If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe
I continuously get an err message when I attempt to launch Outlook as the
Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#2
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe
Close Outlook and rename the frmcache.dat file to .old
-- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#3
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.
That resolved my problem. Thank you!
"Roady [MVP]" wrote: Close Outlook and rename the frmcache.dat file to .old -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#4
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.
You're welcome! :-)
-- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... That resolved my problem. Thank you! "Roady [MVP]" wrote: Close Outlook and rename the frmcache.dat file to .old -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#5
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.
I tried this and it did not work for me. Any other suggestions?
"Roady [MVP]" wrote: Close Outlook and rename the frmcache.dat file to .old -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#6
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.
Another Suggestion that worked for me and all my users, was to recreate a new
login because it appeared as though the permissions were over written when 2007 Office was installed on the system. When the New Username was reinitialized it worked fine and no more errors dealing with the infamous VBScript.dll. MS needs to allow the programs that they write to be installed under the Administration user this way when you users logon for the first time to run the application the error does not cause troubles for the users. We run on Vista in our network. Thanks Microsoft. http://www.kakchugi3.com Dan Solodon Disabled American Veteran "Sgbship" wrote: I tried this and it did not work for me. Any other suggestions? "Roady [MVP]" wrote: Close Outlook and rename the frmcache.dat file to .old -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#7
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.
In my case ...AppData\Local\Microsoft\FORMS - "FORMS" is a file with no
extension. A file with 0 kB. Any ideas? "Roady [MVP]" wrote: Close Outlook and rename the frmcache.dat file to .old -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#8
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.
How about this....
Within Microsoft Outlook, select Tools Options Other tab Advanced Options button Custom Forms. Change temporary storage space to a different number* OK out of the dialogs and then reboot computer. Still get the error at this point? * I believe the default value is 2048. I would change it to 4096. If it reads 4096, change it back to 2048. "Suso" wrote in message news In my case ...AppData\Local\Microsoft\FORMS - "FORMS" is a file with no extension. A file with 0 kB. Any ideas? "Roady [MVP]" wrote: Close Outlook and rename the frmcache.dat file to .old -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#9
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.
Such a simple solution
Worked for me thanks "Roady [MVP]" wrote: Close Outlook and rename the frmcache.dat file to .old -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more ----- "Eddie" wrote in message ... I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
#10
|
|||
|
|||
Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe
"Eddie" wrote: I continuously get an err message when I attempt to launch Outlook as the Admin user. I've uninstalled/ reinstalled, Run Regsvr32.exe and have changed language (support section for Microsoft) to no avail. Ironically one of the users on my computer with a standard level of permissions is able to launch with no issues. I'm open to any suggestions at this point. Exact Err Msg Reads: "Failed to register a VB Script DLL. Reinstall or run Regsvr32.exe Vbscript.dll to self register. The form cache file C:\Users\User\AppData\Local\Microsoft\FORMS\FRMCAC HE.DAT is not valid. Contact your administrator." |
|
Thread Tools | |
Display Modes | |
|
|