If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Table of Contents - Cross Reference issue
I have noted previous comments from Suzanne and Charles
but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the documnet. Cross-reference seems to get me there on some occasions but most of the actual headings with text (body of what is being said) are not shown. Should those headings have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John |
#2
|
|||
|
|||
Table of Contents - Cross Reference issue
An automatically generated Table of Contents in Word 2000 and later will
automatically include hyperlinks. In Word 97 the page numbers, only, are hyperlinks. They don't have the blue color or underlining, but they are hyperlinks. What you need to be doing is using the built in heading styles to format your headings. Then you don't need to mess around with cross-references for a Table of Contents. There are step-by-step instructions at http://addbalance.com/usersguide/complex_document.htm. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- --------- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... I have noted previous comments from Suzanne and Charles but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the documnet. Cross-reference seems to get me there on some occasions but most of the actual headings with text (body of what is being said) are not shown. Should those headings have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John |
#3
|
|||
|
|||
Table of Contents - Cross Reference issue
Thanks Charles...I am trying to follow your instructions
from the website and now have those little markers that appear on each line, how do I get rid of these (now appearing to affect every Word doc). How do I get rid of these so that they are not permanent, whilst I try to work out what to do nextr. Many thanks John -----Original Message----- An automatically generated Table of Contents in Word 2000 and later will automatically include hyperlinks. In Word 97 the page numbers, only, are hyperlinks. They don't have the blue color or underlining, but they are hyperlinks. What you need to be doing is using the built in heading styles to format your headings. Then you don't need to mess around with cross-references for a Table of Contents. There are step-by-step instructions at http://addbalance.com/usersguide/complex_document.htm. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ------- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... I have noted previous comments from Suzanne and Charles but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the documnet. Cross-reference seems to get me there on some occasions but most of the actual headings with text (body of what is being said) are not shown. Should those headings have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John . |
#4
|
|||
|
|||
Table of Contents - Cross Reference issue
Little markers like "¶"?
Which side of the line? Each line or each paragraph? Do they print? -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- --------- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "John" wrote in message ... Thanks Charles...I am trying to follow your instructions from the website and now have those little markers that appear on each line, how do I get rid of these (now appearing to affect every Word doc). How do I get rid of these so that they are not permanent, whilst I try to work out what to do nextr. Many thanks John -----Original Message----- An automatically generated Table of Contents in Word 2000 and later will automatically include hyperlinks. In Word 97 the page numbers, only, are hyperlinks. They don't have the blue color or underlining, but they are hyperlinks. What you need to be doing is using the built in heading styles to format your headings. Then you don't need to mess around with cross-references for a Table of Contents. There are step-by-step instructions at http://addbalance.com/usersguide/complex_document.htm. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ------- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... I have noted previous comments from Suzanne and Charles but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the documnet. Cross-reference seems to get me there on some occasions but most of the actual headings with text (body of what is being said) are not shown. Should those headings have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John . |
#5
|
|||
|
|||
Table of Contents - Cross Reference issue
Hi Charles,
Yes like those you have shown. On each line. Each each new document and any already previously=20 saved/held on the PC.. which is most frustrating. They do not print Many thanks John Ps Am finding the web guide a little hard to follow...must=20 be my ignorance (after "Practice: Generate a Table of=20 Contents By Manually Marking Entries" point 3...I got=20 stuck) -----Original Message----- Little markers like "=B6"? Which side of the line? Each line or each paragraph? Do they print? --=20 Charles Kenyon Word New User FAQ & Web Directory:=20 http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented=20 version of Microsoft's Legal Users' Guide)=20 http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is=20 awesome! --------- --------- --------- --------- --------- ------- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "John" wrote in=20 message ... Thanks Charles...I am trying to follow your instructions from the website and now have those little markers that appear on each line, how do I get rid of these (now appearing to affect every Word doc). How do I get rid of these so that they are not=20 permanent, whilst I try to work out what to do nextr. Many thanks John -----Original Message----- An automatically generated Table of Contents in Word=20 2000 and later will automatically include hyperlinks. In Word 97 the page numbers, only, are hyperlinks. They don't have the blue color or underlining, but they are hyperlinks. What you need to be doing is using the built in heading styles to format your headings. Then you don't need to mess around with cross-references for a Table of Contents. There are step-by-step=20 instructions at http://addbalance.com/usersguide/complex_document.htm. --=20 Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word=20 (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ---- --- -- This message is posted to a newsgroup. Please post=20 replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... I have noted previous comments from Suzanne and=20 Charles but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do=20 is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the=20 documnet. Cross-reference seems to get me there on some=20 occasions but most of the actual headings with text (body of=20 what is being said) are not shown. Should those headings have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John . . |
