A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Word » General Discussion
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

The WordPerfect "Reveal Codes" method is so much easier to use.



 
 
Thread Tools Display Modes
  #1  
Old May 4th, 2005, 06:41 PM
Torden
external usenet poster
 
Posts: n/a
Default The WordPerfect "Reveal Codes" method is so much easier to use.

Word's method of showing what the format is for a section leaves much to be
desired and actually makes correcting problems difficult in some
circumstances. Word Perfect's method of showing the formatting in the actual
document, upon request, makes finding and correcting the problems very easy.
I am using Word 2003 and have found unprompted format changes to be a
problem. Trying to fix the changes is cumbersome and sometimes almost
impossible with Word's system. In WordPerfect, the problems are visible (in
the location where they arise and at a glance) with just the click of one
button.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.

http://www.microsoft.com/office/comm...ocmanagemen t
  #2  
Old May 4th, 2005, 07:45 PM
CyberTaz
external usenet poster
 
Posts: n/a
Default

Apparently you have yet to discover the Task Pane. Activate its Reveal
Formatting panel, click in or select some text and find out everything you
need to know... in Plain English, *not* cryptic codes that take half your
lifespan to learn to interpret, let alone modify successfully.

What you are actually finding is that Word is *different*, which does not
necessarily mean *worse* -- and this comes from a
WordStar--WordPerfect--Word convert who's tried about 10 other wp programs
along the way.

Regards |:)

"Torden" wrote:

Word's method of showing what the format is for a section leaves much to be
desired and actually makes correcting problems difficult in some
circumstances. Word Perfect's method of showing the formatting in the actual
document, upon request, makes finding and correcting the problems very easy.
I am using Word 2003 and have found unprompted format changes to be a
problem. Trying to fix the changes is cumbersome and sometimes almost
impossible with Word's system. In WordPerfect, the problems are visible (in
the location where they arise and at a glance) with just the click of one
button.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.

http://www.microsoft.com/office/comm...ocmanagemen t

  #3  
Old May 4th, 2005, 09:13 PM
Charles Kenyon
external usenet poster
 
Posts: n/a
Default

Suggestions for Microsoft should be sent to Microsoft. Despite appearances,
posting them on this newsgroup does not get them to Microsoft. This
newsgroup is monitored by a bunch of volunteer Word users who do not work
for Microsoft.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each program's
methods have strengths and weaknesses; but, if you try to use one of these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. If you are unwilling to take
the time to learn to use Word's methods, you should stick to using Word Pad.
You'll have a lot less grief, although you'll miss out on a lot of raw
power. In the (short) long term spending the time to learn Word will save
you time if you are spending any time at all (more than an hour a day) using
Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and now
regret every day of those years because although that string was still very
hard to push, it kept getting longer and longer, and had some very important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and instead
of pushing a string, you can push a button that turns on the very powerful
text processing machine known as Microsoft Word and it will start doing your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a word,
don't plan on it. I would not recommend using converted documents long-term.
They will be filled with formatting anomolies that will get you at the worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file. Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template. This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from Word
to Word Perfect! Earlier versions went both ways. To fix this, you need to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of the
same name. Note, the change making the file one-way was done as a security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For some
form documents, Word's "online forms" work very well. For more about online
forms, follow the links at
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially Dian
Chapman's series of articles.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.
"Torden" wrote in message
...
Word's method of showing what the format is for a section leaves much to
be
desired and actually makes correcting problems difficult in some
circumstances. Word Perfect's method of showing the formatting in the
actual
document, upon request, makes finding and correcting the problems very
easy.
I am using Word 2003 and have found unprompted format changes to be a
problem. Trying to fix the changes is cumbersome and sometimes almost
impossible with Word's system. In WordPerfect, the problems are visible
(in
the location where they arise and at a glance) with just the click of one
button.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow
this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.

http://www.microsoft.com/office/comm...ocmanagemen t



  #4  
Old May 4th, 2005, 11:51 PM
Daiya Mitchell
external usenet poster
 
Posts: n/a
Default

On 5/4/05 1:13 PM, "Charles Kenyon" wrote:

Suggestions for Microsoft should be sent to Microsoft. Despite appearances,
posting them on this newsgroup does not get them to Microsoft. This
newsgroup is monitored by a bunch of volunteer Word users who do not work
for Microsoft.


