![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
We have two versions of MS Office installed in our office – 97 & 2003
We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink “ \\servername\shared\PUBLIC\filename.xls” I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can’t remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It’s all done remotely and they can’t do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#2
|
|||
|
|||
![]()
FollowHyperlink should open whatever application is associated with the file
extension. I'm guessing that if you double-click on the file in Windows Explorer, Excel 97 opens as well. If that's the case, your options would seem to be change the file association, or else use Automation to open an instance of Excel 2003 and then load the workbook into that instance. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office – 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink “ \\servername\shared\PUBLIC\filename.xls” I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can’t remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It’s all done remotely and they can’t do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#3
|
|||
|
|||
![]()
Doug,
Thanks for your reply. I have set my file associations so that Excel opens in 2003. Every Excel file I click in windows explorer does open in 2003. It's when I use a command button to open the file that it opens in 97. How do I use automation to load Excel 2003 and then load the workbook? Steve. "Douglas J. Steele" wrote in message ... FollowHyperlink should open whatever application is associated with the file extension. I'm guessing that if you double-click on the file in Windows Explorer, Excel 97 opens as well. If that's the case, your options would seem to be change the file association, or else use Automation to open an instance of Excel 2003 and then load the workbook into that instance. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office - 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink " \\servername\shared\PUBLIC\filename.xls" I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can't remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It's all done remotely and they can't do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#4
|
|||
|
|||
![]()
Hmm. That's odd. I thought FollowHyperlink respected the file associations.
One other thing to try before going to the trouble of using Automation. Try the ShellExecute API, as illustrated in http://www.mvps.org/access/api/api0018.htm at "The Access Web" -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/djsteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Doug, Thanks for your reply. I have set my file associations so that Excel opens in 2003. Every Excel file I click in windows explorer does open in 2003. It's when I use a command button to open the file that it opens in 97. How do I use automation to load Excel 2003 and then load the workbook? Steve. "Douglas J. Steele" wrote in message ... FollowHyperlink should open whatever application is associated with the file extension. I'm guessing that if you double-click on the file in Windows Explorer, Excel 97 opens as well. If that's the case, your options would seem to be change the file association, or else use Automation to open an instance of Excel 2003 and then load the workbook into that instance. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office - 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink " \\servername\shared\PUBLIC\filename.xls" I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can't remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It's all done remotely and they can't do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#5
|
|||
|
|||
![]()
Thanks Douglas for the advice but I'm afraid the solution is far above my
skill level at the moment Steve "Douglas J. Steele" wrote in message ... Hmm. That's odd. I thought FollowHyperlink respected the file associations. One other thing to try before going to the trouble of using Automation. Try the ShellExecute API, as illustrated in http://www.mvps.org/access/api/api0018.htm at "The Access Web" -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/djsteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Doug, Thanks for your reply. I have set my file associations so that Excel opens in 2003. Every Excel file I click in windows explorer does open in 2003. It's when I use a command button to open the file that it opens in 97. How do I use automation to load Excel 2003 and then load the workbook? Steve. "Douglas J. Steele" wrote in message ... FollowHyperlink should open whatever application is associated with the file extension. I'm guessing that if you double-click on the file in Windows Explorer, Excel 97 opens as well. If that's the case, your options would seem to be change the file association, or else use Automation to open an instance of Excel 2003 and then load the workbook into that instance. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office - 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink " \\servername\shared\PUBLIC\filename.xls" I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can't remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It's all done remotely and they can't do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#6
|
|||
|
|||
![]()
Actually, using that approach is far simpler than Automation would be!
