If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Fill format doesn't work on shapes created by user
I made a shape using the arcs and lines. The shape is closed. I grouped the
elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? |
#2
|
|||
|
|||
Fill format doesn't work on shapes created by user
This looked an easy one I could resolve. Nevertheless I fell in the trap and
experienced the same problem. The first thing I found in the help system that we can still ad a shadow if the shape is not closed. The shadow worked. Then I found in the Help system : "To close the shape, drag the endpoint of the last segment you create over the vertex at the beginning of the first segment. The shape becomes opaque, indicating it’s a closed shape." Maybe you had trouble with the snap and glue, so that it did not become closed. Grouping has nothing to do with it. Try drawing a rectangle with lines and experience the opaqueness. "jlschuck" wrote: I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? |
#3
|
|||
|
|||
Fill format doesn't work on shapes created by user
My initial thought is to use "Shape-Operations-Join" instead of grouping
to turn lines into a fillable shape. Best Regards, Joe Mako "jlschuck" wrote in message ... I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? |
#4
|
|||
|
|||
Fill format doesn't work on shapes created by user
Fill is based on individual Geometry sections within the ShapeSheet. Simply
drawing a selection of 1D shapes and then grouping won't necessarily create a single path and so there won't be anything to fill. As Joe suggests you need to 'Join' your lines to create one or more Geometry sections that can then accept a fill. For a bit of background reading take a look at this link: http://msdn2.microsoft.com/en-us/lib...ffice.10).aspx Best regards John John Goldsmith www.visualSignals.typepad.co.uk www.visualSignals.co.uk "jlschuck" wrote in message ... I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? |
#5
|
|||
|
|||
Fill format doesn't work on shapes created by user
I did my little experiments in Visio 2003. In 2007 it does not work any
more. I give up. "Philippe C." wrote: This looked an easy one I could resolve. Nevertheless I fell in the trap and experienced the same problem. The first thing I found in the help system that we can still ad a shadow if the shape is not closed. The shadow worked. Then I found in the Help system : "To close the shape, drag the endpoint of the last segment you create over the vertex at the beginning of the first segment. The shape becomes opaque, indicating it’s a closed shape." Maybe you had trouble with the snap and glue, so that it did not become closed. Grouping has nothing to do with it. Try drawing a rectangle with lines and experience the opaqueness. "jlschuck" wrote: I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? |
#6
|
|||
|
|||
Fill format doesn't work on shapes created by user
Two other points:
1) Open the shapesheet and check each geometry section to see what the NoFill value is. 2) Open the shapesheet and make sure the last entry in each Geometry section refers to the first entry. This will guarantee a closed loop. John... Visio MVP Need stencils or ideas? http://visio.mvps.org/3rdparty.htm Need VBA examples? http://visio.mvps.org/VBA.htm Visio Wishlist http://visio.mvps.org/wish_list.htm "John Goldsmith" wrote in message ... Fill is based on individual Geometry sections within the ShapeSheet. Simply drawing a selection of 1D shapes and then grouping won't necessarily create a single path and so there won't be anything to fill. As Joe suggests you need to 'Join' your lines to create one or more Geometry sections that can then accept a fill. For a bit of background reading take a look at this link: http://msdn2.microsoft.com/en-us/lib...ffice.10).aspx Best regards John John Goldsmith www.visualSignals.typepad.co.uk www.visualSignals.co.uk "jlschuck" wrote in message ... I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? |
#7
|
|||
|
|||
Fill format doesn't work on shapes created by user
On Fri, 11 Jan 2008 05:56:00 -0800, jlschuck
wrote: I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? Have you really grouped the shapes? If so then that may be the problem. You may be trying to fill the group which probably won't work as the group is just a container for the other shapes. -- Regards, Paul Herber, Sandrila Ltd. Electronics for Visio http://www.electronics.sandrila.co.uk/ |
#8
|
|||
|
|||
Fill format doesn't work on shapes created by user
The other thing is that only a shape (not a group) can be filled and the
Geometry sections for that shape must describe a closed path. The path may look closed, but the only guaranteed way to check is to examine the Geometry sections. John... Visio MVP Need stencils or ideas? http://visio.mvps.org/3rdparty.htm Need VBA examples? http://visio.mvps.org/VBA.htm Visio Wishlist http://visio.mvps.org/wish_list.htm "Paul Herber" wrote in message ell.net... On Fri, 11 Jan 2008 05:56:00 -0800, jlschuck wrote: I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? Have you really grouped the shapes? If so then that may be the problem. You may be trying to fill the group which probably won't work as the group is just a container for the other shapes. -- Regards, Paul Herber, Sandrila Ltd. Electronics for Visio http://www.electronics.sandrila.co.uk/ |
#9
|
|||
|
|||
Fill
I can't say what is wrong, but I find a way to fill that kind of shapes.
