete the installation. Hit the "Close" button on the Add-In Manager when finished. That's it, now we're ready to use the utility! 4. To launch the add-in, simply open any database you wish to document and go up to Tools | Add-Ins and click on the new option "John Viescas Table Documentor". Depending upon the number of tables in your database (and whether they are linked or not), the utility should only take a few seconds to create the report and display it on the screen. Once on screen you can either print the report or just view the different pages. Doesn't get any easier than that! Please post back to the newsgroup when you receive the files and if you have any problems. The e-mail was being sent from a "dump" e-mail account and will not be checked if a reply is sent. The ONLY way I will know if you received the file is through the newsgroup. Hope you find it useful. -- Jeff Conrad Access Junkie Bend, Oregon "dave h" wrote in message ... 2000 - thanks again. "Jeff Conrad" wrote in message ... Hi Dave, My posted e-mail address goes to Never-Never Land. Keeps the SPAM down. Sure I can send you a copy. Do you need the Access 97 version or the 2000 version? The 2000 version works with 2000, 2002, and 2003. -- Jeff Conrad Access Junkie Bend, Oregon "dave h" e-mail snipped wrote in message ... Hi Jeff, I couldn't seem to email you directly, but I'd sure appreciate a copy of your Add-in" My email is the one you see on a reply. Thanks "Jeff Conrad" wrote in message ... I created an Access Add-In called the "John Viescas Table Documentor" If you do wish to have a copy please let me know where you would like it sent to -- Jeff Conrad Access Junkie Bend, Oregon "Cindy H" wrote in message ... Hi, I need to create a list of all the data elements used in my project. The list needs to include the descriptions that I typed into the description column of the table design view. I've tried the Tools-Analyze-Documenter, but it does not show the description column data. Any ideas how to extract the description so I don't have to retype all this info to create a data element dictionary? Thanks, Cindy H |
#12
|
|||
|
|||
Hi Jeff,
Thanks very much! I got the file and installed it - it's great - just what I was looking for and totally painless to install. Is it useful?? You bet - 100% useful. Thanks Again, DaveH "Jeff Conrad" wrote in message ... Hi Dave, Files have been sent to the address you provided. Follow these steps to install the Add-In and/or read the attached Word document: 1. Unzip the file JVTableList.MDA to your Office or Access directory to easily find it when we install the Add-In. 2. Now open any Access database and go up to "Tools" on the main Access menu bar. From there go down to the option called "Add-Ins". This sub-menu will list any installed Access add-ins on your system, as well as an option called "Add-In Manager". Click on the option called "Add-In Manager" and a new screen will appear. 3. The box will display a list of available add-ins on the left side. Depending upon where you unzipped the add-in file, you may see the John Viescas Table Documentor already listed in this box. If the file is listed, click on the option to highlight it and then press the "Install" button to complete the installation. There should now be a little "x" next to the option meaning it has now been installed. If you do not see the add-in listed in this box simply click the button called "Add New..." where you can browse for the location of the file. Once you find the file and click on it in the browse window, you will be taken back to the Add-In Manager screen. Now you should see our add-in listed in the box with a "x" by it meaning it has been successfully installed. If not, highlight the option and then press the "Install" button to complete the installation. Hit the "Close" button on the Add-In Manager when finished. That's it, now we're ready to use the utility! 4. To launch the add-in, simply open any database you wish to document and go up to Tools | Add-Ins and click on the new option "John Viescas Table Documentor". Depending upon the number of tables in your database (and whether they are linked or not), the utility should only take a few seconds to create the report and display it on the screen. Once on screen you can either print the report or just view the different pages. Doesn't get any easier than that! Please post back to the newsgroup when you receive the files and if you have any problems. The e-mail was being sent from a "dump" e-mail account and will not be checked if a reply is sent. The ONLY way I will know if you received the file is through the newsgroup. Hope you find it useful. -- Jeff Conrad Access Junkie Bend, Oregon "dave h" wrote in message ... 2000 - thanks again. "Jeff Conrad" wrote in message ... Hi Dave, My posted e-mail address goes to Never-Never Land. Keeps the SPAM down. Sure I can send you a copy. Do you need the Access 97 version or the 2000 version? The 2000 version works with 2000, 2002, and 2003. -- Jeff Conrad Access Junkie Bend, Oregon "dave h" e-mail snipped wrote in message ... Hi Jeff, I couldn't seem to email you directly, but I'd sure appreciate a copy of your Add-in" My email is the one you see on a reply. Thanks "Jeff Conrad" wrote in message ... I created an Access Add-In called the "John Viescas Table Documentor" If you do wish to have a copy please let me know where you would like it sent to -- Jeff Conrad Access Junkie Bend, Oregon "Cindy H" wrote in message ... Hi, I need to create a list of all the data elements used in my project. The list needs to include the descriptions that I typed into the description column of the table design view. I've tried the Tools-Analyze-Documenter, but it does not show the description column data. Any ideas how to extract the description so I don't have to retype all this info to create a data element dictionary? Thanks, Cindy H |
#13
|
|||
|
|||
Excellent, that is very good to hear Dave!
