Group Address Contents

OE6...
I have created a Group address by adding Names and Email Address directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was rejected, and
I want to remove that address from my Group Address, however, the Group Address List
shows the "Name" that I entered. How can I quickly view or find that rejected email
address when I only see the person's name?

Earl

That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so, look
at the message source (Ctrl-F3). There in the TO, CC or BCC field,
you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with the
group, save to the Drafts folder and look at that message's source. If
you are using Automatically Complete e-mail addresses when composing
(Tools, Options, Send) and you typed in the group name (rather than
selecting from the address book), be sure to use Tools, Check Names
(Ctrl-K) so that the group name becomes underlined. Before you save to
drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the
Group Address List
shows the "Name" that I entered. How can I quickly view or find that
rejected email
address when I only see the person's name?

Earl

Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so, look at
the message source (Ctrl-F3). There in the TO, CC or BCC field, you'll
see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then save
the message to an EML file, and open the EML file in Notepad and use the
Find function.

If you don't have the original message, you can start a new one with the
group, save to the Drafts folder and look at that message's source. If
you are using Automatically Complete e-mail addresses when composing
(Tools, Options, Send) and you typed in the group name (rather than
selecting from the address book), be sure to use Tools, Check Names
(Ctrl-K) so that the group name becomes underlined. Before you save to
drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the Group
Address List
shows the "Name" that I entered. How can I quickly view or find that
rejected email
address when I only see the person's name?

Earl

You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so,
look at the message source (Ctrl-F3). There in the TO, CC or BCC
field, you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with
the group, save to the Drafts folder and look at that message's
source. If you are using Automatically Complete e-mail addresses
when composing (Tools, Options, Send) and you typed in the group name
(rather than selecting from the address book), be sure to use Tools,
Check Names (Ctrl-K) so that the group name becomes underlined.
Before you save to drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the
Group Address List
shows the "Name" that I entered. How can I quickly view or find
that rejected email
address when I only see the person's name?

Earl

Why not just save to Draft, the open message and look at Properties?

I do this in related situations.

DAS

To send an e-mail directly replace "spam" with "schmetterling"
---
"Michael Santovec" wrote in message
...
You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so, look
at the message source (Ctrl-F3). There in the TO, CC or BCC field,
you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with the
group, save to the Drafts folder and look at that message's source. If
you are using Automatically Complete e-mail addresses when composing
(Tools, Options, Send) and you typed in the group name (rather than
selecting from the address book), be sure to use Tools, Check Names
(Ctrl-K) so that the group name becomes underlined. Before you save to
drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the Group
Address List
shows the "Name" that I entered. How can I quickly view or find that
rejected email
address when I only see the person's name?

Earl

And Michael already said:

QP
If you don't have the original message, you can start a new one with the
group, save to the Drafts folder and look at that message's source.
/QP

w
--

Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA


"Dori A Schmetterling" wrote in message
...
Why not just save to Draft, the open message and look at Properties?

I do this in related situations.

DAS

To send an e-mail directly replace "spam" with "schmetterling"
---
"Michael Santovec" wrote in message
...
You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so, look
at the message source (Ctrl-F3). There in the TO, CC or BCC field,
you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with
the group, save to the Drafts folder and look at that message's source.
If you are using Automatically Complete e-mail addresses when composing
(Tools, Options, Send) and you typed in the group name (rather than
selecting from the address book), be sure to use Tools, Check Names
(Ctrl-K) so that the group name becomes underlined. Before you save to
drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the
Group Address List
shows the "Name" that I entered. How can I quickly view or find that
rejected email
address when I only see the person's name?

Earl

teree silja
"Dori A Schmetterling" wrote in message
...
Why not just save to Draft, the open message and look at Properties?

I do this in related situations.

DAS

To send an e-mail directly replace "spam" with "schmetterling"
---
"Michael Santovec" wrote in message
...
You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so, look
at the message source (Ctrl-F3). There in the TO, CC or BCC field,
you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with
the group, save to the Drafts folder and look at that message's source.
If you are using Automatically Complete e-mail addresses when composing
(Tools, Options, Send) and you typed in the group name (rather than
selecting from the address book), be sure to use Tools, Check Names
(Ctrl-K) so that the group name becomes underlined. Before you save to
drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the
Group Address List
shows the "Name" that I entered. How can I quickly view or find that
rejected email
address when I only see the person's name?