Draw a rectangle over your shape; Fill it with some color; Select your shape and rectangle; Shape Operations Fragment; There now will be filled copy of your shape. jlschuc wrote: Fill format doesn't work on shapes created by user 11-Jan-08 I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? Previous Posts In This Thread: On Friday, January 11, 2008 8:56 AM jlschuc wrote: Fill format doesn't work on shapes created by user I made a shape using the arcs and lines. The shape is closed. I grouped the elements and then tried to format the fill. The dialog box for the format fill function indicates that the fill of the shape is changed to the new color, however when I look at the shape on the drawing it is still white. Does anyone know what is wrong? On Friday, January 11, 2008 9:46 AM Philippe wrote: This looked an easy one I could resolve. This looked an easy one I could resolve. Nevertheless I fell in the trap and experienced the same problem. The first thing I found in the help system that we can still ad a shadow if the shape is not closed. The shadow worked. Then I found in the Help system : "To close the shape, drag the endpoint of the last segment you create over the vertex at the beginning of the first segment. The shape becomes opaque, indicating it???s a closed shape." Maybe you had trouble with the snap and glue, so that it did not become closed. Grouping has nothing to do with it. Try drawing a rectangle with lines and experience the opaqueness. "jlschuck" wrote: On Friday, January 11, 2008 10:50 AM Joe Mako wrote: My initial thought is to use "Shape-Operations-Join" instead of grouping to My initial thought is to use "Shape-Operations-Join" instead of grouping to turn lines into a fillable shape. Best Regards, Joe Mako On Friday, January 11, 2008 11:08 AM John Goldsmith wrote: Fill is based on individual Geometry sections within the ShapeSheet. Fill is based on individual Geometry sections within the ShapeSheet. Simply drawing a selection of 1D shapes and then grouping won't necessarily create a single path and so there won't be anything to fill. As Joe suggests you need to 'Join' your lines to create one or more Geometry sections that can then accept a fill. For a bit of background reading take a look at this link: http://msdn2.microsoft.com/en-us/lib...ffice.10).aspx Best regards John John Goldsmith www.visualSignals.typepad.co.uk www.visualSignals.co.uk "jlschuck" wrote in message ... On Friday, January 11, 2008 1:36 PM Philippe wrote: I did my little experiments in Visio 2003. In 2007 it does not work any more. I did my little experiments in Visio 2003. In 2007 it does not work any more. I give up. "Philippe C." wrote: On Friday, January 11, 2008 11:34 PM John Marshall, MVP wrote: Fill format doesn't work on shapes created by user Two other points: 1) Open the shapesheet and check each geometry section to see what the NoFill value is. 2) Open the shapesheet and make sure the last entry in each Geometry section refers to the first entry. This will guarantee a closed loop. John... Visio MVP Need stencils or ideas? http://visio.mvps.org/3rdparty.htm Need VBA examples? http://visio.mvps.org/VBA.htm Visio Wishlist http://visio.mvps.org/wish_list.htm "John Goldsmith" wrote in message ... On Saturday, January 12, 2008 7:42 PM Paul Herber wrote: Fill format doesn't work on shapes created by user On Fri, 11 Jan 2008 05:56:00 -0800, jlschuck wrote: Have you really grouped the shapes? If so then that may be the problem. You may be trying to fill the group which probably won't work as the group is just a container for the other shapes. -- Regards, Paul Herber, Sandrila Ltd. Electronics for Visio http://www.electronics.sandrila.co.uk/ On Tuesday, January 15, 2008 10:29 PM John Marshall, MVP wrote: The other thing is that only a shape (not a group) can be filled and the The other thing is that only a shape (not a group) can be filled and the Geometry sections for that shape must describe a closed path. The path may look closed, but the only guaranteed way to check is to examine the Geometry sections. John... Visio MVP Need stencils or ideas? http://visio.mvps.org/3rdparty.htm Need VBA examples? http://visio.mvps.org/VBA.htm Visio Wishlist http://visio.mvps.org/wish_list.htm "Paul Herber" wrote in message ell.net... Submitted via EggHeadCafe - Software Developer Portal of Choice IIS 7.0 Extensionless UrlRewriting (Short urls) http://www.eggheadcafe.com/tutorials...nless-url.aspx |
Thread Tools | |
Display Modes | |
|
|