If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Database Documenter
Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing
Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#12
|
|||
|
|||
Database Documenter
Do you a default printer installed?
-- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#13
|
|||
|
|||
Database Documenter
Yes, I do. I'm on a network printer and two of us share the printer. My
connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#14
|
|||
|
|||
Database Documenter
Have you tried defaulting to a local printer and seeing if you get the same
results? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message news Yes, I do. I'm on a network printer and two of us share the printer. My connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#15
|
|||
|
|||
Database Documenter
I have "lost" my entire database. Not only does the Documenter not work, I
cannot access my database. Is there a possiblity of a hard drive problem or could my CD have a problem? I removed the Access 2007 program from my computer and reinstalled it. I originally had three databases that I worked with...The one I "lost", a different company database, and Northwinds Sample database. Is there a website for Microsoft that I can download Access instead of using my CD I purchased? Thanks again for all your help. Marilyn "Gina Whipp" wrote: Have you tried defaulting to a local printer and seeing if you get the same results? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message news Yes, I do. I'm on a network printer and two of us share the printer. My connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#16
|
|||
|
|||
Database Documenter
Can you get to anything else? I do not THINK it is the CD BUT it could be a
network issue or harddrive issue but still strange it was only the Documentor that was misbehaving! I have searched the net, Microsoft and newsgroups and can find nothing even close to this issue but not giving up... I may be bald but not giving up! Also, where did you purchase the CD? If it was a store, such as Office Max, or it came preloaded, then I would say for SURE nothing wrong with the CD. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I have "lost" my entire database. Not only does the Documenter not work, I cannot access my database. Is there a possiblity of a hard drive problem or could my CD have a problem? I removed the Access 2007 program from my computer and reinstalled it. I originally had three databases that I worked with...The one I "lost", a different company database, and Northwinds Sample database. Is there a website for Microsoft that I can download Access instead of using my CD I purchased? Thanks again for all your help. Marilyn "Gina Whipp" wrote: Have you tried defaulting to a local printer and seeing if you get the same results? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message news Yes, I do. I'm on a network printer and two of us share the printer. My connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#17
|
|||
|
|||
Database Documenter
In the beginning, it was only a documenter problem on all three databases,
but now I can access the two databases, but the main database that I use every day... I cannot access at all. I have a backup from 12/12/08 that I can access, but that is it. All the changes to my second database is there, and I can still access Northwind, but not my main database.....it has totally vanished or is in that big black hole. I purchased my program at Staples. Could something happen when I deleted the ACCWIZ.....the other day? By the way, I only have one good nerve left and ACCESS is getting on it. Thanks Marilyn "Gina Whipp" wrote: Can you get to anything else? I do not THINK it is the CD BUT it could be a network issue or harddrive issue but still strange it was only the Documentor that was misbehaving! I have searched the net, Microsoft and newsgroups and can find nothing even close to this issue but not giving up... I may be bald but not giving up! Also, where did you purchase the CD? If it was a store, such as Office Max, or it came preloaded, then I would say for SURE nothing wrong with the CD. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I have "lost" my entire database. Not only does the Documenter not work, I cannot access my database. Is there a possiblity of a hard drive problem or could my CD have a problem? I removed the Access 2007 program from my computer and reinstalled it. I originally had three databases that I worked with...The one I "lost", a different company database, and Northwinds Sample database. Is there a website for Microsoft that I can download Access instead of using my CD I purchased? Thanks again for all your help. Marilyn "Gina Whipp" wrote: Have you tried defaulting to a local printer and seeing if you get the same results? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message news Yes, I do. I'm on a network printer and two of us share the printer. My connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#18
|
|||
|
|||
Database Documenter
Knowing that you got your CD at Staples means I am SURE it is not the CD.
Nothing should have happened because you Reinstalled/Repaired your installation so it would put those wizards back. I want to say corruption but it seems to rare that it would effect all THREE databases at the same time. Let's try a decompile, this is always my second to last resort... If you are unsure how to decompile, please see: http://www.granite.ab.ca/access/decompile.htm about half way down the page. Do NOT forget to make a back-up! -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... In the beginning, it was only a documenter problem on all three databases, but now I can access the two databases, but the main database that I use every day... I cannot access at all. I have a backup from 12/12/08 that I can access, but that is it. All the changes to my second database is there, and I can still access Northwind, but not my main database.....it has totally vanished or is in that big black hole. I purchased my program at Staples. Could something happen when I deleted the ACCWIZ.....the other day? By the way, I only have one good nerve left and ACCESS is getting on it. Thanks Marilyn "Gina Whipp" wrote: Can you get to anything else? I do not THINK it is the CD BUT it could be a network issue or harddrive issue but still strange it was only the Documentor that was misbehaving! I have searched the net, Microsoft and newsgroups and can find nothing even close to this issue but not giving up... I may be bald but not giving up! Also, where did you purchase the CD? If it was a store, such as Office Max, or it came preloaded, then I would say for SURE nothing wrong with the CD. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I have "lost" my entire database. Not only does the Documenter not work, I cannot access my database. Is there a possiblity of a hard drive problem or could my CD have a problem? I removed the Access 2007 program from my computer and reinstalled it. I originally had three databases that I worked with...The one I "lost", a different company database, and Northwinds Sample database. Is there a website for Microsoft that I can download Access instead of using my CD I purchased? Thanks again for all your help. Marilyn "Gina Whipp" wrote: Have you tried defaulting to a local printer and seeing if you get the same results? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message news Yes, I do. I'm on a network printer and two of us share the printer. My connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#19