#6
|
|||
|
|||
Table of Contents - Cross Reference issue
Re the little gray ¶s
Nonprinting characters can be turned off and on by clicking ¶ in the Standard toolbar. If that doesn't work, check the View settings in the Tools | Options menu. See here for more info, and an explanation of how nonprinting characters can be extremely useful: http://word.mvps.org/FAQs/Formatting/NonPrintChars.htm An alternate set of TOC instructions: How to create a table of contents in Microsoft Word http://www.ShaunaKelly.com/word/toc/CreateATOC.html DM " wrote: Hi Charles, Yes like those you have shown. On each line. Each each new document and any already previously saved/held on the PC.. which is most frustrating. They do not print Many thanks John Ps Am finding the web guide a little hard to follow...must be my ignorance (after "Practice: Generate a Table of Contents By Manually Marking Entries" point 3...I got stuck) -----Original Message----- Little markers like "¶"? Which side of the line? Each line or each paragraph? Do they print? -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ------- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "John" wrote in message ... Thanks Charles...I am trying to follow your instructions from the website and now have those little markers that appear on each line, how do I get rid of these (now appearing to affect every Word doc). How do I get rid of these so that they are not permanent, whilst I try to work out what to do nextr. Many thanks John -----Original Message----- An automatically generated Table of Contents in Word 2000 and later will automatically include hyperlinks. In Word 97 the page numbers, only, are hyperlinks. They don't have the blue color or underlining, but they are hyperlinks. What you need to be doing is using the built in heading styles to format your headings. Then you don't need to mess around with cross-references for a Table of Contents. There are step-by-step instructions at http://addbalance.com/usersguide/complex_document.htm. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ---- --- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... I have noted previous comments from Suzanne and Charles but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the documnet. Cross-reference seems to get me there on some occasions but most of the actual headings with text (body of what is being said) are not shown. Should those headings have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John . . |
#7
|
|||
|
|||
Table of Contents - Cross Reference issue
Hi Dayo,
Thank for that, I will have a look at the site you have nominated as well. I do not suppose you know how to check the speed f a hard drive? I thought of hitting the "Del" key at start up to check the BIOS but that did not help. I have also tried Properties in My Computer.I have 2 Pc's here both with various version of Win98. Any guidance appreciated. Thanks John |
#8
|
|||
|
|||
Table of Contents - Cross Reference issue
Dayo has answered your primary question. However, if they are on each line
this means you are not using Word correctly. Those are paragraph marks and should be at the end of each paragraph. You should be letting Word wrap your lines by itself and setting where that will happen using margins and paragraph formatting for indents. Pressing the Enter key at the end of each line, as if using a typewriter, makes your work much more difficult to edit. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- --------- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... Hi Charles, Yes like those you have shown. On each line. Each each new document and any already previously saved/held on the PC.. which is most frustrating. They do not print Many thanks John Ps Am finding the web guide a little hard to follow...must be my ignorance (after "Practice: Generate a Table of Contents By Manually Marking Entries" point 3...I got stuck) -----Original Message----- Little markers like "¶"? Which side of the line? Each line or each paragraph? Do they print? -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ------- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "John" wrote in message ... Thanks Charles...I am trying to follow your instructions from the website and now have those little markers that appear on each line, how do I get rid of these (now appearing to affect every Word doc). How do I get rid of these so that they are not permanent, whilst I try to work out what to do nextr. Many thanks John -----Original Message----- An automatically generated Table of Contents in Word 2000 and later will automatically include hyperlinks. In Word 97 the page numbers, only, are hyperlinks. They don't have the blue color or underlining, but they are hyperlinks. What you need to be doing is using the built in heading styles to format your headings. Then you don't need to mess around with cross-references for a Table of Contents. There are step-by-step instructions at http://addbalance.com/usersguide/complex_document.htm. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ---- --- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... I have noted previous comments from Suzanne and Charles but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the documnet. Cross-reference seems to get me there on some occasions but most of the actual headings with text (body of what is being said) are not shown. Should those headings have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John . . |
#9
|
|||
|
|||
Table of Contents - Cross Reference issue
Thanks again Charles...point noted.