Glad it is just what you were looking for. Thanks for the feedback. -- Jeff Conrad Access Junkie Bend, Oregon "dave h" wrote in message ... Hi Jeff, Thanks very much! I got the file and installed it - it's great - just what I was looking for and totally painless to install. Is it useful?? You bet - 100% useful. Thanks Again, DaveH "Jeff Conrad" wrote in message ... Hi Dave, Files have been sent to the address you provided. Follow these steps to install the Add-In and/or read the attached Word document: 1. Unzip the file JVTableList.MDA to your Office or Access directory to easily find it when we install the Add-In. 2. Now open any Access database and go up to "Tools" on the main Access menu bar. From there go down to the option called "Add-Ins". This sub-menu will list any installed Access add-ins on your system, as well as an option called "Add-In Manager". Click on the option called "Add-In Manager" and a new screen will appear. 3. The box will display a list of available add-ins on the left side. Depending upon where you unzipped the add-in file, you may see the John Viescas Table Documentor already listed in this box. If the file is listed, click on the option to highlight it and then press the "Install" button to complete the installation. There should now be a little "x" next to the option meaning it has now been installed. If you do not see the add-in listed in this box simply click the button called "Add New..." where you can browse for the location of the file. Once you find the file and click on it in the browse window, you will be taken back to the Add-In Manager screen. Now you should see our add-in listed in the box with a "x" by it meaning it has been successfully installed. If not, highlight the option and then press the "Install" button to complete the installation. Hit the "Close" button on the Add-In Manager when finished. That's it, now we're ready to use the utility! 4. To launch the add-in, simply open any database you wish to document and go up to Tools | Add-Ins and click on the new option "John Viescas Table Documentor". Depending upon the number of tables in your database (and whether they are linked or not), the utility should only take a few seconds to create the report and display it on the screen. Once on screen you can either print the report or just view the different pages. Doesn't get any easier than that! Please post back to the newsgroup when you receive the files and if you have any problems. The e-mail was being sent from a "dump" e-mail account and will not be checked if a reply is sent. The ONLY way I will know if you received the file is through the newsgroup. Hope you find it useful. -- Jeff Conrad Access Junkie Bend, Oregon "dave h" wrote in message ... 2000 - thanks again. "Jeff Conrad" wrote in message ... Hi Dave, My posted e-mail address goes to Never-Never Land. Keeps the SPAM down. Sure I can send you a copy. Do you need the Access 97 version or the 2000 version? The 2000 version works with 2000, 2002, and 2003. -- Jeff Conrad Access Junkie Bend, Oregon "dave h" e-mail snipped wrote in message ... Hi Jeff, I couldn't seem to email you directly, but I'd sure appreciate a copy of your Add-in" My email is the one you see on a reply. Thanks "Jeff Conrad" wrote in message ... I created an Access Add-In called the "John Viescas Table Documentor" If you do wish to have a copy please let me know where you would like it sent to -- Jeff Conrad Access Junkie Bend, Oregon "Cindy H" wrote in message ... Hi, I need to create a list of all the data elements used in my project. The list needs to include the descriptions that I typed into the description column of the table design view. I've tried the Tools-Analyze-Documenter, but it does not show the description column data. Any ideas how to extract the description so I don't have to retype all this info to create a data element dictionary? Thanks, Cindy H |
#14
|
|||
|
|||
Hi Scott,
Sure, I'd be happy to send along a copy of the "John Viescas Table Documentor." Do you need the 97 version or the 2000 version? The 2000 version works with Access 2000, 2002, and 2003. -- Jeff Conrad Access Junkie Bend, Oregon "Scott" wrote in message ... Jeff, Can you send me the add-in also. I've used the Access built-in documentor, but woulld be interested in trying what you have. My address is "spydor AT mindless.com" Thanks, Scott On Sat, 29 Jan 2005 14:48:43 -0800, "Jeff Conrad" wrote: Excellent, that is very good to hear Dave! Glad it is just what you were looking for. Thanks for the feedback. |
#15
|
|||
|
|||
Hi Scott,