It does now. They changed the web news interface so that one of the things
they offer is the ability to post something as a suggestion. Then people
can vote to agree or disagree, and the developers can take note of the
suggestions that get the most votes.

So the web interface has a Post A Suggestion option, and using it
automatically adds the footnote about "go to this link to vote on it." (the
footnote is new, though they had the suggestion mechanism for a while)

DM

  #5  
Old May 5th, 2005, 12:11 AM
Suzanne S. Barnhill
external usenet poster
 
Posts: n/a
Default

Word will never have any exact counterpart of Reveal Codes because there are
no codes to reveal--at least not any that would make any sense to the user.
See these articles for mo

How Word differs from WordPerfect
http://word.mvps.org/FAQs/General/WordVsWordPerfect.htm

Is There Life After “Reveal Codes”?
http://word.mvps.org/FAQs/General/RevealCodes.htm

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Torden" wrote in message
...
Word's method of showing what the format is for a section leaves much to

be
desired and actually makes correcting problems difficult in some
circumstances. Word Perfect's method of showing the formatting in the

actual
document, upon request, makes finding and correcting the problems very

easy.
I am using Word 2003 and have found unprompted format changes to be a
problem. Trying to fix the changes is cumbersome and sometimes almost
impossible with Word's system. In WordPerfect, the problems are visible

(in
the location where they arise and at a glance) with just the click of one
button.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow

this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.


http://www.microsoft.com/office/comm...ocmanagemen t

  #6  
Old April 19th, 2010, 06:54 PM posted to microsoft.public.word.docmanagement
jhtaxlaw
external usenet poster
 
Posts: 1
Default The WordPerfect "Reveal Codes" method is so much easier to use

In the meantime, I have a 400-page document that I have to move from
WordPerfect to Word 2007. I got everything to work, except the headers. Word
seems to make every page a separate section. Anyway, I need the same header
starting on page 2. Header must contain page numbers flushed right and other
information flushed left. If I save file as text file, I will lose all other
formatting. Might as well type the whole thing over. Any other suggestions?

"Charles Kenyon" wrote:

Suggestions for Microsoft should be sent to Microsoft. Despite appearances,
posting them on this newsgroup does not get them to Microsoft. This
newsgroup is monitored by a bunch of volunteer Word users who do not work
for Microsoft.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each program's
methods have strengths and weaknesses; but, if you try to use one of these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. If you are unwilling to take
the time to learn to use Word's methods, you should stick to using Word Pad.
You'll have a lot less grief, although you'll miss out on a lot of raw
power. In the (short) long term spending the time to learn Word will save
you time if you are spending any time at all (more than an hour a day) using
Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and now
regret every day of those years because although that string was still very
hard to push, it kept getting longer and longer, and had some very important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and instead
of pushing a string, you can push a button that turns on the very powerful
text processing machine known as Microsoft Word and it will start doing your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a word,
don't plan on it. I would not recommend using converted documents long-term.
They will be filled with formatting anomolies that will get you at the worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file. Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template. This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from Word
to Word Perfect! Earlier versions went both ways. To fix this, you need to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of the
same name. Note, the change making the file one-way was done as a security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For some
form documents, Word's "online forms" work very well. For more about online
forms, follow the links at
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially Dian
Chapman's series of articles.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.
"Torden" wrote in message
...
Word's method of showing what the format is for a section leaves much to
be
desired and actually makes correcting problems difficult in some
circumstances. Word Perfect's method of showing the formatting in the
actual
document, upon request, makes finding and correcting the problems very
easy.
I am using Word 2003 and have found unprompted format changes to be a
problem. Trying to fix the changes is cumbersome and sometimes almost
impossible with Word's system. In WordPerfect, the problems are visible
(in
the location where they arise and at a glance) with just the click of one
button.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow
this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.

