If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
I get the message "Connecting to Printer" at the bottom of the screen when I
try to use drop down menus in Office, try to paste something, or try to do several other 'easy' commands. When this happens Office freezes temporarily and, several minutes later, closes itself or finally performs the task. Sometimes I can speed up the process by hitting ESC on the keyboard but not always. Also it's usually a 4 or 5 minute process trying to print something on another Vista computer over the network. I don't think the two problems are related, but maybe I'm wrong. Printing to an XP computer over the network is much faster. I'm using Office 2007 Pro Plus on a quad core computer with a good graphics card and 2 gb RAM. Everything else runs fast, even games etc. |
#3
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
Same issue here, your suggestion didn't help.
Still goes out to try and connect to the printer, I use a laptop and I have a network with a Canon PIXMA iP4000 printer connected to a desktop Vista Machine. I print to this printer when in the office, I tried your suggestion, no luck. Same issue occurs when I am on the road - please don't tell me I have to delete the printer when not in the office - crappy 'solution'. "I also get There is insufficient memory or disk space. Word cannot display the requested font." When opening some client documents after several seconds of not responding. The is over a Gig of free RAM and tons of free disk space, this is a bad/incorrect error message. I am a software developer so we can get as technical as you like. Please tell me how I can disable this constant polling of the default printer - very, very, very annoying and buggy. "Beth Melton" wrote: Make sure your printer driver is installed locally. Open your Printers folder, remove the printer, and add it back using the Add Printer Wizard. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "It's Dan" It's wrote in message ... I get the message "Connecting to Printer" at the bottom of the screen when I try to use drop down menus in Office, try to paste something, or try to do several other 'easy' commands. When this happens Office freezes temporarily and, several minutes later, closes itself or finally performs the task. Sometimes I can speed up the process by hitting ESC on the keyboard but not always. Also it's usually a 4 or 5 minute process trying to print something on another Vista computer over the network. I don't think the two problems are related, but maybe I'm wrong. Printing to an XP computer over the network is much faster. I'm using Office 2007 Pro Plus on a quad core computer with a good graphics card and 2 gb RAM. Everything else runs fast, even games etc. |
#4
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
Maybe make the "Microsoft Office Document Image Writer" the default printer?
GoofBoy wrote: Same issue here, your suggestion didn't help. Still goes out to try and connect to the printer, I use a laptop and I have a network with a Canon PIXMA iP4000 printer connected to a desktop Vista Machine. I print to this printer when in the office, I tried your suggestion, no luck. Same issue occurs when I am on the road - please don't tell me I have to delete the printer when not in the office - crappy 'solution'. "I also get There is insufficient memory or disk space. Word cannot display the requested font." When opening some client documents after several seconds of not responding. The is over a Gig of free RAM and tons of free disk space, this is a bad/incorrect error message. I am a software developer so we can get as technical as you like. Please tell me how I can disable this constant polling of the default printer - very, very, very annoying and buggy. "Beth Melton" wrote: Make sure your printer driver is installed locally. Open your Printers folder, remove the printer, and add it back using the Add Printer Wizard. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "It's Dan" It's wrote in message ... I get the message "Connecting to Printer" at the bottom of the screen when I try to use drop down menus in Office, try to paste something, or try to do several other 'easy' commands. When this happens Office freezes temporarily and, several minutes later, closes itself or finally performs the task. Sometimes I can speed up the process by hitting ESC on the keyboard but not always. Also it's usually a 4 or 5 minute process trying to print something on another Vista computer over the network. I don't think the two problems are related, but maybe I'm wrong. Printing to an XP computer over the network is much faster. I'm using Office 2007 Pro Plus on a quad core computer with a good graphics card and 2 gb RAM. Everything else runs fast, even games etc. |
#5
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
It helps in that Word 2007 now runs without pausing every 60 seconds or so to