Do you by any chance know the answer to my other hard=20 drive query? Any further assistance again gratefully=20 received. John -----Original Message----- Dayo has answered your primary question. However, if they=20 are on each line this means you are not using Word correctly. Those are=20 paragraph marks and should be at the end of each paragraph. You should be=20 letting Word wrap your lines by itself and setting where that will happen using=20 margins and paragraph formatting for indents. Pressing the Enter key=20 at the end of each line, as if using a typewriter, makes your work much more=20 difficult to edit. --=20 Charles Kenyon Word New User FAQ & Web Directory:=20 http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented=20 version of Microsoft's Legal Users' Guide)=20 http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is=20 awesome! --------- --------- --------- --------- --------- ------- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. wrote in message ... Hi Charles, Yes like those you have shown. On each line. Each each new document and any already previously saved/held on the PC.. which is most frustrating. They do not print Many thanks John Ps Am finding the web guide a little hard to follow...must be my ignorance (after "Practice: Generate a Table of Contents By Manually Marking Entries" point 3...I got stuck) -----Original Message----- Little markers like "=B6"? Which side of the line? Each line or each paragraph? Do they print? --=20 Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- ------ - -- This message is posted to a newsgroup. Please post=20 replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "John" wrote in message ... Thanks Charles...I am trying to follow your=20 instructions from the website and now have those little markers that appear on each line, how do I get rid of these (now appearing to affect every Word doc). How do I get rid of these so that they are not permanent, whilst I try to work out what to do nextr. Many thanks John -----Original Message----- An automatically generated Table of Contents in Word 2000 and later will automatically include hyperlinks. In Word 97 the page numbers, only, are hyperlinks. They don't have the blue color or underlining, but they are hyperlinks. What you need to be doing is using the built in=20 heading styles to format your headings. Then you don't need to mess around with cross-references for a Table of Contents. There are step-by-step instructions at http://addbalance.com/usersguide/complex_document.htm. --=20 Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which=20 is awesome! --------- --------- --------- --------- --------- --- - --- -- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can=20 learn from my ignorance and your wisdom. wrote in message ... I have noted previous comments from Suzanne and Charles but would like some further assistance in idiot form please. I have a table which has contents. 1 is "Index", 2 is "Introduction" and so on. What I would like to do is to have the reader click on the word i.e. Index or Introduction or whatever and that then automatically show (take the reader to ) that section within the documnet. Cross-reference seems to get me there on some occasions but most of the actual headings with text (body of what is being said) are not shown. Should those headings=20 have been created in a particular manner or am I not using the option in Cross Reference correcly? Any assistance is appreciated John . . . |
#10
|
|||
|
|||
Table of Contents - Cross Reference issue
On Fri, 21 May 2004 06:34:19 -0700, "John"
wrote: I do not suppose you know how to check the speed f a hard drive? I thought of hitting the "Del" key at start up to check the BIOS but that did not help. I have also tried Properties in My Computer.I have 2 Pc's here both with various version of Win98. If you mean that you want a benchmark program to measure your hard drive speed, look for HDTach. Google should find it for you. If you mean that you want to know the drive ratings (RPM, access time, etc.) th ebest bet is to get the model number (either by opening the box and reading it off the drive or by looking in Device Manager), and then check the drive manufacturer's web site. If neither of these works, ask in the newsgroup: comp.sys.ibm.pc.hardware.storage Bob S |
Thread Tools | |
Display Modes | |
|
|