http://www.microsoft.com/office/comm...ocmanagemen t




  #7  
Old April 19th, 2010, 07:50 PM posted to microsoft.public.word.docmanagement
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default The WordPerfect "Reveal Codes" method is so much easier to use

Word creates multiple sections from WP docs because that's the only way it
knows to deal with WP's cavalier attitude toward headers/footers, which can
be turned on or off at will. See
http://sbarnhill.mvps.org/WordFAQs/HeaderFooter.htm for more.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"jhtaxlaw" wrote in message
news
In the meantime, I have a 400-page document that I have to move from
WordPerfect to Word 2007. I got everything to work, except the headers.
Word
seems to make every page a separate section. Anyway, I need the same
header
starting on page 2. Header must contain page numbers flushed right and
other
information flushed left. If I save file as text file, I will lose all
other
formatting. Might as well type the whole thing over. Any other
suggestions?

"Charles Kenyon" wrote:

Suggestions for Microsoft should be sent to Microsoft. Despite
appearances,
posting them on this newsgroup does not get them to Microsoft. This
newsgroup is monitored by a bunch of volunteer Word users who do not work
for Microsoft.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each
program's
methods have strengths and weaknesses; but, if you try to use one of
these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. If you are unwilling to
take
the time to learn to use Word's methods, you should stick to using Word
Pad.
You'll have a lot less grief, although you'll miss out on a lot of raw
power. In the (short) long term spending the time to learn Word will save
you time if you are spending any time at all (more than an hour a day)
using
Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and
now
regret every day of those years because although that string was still
very
hard to push, it kept getting longer and longer, and had some very
important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and
instead
of pushing a string, you can push a button that turns on the very
powerful
text processing machine known as Microsoft Word and it will start doing
your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be
found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from
http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a
word,
don't plan on it. I would not recommend using converted documents
long-term.
They will be filled with formatting anomolies that will get you at the
worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file.
Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template.
This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating
labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new
Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the
ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from
Word
to Word Perfect! Earlier versions went both ways. To fix this, you need
to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of
the
same name. Note, the change making the file one-way was done as a
security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For
some
form documents, Word's "online forms" work very well. For more about
online
forms, follow the links at
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially
Dian
Chapman's series of articles.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to
create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid
embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.
"Torden" wrote in message
...
Word's method of showing what the format is for a section leaves much
to
be
desired and actually makes correcting problems difficult in some
circumstances. Word Perfect's method of showing the formatting in the
actual
document, upon request, makes finding and correcting the problems very
easy.
I am using Word 2003 and have found unprompted format changes to be a
problem. Trying to fix the changes is cumbersome and sometimes almost
impossible with Word's system. In WordPerfect, the problems are
visible
(in
the location where they arise and at a glance) with just the click of
one
button.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the
"I
Agree" button in the message pane. If you do not see the button, follow
this
link to open the suggestion in the Microsoft Web-based Newsreader and
then
click "I Agree" in the message pane.

http://www.microsoft.com/office/comm...ocmanagemen t






 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Please give us REVEAL CODES like WORD PERFECT not reveal codes in. Rachel King General Discussion 39 August 21st, 2009 09:54 PM
Reveal Codes Fao, Sean General Discussion 9 January 31st, 2005 04:06 PM
REVEAL CODES feature like in Word Perfect? MBSS New Users 4 November 21st, 2004 08:47 PM
Where is the option to reveal codes? studenthelp Tables 4 September 8th, 2004 02:32 PM
Reveal Field Codes Larry W Formatting Long Documents 2 May 7th, 2004 10:18 PM


All times are GMT +1. The time now is 04:26 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2004-2024 OfficeFrustration.
The comments are property of their posters.