|
|||
|
|||
Database Documenter
Another thought... have you actually printed any reports? I know you said
you can open them but can you print them? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... In the beginning, it was only a documenter problem on all three databases, but now I can access the two databases, but the main database that I use every day... I cannot access at all. I have a backup from 12/12/08 that I can access, but that is it. All the changes to my second database is there, and I can still access Northwind, but not my main database.....it has totally vanished or is in that big black hole. I purchased my program at Staples. Could something happen when I deleted the ACCWIZ.....the other day? By the way, I only have one good nerve left and ACCESS is getting on it. Thanks Marilyn "Gina Whipp" wrote: Can you get to anything else? I do not THINK it is the CD BUT it could be a network issue or harddrive issue but still strange it was only the Documentor that was misbehaving! I have searched the net, Microsoft and newsgroups and can find nothing even close to this issue but not giving up... I may be bald but not giving up! Also, where did you purchase the CD? If it was a store, such as Office Max, or it came preloaded, then I would say for SURE nothing wrong with the CD. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I have "lost" my entire database. Not only does the Documenter not work, I cannot access my database. Is there a possiblity of a hard drive problem or could my CD have a problem? I removed the Access 2007 program from my computer and reinstalled it. I originally had three databases that I worked with...The one I "lost", a different company database, and Northwinds Sample database. Is there a website for Microsoft that I can download Access instead of using my CD I purchased? Thanks again for all your help. Marilyn "Gina Whipp" wrote: Have you tried defaulting to a local printer and seeing if you get the same results? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message news Yes, I do. I'm on a network printer and two of us share the printer. My connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
#20
|
|||
|
|||
Database Documenter
Yes, I can print reports from my backup main database and the other two
databases. I am also confused on how to decompile. I printed out the instructions, but being "NEW"..... I don't have a clue what they are talking about. "Gina Whipp" wrote: Another thought... have you actually printed any reports? I know you said you can open them but can you print them? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... In the beginning, it was only a documenter problem on all three databases, but now I can access the two databases, but the main database that I use every day... I cannot access at all. I have a backup from 12/12/08 that I can access, but that is it. All the changes to my second database is there, and I can still access Northwind, but not my main database.....it has totally vanished or is in that big black hole. I purchased my program at Staples. Could something happen when I deleted the ACCWIZ.....the other day? By the way, I only have one good nerve left and ACCESS is getting on it. Thanks Marilyn "Gina Whipp" wrote: Can you get to anything else? I do not THINK it is the CD BUT it could be a network issue or harddrive issue but still strange it was only the Documentor that was misbehaving! I have searched the net, Microsoft and newsgroups and can find nothing even close to this issue but not giving up... I may be bald but not giving up! Also, where did you purchase the CD? If it was a store, such as Office Max, or it came preloaded, then I would say for SURE nothing wrong with the CD. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I have "lost" my entire database. Not only does the Documenter not work, I cannot access my database. Is there a possiblity of a hard drive problem or could my CD have a problem? I removed the Access 2007 program from my computer and reinstalled it. I originally had three databases that I worked with...The one I "lost", a different company database, and Northwinds Sample database. Is there a website for Microsoft that I can download Access instead of using my CD I purchased? Thanks again for all your help. Marilyn "Gina Whipp" wrote: Have you tried defaulting to a local printer and seeing if you get the same results? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message news Yes, I do. I'm on a network printer and two of us share the printer. My connection is wireless. "Gina Whipp" wrote: Do you a default printer installed? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Form,Report, Query Wizards all work. Under Database Tools-Analyze-""Nothing Works".... "Gina Whipp" wrote: Pulling hair out... Do the other wizards work? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I removed the one wizard.....nothing. I then Removed the Access 2007 program from my computer and then reinstalled it. The Documenter still doesn't work. ?? "Gina Whipp" wrote: Di you try to remove some of those other wizards. I cannot information on the exact name of the wizard for the documentor. I was hoping it was that one because research on the other ones made me THINK that was the correct one. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... That didn't work either. I do appreciate your help. Thanks, Marilyn "Gina Whipp" wrote: I think its ACWZDAT12.ACCDU. All the wizards are located in C:\Program Files\Microsoft Office 2007\Office12\ACCWIZ, path might be slightly different depending on if you choose a custom path to load the program. I would rename it then do the repair. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... Yes, I did the repair. I am using Access 2007. Marilyn "Gina Whipp" wrote: Marilyn, I am going to Ass-U-Me you also tried to Repair the installation. It sounds like the wizard somehow became corrupt. I would find the wizard file, rename and then reinstall. If you are unsure of the name of the wizard, post back with what version of Access you are using and I will tell you the name of the wizard. -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I reinstalled the program, rebooted and the Analyze, Database Tools, Database Documenter still doesn't work. Any other suggestions??? Thanks Marilyn "Gina Whipp" wrote: Marilyn, Did you try to reinstall? -- Gina Whipp "I feel I have been denied critical, need to know, information!" - Tremors II http://www.regina-whipp.com/index.htm "Marilyn Myers" wrote in message ... I was using the Database Documenter this a.m. When I tried using it later, I received the following message: "The wizard you've requested is not installed or is in a bad state. Please install or reinstall the wizard." What does this mean and what am I supposed to do? Thanks in advance for any help someone can give me. Marilyn |
Thread Tools | |
Display Modes | |
|
|