Earl

Oh... I suppose I thought that was slightly different.

Season's Greetings!
DAS

To send an e-mail directly replace "spam" with "schmetterling"
---
"Bruce Hagen" wrote in message
...
And Michael already said:

QP
If you don't have the original message, you can start a new one with the
group, save to the Drafts folder and look at that message's source.
/QP

w
--

Bruce Hagen
MS-MVP Outlook Express
Imperial Beach, CA


"Dori A Schmetterling" wrote in message
...
Why not just save to Draft, the open message and look at Properties?

I do this in related situations.

DAS

To send an e-mail directly replace "spam" with "schmetterling"
---
"Michael Santovec" wrote in message
...
You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so,
look at the message source (Ctrl-F3). There in the TO, CC or BCC
field, you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with
the group, save to the Drafts folder and look at that message's
source. If you are using Automatically Complete e-mail addresses when
composing (Tools, Options, Send) and you typed in the group name
(rather than selecting from the address book), be sure to use Tools,
Check Names (Ctrl-K) so that the group name becomes underlined. Before
you save to drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the
Group Address List
shows the "Name" that I entered. How can I quickly view or find that
rejected email
address when I only see the person's name?

Earl

þþÊã ßÊÇÈÉ "silja" silkree"not.ee Ýí ÃÎÈÇÑ
...
teree silja
"Dori A Schmetterling" wrote in message
...
Why not just save to Draft, the open message and look at Properties?

I do this in related situations.

DAS

To send an e-mail directly replace "spam" with "schmetterling"
---
"Michael Santovec" wrote in message
...
You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so,
look at the message source (Ctrl-F3). There in the TO, CC or BCC
field, you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with
the group, save to the Drafts folder and look at that message's
source. If you are using Automatically Complete e-mail addresses when
composing (Tools, Options, Send) and you typed in the group name
(rather than selecting from the address book), be sure to use Tools,
Check Names (Ctrl-K) so that the group name becomes underlined. Before
you save to drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the
Group Address List
shows the "Name" that I entered. How can I quickly view or find that
rejected email
address when I only see the person's name?

Earl

þþÊã ßÊÇÈÉ "ÚãÇÑ" Ýí ÃÎÈÇÑ
...

þþÊã ßÊÇÈÉ "silja" silkree"not.ee Ýí ÃÎÈÇÑ
...
teree silja
"Dori A Schmetterling" wrote in message
...
Why not just save to Draft, the open message and look at Properties?

I do this in related situations.

DAS

To send an e-mail directly replace "spam" with "schmetterling"
---
"Michael Santovec" wrote in message
...
You are welcome and thanks for posting back.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
Thanks, that "source" info is what I needed.
Earl

"Michael Santovec" wrote in message
...
That's a problem. The address book doesn't support that well.

Do you still have the original message in the Sent Items? If so,
look at the message source (Ctrl-F3). There in the TO, CC or BCC
field, you'll see the names and e-mail addresses.

If you have a real long list and it's hard to spot the address, then
save the message to an EML file, and open the EML file in Notepad and
use the Find function.

If you don't have the original message, you can start a new one with
the group, save to the Drafts folder and look at that message's
source. If you are using Automatically Complete e-mail addresses when
composing (Tools, Options, Send) and you typed in the group name
(rather than selecting from the address book), be sure to use Tools,
Check Names (Ctrl-K) so that the group name becomes underlined.
Before you save to drafts.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm



"Earl Partridge" wrote in message
...
OE6...
I have created a Group address by adding Names and Email Address
directly, where
the addresses are not part of my regular address book.

When I get a rejected message, it shows the "Email Address" that was
rejected, and
I want to remove that address from my Group Address, however, the
Group Address List
shows the "Name" that I entered. How can I quickly view or find
that rejected email
address when I only see the person's name?

Earl