If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
how to remove blank last page
sorry, I have found the Table properties, it was around.
I changed the Text wrapping to none. After changing, the section break went down underneath the table. Before changing: The section break was showed on the top of the table (landscape). The unwanted blank page remains - portrait and the beginning of the 1st row with a ¶ sign. "Doug Robbins - Word MVP" wrote: What is the orientation of the unwanted last page? Also in the Table properties dialog, make sure that the Text wrapping is set to None. If you click on the Show/Hide button (¶), what do you see after the table? -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#12
|
|||
|
|||
how to remove blank last page
If the orientation of the unwanted last page is portrait, then there *must*
be a section break between it and the landscape page. Switching to Normal/Draft view should make it possible for you to see and delete this break, but before you do that, change the orientation of the last section to landscape; otherwise the table section will become portrait and will have to be changed. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news The orientation of the unwanted last page = portrait. I can find "Text Wrap" in the Table properties dialog ??? I did click on the Show/Hide button (¶), there is nothing shown after the table (i.e. page 6). Yet the unwanted last page, the 1st sign (1st row) is with this ¶ thanks karen "Doug Robbins - Word MVP" wrote: What is the orientation of the unwanted last page? Also in the Table properties dialog, make sure that the Text wrapping is set to None. If you click on the Show/Hide button (¶), what do you see after the table? -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#13
|
|||
|
|||
how to remove blank last page
1 pt. didn't work and I did reduce the table for more than 3 rows.
What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#14
|
|||
|
|||
how to remove blank last page
Format | Font | Hidden, but it won't work, either, because you clearly have
a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#15
|
|||
|
|||
how to remove blank last page
"Hidden" is a text attribute available in the Font dialog box.
Alternatively, you can apply it by pressing Ctrl+Shift+H. -- Stefan Blom Microsoft Word MVP "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#16
|
|||
|
|||
how to remove blank last page
Note that you can format the section break as hidden (or 1 pt). Of course,
if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#17
|
|||
|
|||
how to remove blank last page
Since the landscape section is the last content page in the document, a
section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#18
|
|||
|
|||
how to remove blank last page
True. (As I wrote, I didn't read through the entire thread.)
-- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Since the landscape section is the last content page in the document, a section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#19
|
|||
|
|||
how to remove blank last page
That's what I would like to delete. It doesn't let me to.
Also if I delete the section break, the landscape format is gone for page, returns to the same orientation as "portrait" as the other pages. (1st 5 pages = portrait, last page is for the table and landscape). "Stefan Blom" wrote: Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . |
#20
|
|||
|
|||
how to remove blank last page
Note that a section break stores the formatting of the previous section.
When you delete it, Word will use the formatting of the following break (or the section formatting stored in the final paragraph mark if you are deleting the final section break of a document). After you've deleted the break, change the orientation back to Landscape using the Page Setup dialog box. See also the "If you really want to delete the temporary section break ..." section of the article at http://word.mvps.org/faqs/formatting...thSections.htm. -- Stefan Blom Microsoft Word MVP "KarenY" wrote in message ... That's what I would like to delete. It doesn't let me to. Also if I delete the section break, the landscape format is gone for page, returns to the same orientation as "portrait" as the other pages. (1st 5 pages = portrait, last page is for the table and landscape). "Stefan Blom" wrote: Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . |
Thread Tools | |
Display Modes | |
|
|