Connect to the Printer, but of course everything else on the machine that worked just fine with the Canon printer now has to have the printer selected. So, the best proposed solution so far: 1) Change Default printer 2) Start/Use Word 3) Close word 4) Change Default printer back 5) Work with every other application on my machine as normal. So, much for multi-tasking. Thank you Microsoft. Again, why does Word 2007 have to poll the default printer? Why can't this be turned off or made to look at the Microsoft Office Document Image Writer without changing the default printer for the entire machine? If it can be, how? "Bob I" wrote: Maybe make the "Microsoft Office Document Image Writer" the default printer? GoofBoy wrote: Same issue here, your suggestion didn't help. Still goes out to try and connect to the printer, I use a laptop and I have a network with a Canon PIXMA iP4000 printer connected to a desktop Vista Machine. I print to this printer when in the office, I tried your suggestion, no luck. Same issue occurs when I am on the road - please don't tell me I have to delete the printer when not in the office - crappy 'solution'. "I also get There is insufficient memory or disk space. Word cannot display the requested font." When opening some client documents after several seconds of not responding. The is over a Gig of free RAM and tons of free disk space, this is a bad/incorrect error message. I am a software developer so we can get as technical as you like. Please tell me how I can disable this constant polling of the default printer - very, very, very annoying and buggy. "Beth Melton" wrote: Make sure your printer driver is installed locally. Open your Printers folder, remove the printer, and add it back using the Add Printer Wizard. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "It's Dan" It's wrote in message ... I get the message "Connecting to Printer" at the bottom of the screen when I try to use drop down menus in Office, try to paste something, or try to do several other 'easy' commands. When this happens Office freezes temporarily and, several minutes later, closes itself or finally performs the task. Sometimes I can speed up the process by hitting ESC on the keyboard but not always. Also it's usually a 4 or 5 minute process trying to print something on another Vista computer over the network. I don't think the two problems are related, but maybe I'm wrong. Printing to an XP computer over the network is much faster. I'm using Office 2007 Pro Plus on a quad core computer with a good graphics card and 2 gb RAM. Everything else runs fast, even games etc. |
#6
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
Don't know, don't have 2007, I just try to solve the issue.
GoofBoy wrote: It helps in that Word 2007 now runs without pausing every 60 seconds or so to Connect to the Printer, but of course everything else on the machine that worked just fine with the Canon printer now has to have the printer selected. So, the best proposed solution so far: 1) Change Default printer 2) Start/Use Word 3) Close word 4) Change Default printer back 5) Work with every other application on my machine as normal. So, much for multi-tasking. Thank you Microsoft. Again, why does Word 2007 have to poll the default printer? Why can't this be turned off or made to look at the Microsoft Office Document Image Writer without changing the default printer for the entire machine? If it can be, how? "Bob I" wrote: Maybe make the "Microsoft Office Document Image Writer" the default printer? GoofBoy wrote: Same issue here, your suggestion didn't help. Still goes out to try and connect to the printer, I use a laptop and I have a network with a Canon PIXMA iP4000 printer connected to a desktop Vista Machine. I print to this printer when in the office, I tried your suggestion, no luck. Same issue occurs when I am on the road - please don't tell me I have to delete the printer when not in the office - crappy 'solution'. "I also get There is insufficient memory or disk space. Word cannot display the requested font." When opening some client documents after several seconds of not responding. The is over a Gig of free RAM and tons of free disk space, this is a bad/incorrect error message. I am a software developer so we can get as technical as you like. Please tell me how I can disable this constant polling of the default printer - very, very, very annoying and buggy. "Beth Melton" wrote: Make sure your printer driver is installed locally. Open your Printers folder, remove the printer, and add it back using the Add Printer Wizard. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "It's Dan" It's wrote in message ... I get the message "Connecting to Printer" at the bottom of the screen when I try to use drop down menus in Office, try to paste something, or try to do several other 'easy' commands. When this happens Office freezes temporarily and, several minutes later, closes itself or finally performs the task. Sometimes I can speed up the process by hitting ESC on the keyboard but not always. Also it's usually a 4 or 5 minute process trying to print something on another Vista computer over the network. I don't think the two problems are related, but maybe I'm wrong. Printing to an XP computer over the network is much faster. I'm using Office 2007 Pro Plus on a quad core computer with a good graphics card and 2 gb RAM. Everything else runs fast, even games etc. |