Go into the VB Editor and create a new module (not a class module nor a module associated with a form or report) Copy everything between Code Start and Code End on the web page, and paste it into the new module. Save the module, giving it a unique name (something like mdlShellExecute should work fine) In your Click event, use Call fHandleFile("\\servername\shared\PUBLIC\filename.x ls") instead of the FollowHyperlink method. -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/DJSteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Thanks Douglas for the advice but I'm afraid the solution is far above my skill level at the moment Steve "Douglas J. Steele" wrote in message ... Hmm. That's odd. I thought FollowHyperlink respected the file associations. One other thing to try before going to the trouble of using Automation. Try the ShellExecute API, as illustrated in http://www.mvps.org/access/api/api0018.htm at "The Access Web" -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/djsteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Doug, Thanks for your reply. I have set my file associations so that Excel opens in 2003. Every Excel file I click in windows explorer does open in 2003. It's when I use a command button to open the file that it opens in 97. How do I use automation to load Excel 2003 and then load the workbook? Steve. "Douglas J. Steele" wrote in message ... FollowHyperlink should open whatever application is associated with the file extension. I'm guessing that if you double-click on the file in Windows Explorer, Excel 97 opens as well. If that's the case, your options would seem to be change the file association, or else use Automation to open an instance of Excel 2003 and then load the workbook into that instance. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office - 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink " \\servername\shared\PUBLIC\filename.xls" I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can't remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It's all done remotely and they can't do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#7
|
|||
|
|||
![]()
Thanks, I'll give it a try when I get back to the office
Steve "Douglas J. Steele" wrote in message ... Actually, using that approach is far simpler than Automation would be! Go into the VB Editor and create a new module (not a class module nor a module associated with a form or report) Copy everything between Code Start and Code End on the web page, and paste it into the new module. Save the module, giving it a unique name (something like mdlShellExecute should work fine) In your Click event, use Call fHandleFile("\\servername\shared\PUBLIC\filename.x ls") instead of the FollowHyperlink method. -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/DJSteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Thanks Douglas for the advice but I'm afraid the solution is far above my skill level at the moment Steve "Douglas J. Steele" wrote in message ... Hmm. That's odd. I thought FollowHyperlink respected the file associations. One other thing to try before going to the trouble of using Automation. Try the ShellExecute API, as illustrated in http://www.mvps.org/access/api/api0018.htm at "The Access Web" -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/djsteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Doug, Thanks for your reply. I have set my file associations so that Excel opens in 2003. Every Excel file I click in windows explorer does open in 2003. It's when I use a command button to open the file that it opens in 97. How do I use automation to load Excel 2003 and then load the workbook? Steve. "Douglas J. Steele" wrote in message ... FollowHyperlink should open whatever application is associated with the file extension. I'm guessing that if you double-click on the file in Windows Explorer, Excel 97 opens as well. If that's the case, your options would seem to be change the file association, or else use Automation to open an instance of Excel 2003 and then load the workbook into that instance. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office - 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink " \\servername\shared\PUBLIC\filename.xls" I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can't remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It's all done remotely and they can't do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#8
|
|||
|
|||
![]()
Hi
Finally got it working with: Shell """C:\Program Files\Microsoft Office\office11\excel.exe"" ""\\server\shared\public\folder\file.xls""", vbMaximizedFocus Thanks for all your help Steve "Steve Goodrich" wrote in message news ![]() Thanks, I'll give it a try when I get back to the office Steve "Douglas J. Steele" wrote in message ... Actually, using that approach is far simpler than Automation would be! Go into the VB Editor and create a new module (not a class module nor a module associated with a form or report) Copy everything between Code Start and Code End on the web page, and paste it into the new module. Save the module, giving it a unique name (something like mdlShellExecute should work fine) In your Click event, use Call fHandleFile("\\servername\shared\PUBLIC\filename.x ls") instead of the FollowHyperlink method. -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/DJSteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Thanks Douglas for the advice but I'm afraid the solution is far above my skill level at the moment Steve "Douglas J. Steele" wrote in message ... Hmm. That's odd. I thought FollowHyperlink respected the file associations. One other thing to try before going to the trouble of using Automation. Try the ShellExecute API, as illustrated in http://www.mvps.org/access/api/api0018.htm at "The Access Web" -- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/djsteele (no e-mails, please!) "Steve Goodrich" wrote in message ... Doug, Thanks for your reply. I have set my file associations so that Excel opens in 2003. Every Excel file I click in windows explorer does open in 2003. It's when I use a command button to open the file that it opens in 97. How do I use automation to load Excel 2003 and then load the workbook? Steve. "Douglas J. Steele" wrote in message ... FollowHyperlink should open whatever application is associated with the file extension. I'm guessing that if you double-click on the file in Windows Explorer, Excel 97 opens as well. If that's the case, your options would seem to be change the file association, or else use Automation to open an instance of Excel 2003 and then load the workbook into that instance. -- Doug Steele, Microsoft Access MVP http://I.Am/DougSteele (no private e-mails, please) "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office - 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink " \\servername\shared\PUBLIC\filename.xls" I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can't remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It's all done remotely and they can't do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#9
|
|||
|
|||
![]() "Steve Goodrich" wrote in message ... We have two versions of MS Office installed in our office - 97 & 2003 We use Access 97 and Excel, Word and PowerPoint 2003 The file types are associated with the correct programs, so double clicking an Excel file for example will open it using Excel 2003. I have an Access 97 db with a command button on the form that when clicked opens an Excel file using the FollowHyperlink code.E.g. followhyperlink " \\servername\shared\PUBLIC\filename.xls" I have also tried to enter the hyperlink on the format tab on the property sheet On both occasions the file opens with Excel 97 Is there a method that I can use that will open the file in Excel 2003 All other files/shortcuts open with 2003 when double clicked I tried to get Office 97 uninstalled except for Access 97 but we need photo editor 97 and was informed by our tech guy that they can't remove word,excel & PowerPoint 97 and leave photo editor on because of the way our company has it packaged. It's all done remotely and they can't do custom installs/uninstalls. All I want to do is open an Excel file using the 2003 version from a command button on my form. Any help would be appreciated Steve |
#10
|
|||
|
|||
![]()
I simply passed this onto a colleague who was doing a little analysis on that
|
Thread Tools | |
Display Modes | |
|
|