Files have been sent to the address you provided. Subject line will be: "Access Add-In You Requested From The Newsgroup" Follow these steps to install the Add-In and/or read the attached Word document: 1. Unzip the file JVTableList.MDA to your Office or Access directory to easily find it when we install the Add-In. 2. Now open any Access database and go up to "Tools" on the main Access menu bar. From there go down to the option called "Add-Ins". This sub-menu will list any installed Access add-ins on your system, as well as an option called "Add-In Manager". Click on the option called "Add-In Manager" and a new screen will appear. 3. The box will display a list of available add-ins on the left side. Depending upon where you unzipped the add-in file, you may see the John Viescas Table Documentor already listed in this box. If the file is listed, click on the option to highlight it and then press the "Install" button to complete the installation. There should now be a little "x" next to the option meaning it has now been installed. If you do not see the add-in listed in this box simply click the button called "Add New..." where you can browse for the location of the file. Once you find the file and click on it in the browse window, you will be taken back to the Add-In Manager screen. Now you should see our add-in listed in the box with a "x" by it meaning it has been successfully installed. If not, highlight the option and then press the "Install" button to complete the installation. Hit the "Close" button on the Add-In Manager when finished. That's it, now we're ready to use the utility! 4. To launch the add-in, simply open any database you wish to document and go up to Tools | Add-Ins and click on the new option "John Viescas Table Documentor". Depending upon the number of tables in your database (and whether they are linked or not), the utility should only take a few seconds to create the report and display it on the screen. Once on screen you can either print the report or just view the different pages. Doesn't get any easier than that! Please post back to the newsgroup when you receive the files and if you have any problems. The e-mail was being sent from a "dump" e-mail account and will not be checked if a reply is sent. The ONLY way I will know if you received the file is through the newsgroup. Hope you find it useful. -- Jeff Conrad Access Junkie Bend, Oregon "Scott" wrote in message news The 2000 version. Thanks again, Scott On Sat, 5 Feb 2005 11:00:26 -0800, "Jeff Conrad" wrote: Hi Scott, Sure, I'd be happy to send along a copy of the "John Viescas Table Documentor." Do you need the 97 version or the 2000 version? The 2000 version works with Access 2000, 2002, and 2003. "Scott" wrote in message ... Jeff, Can you send me the add-in also. I've used the Access built-in documentor, but woulld be interested in trying what you have. My address is "spydor AT mindless.com" Thanks, Scott |
#16
|
|||
|
|||
Good to hear you received the files OK Scott.
Hope it helps in your projects. -- Jeff Conrad Access Junkie Bend, Oregon "Scott" wrote in message ... Jeff, Thanks, I received the files. It seems like something I will be able to put to use. Been one of those weeks, so just got around to actually looking at it. Scott On Sun, 6 Feb 2005 10:19:00 -0800, "Jeff Conrad" wrote: Hi Scott, Files have been sent to the address you provided. Subject line will be: "Access Add-In You Requested From The Newsgroup" Follow these steps to install the Add-In and/or read the attached Word document: 1. Unzip the file JVTableList.MDA to your Office or Access directory to easily find it when we install the Add-In. 2. Now open any Access database and go up to "Tools" on the main Access menu bar. From there go down to the option called "Add-Ins". This sub-menu will list any installed Access add-ins on your system, as well as an option called "Add-In Manager". Click on the option called "Add-In Manager" and a new screen will appear. 3. The box will display a list of available add-ins on the left side. Depending upon where you unzipped the add-in file, you may see the John Viescas Table Documentor already listed in this box. If the file is listed, click on the option to highlight it and then press the "Install" button to complete the installation. There should now be a little "x" next to the option meaning it has now been installed. If you do not see the add-in listed in this box simply click the button called "Add New..." where you can browse for the location of the file. Once you find the file and click on it in the browse window, you will be taken back to the Add-In Manager screen. Now you should see our add-in listed in the box with a "x" by it meaning it has been successfully installed. If not, highlight the option and then press the "Install" button to complete the installation. Hit the "Close" button on the Add-In Manager when finished. That's it, now we're ready to use the utility! 4. To launch the add-in, simply open any database you wish to document and go up to Tools | Add-Ins and click on the new option "John Viescas Table Documentor". Depending upon the number of tables in your database (and whether they are linked or not), the utility should only take a few seconds to create the report and display it on the screen. Once on screen you can either print the report or just view the different pages. Doesn't get any easier than that! Please post back to the newsgroup when you receive the files and if you have any problems. The e-mail was being sent from a "dump" e-mail account and will not be checked if a reply is sent. The ONLY way I will know if you received the file is through the newsgroup. Hope you find it useful. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I need an explanation to a line in a code for a Data Dictionary | RedCentreLPlater | New Users | 2 | October 27th, 2004 10:05 AM |
Creating Data Dictionary | shuchi | General Discussion | 4 | September 15th, 2004 04:10 AM |
Mial merge data base problems | Rachael | Mailmerge | 16 | May 21st, 2004 06:22 PM |