#7
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
I have had this problem too, but today I uninstalled the convert to PDF add-in and also the XPS printer. The problem seems to have gone, except for in the first document I open - but even then the delay is much less. Is this of any help to anyone? -- penderra ------------------------------------------------------------------------ penderra's Profile: http://forums.techarena.in/member.php?userid=48652 View this thread: http://forums.techarena.in/showthread.php?t=911392 http://forums.techarena.in |
#8
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
MS Word is text reflow software, not page layout based. It uses the current printer driver to determine the capabilities it offers
to the user and the way it creates page layout and automatic page breaks, the minimum margin settings, graphics print method and font availability and download requirements from the printer currently listed in the Print dialog. If you're not installing a local printer driver (even for a printer that is on the network), then you may want to choose the optional install MS Office Document Image Writer (always local) as the Word default choice. The insufficient memory message can come from several causes, including an overflow of a 64K information table or an environmental variable pointing to a non local or not writable location, or an add-in that interferes. ================== "GoofBoy" wrote in message ... Same issue here, your suggestion didn't help. Still goes out to try and connect to the printer, I use a laptop and I have a network with a Canon PIXMA iP4000 printer connected to a desktop Vista Machine. I print to this printer when in the office, I tried your suggestion, no luck. Same issue occurs when I am on the road - please don't tell me I have to delete the printer when not in the office - crappy 'solution'. "I also get There is insufficient memory or disk space. Word cannot display the requested font." When opening some client documents after several seconds of not responding. The is over a Gig of free RAM and tons of free disk space, this is a bad/incorrect error message. I am a software developer so we can get as technical as you like. Please tell me how I can disable this constant polling of the default printer - very, very, very annoying and buggy. -- Bob Buckland ?:-) MS Office System Products MVP *Courtesy is not expensive and can pay big dividends* |
#9
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
"then you may want to choose the optional install MS Office Document
Image Writer (always local) as the Word default choice" Okay Bob, now you are teasing me. 1) How do I set the default printer for Word 2007 without changing the system default printer? I can't find where to do this. 2) I have tried to add the remote printer as a local printer by adding it manually and using a Local Port (\\Server\PrinterName) and get Access denied, not a helpful error msg, is there a log somewhere that might help with figuring out why. I tried turning off both firewalls - same result - access denied (both Vista Machines) One on a wireless network the other Ethernet right into my wireless router. Print sharing works fine but I can't map the remote Printer to a Local Port. Getting either to work above would be a great help as Word is basically unusable because of the incessant "Connecting to Printer..." without changing the default printer for the entire machine everytime I bring it up. The insufficient memory message can come from several causes, including an overflow of a 64K information table or an environmental variable pointing to a non local or not writable location, or an add-in that interferes. My guess this comes from running in the compatability mode (maybe font, formatting issues) as it only occurs with client documents I open. Word will crash on opening the file and then let me open it when I try again after Word restarts - it may or may not crash again. The only add-in I have installed is Stamps.com to print postage. Thank you sir. "Bob Buckland ?:-)" wrote: MS Word is text reflow software, not page layout based. It uses the current printer driver to determine the capabilities it offers to the user and the way it creates page layout and automatic page breaks, the minimum margin settings, graphics print method and font availability and download requirements from the printer currently listed in the Print dialog. If you're not installing a local printer driver (even for a printer that is on the network), then you may want to choose the optional install MS Office Document Image Writer (always local) as the Word default choice. The insufficient memory message can come from several causes, including an overflow of a 64K information table or an environmental variable pointing to a non local or not writable location, or an add-in that interferes. ================== "GoofBoy" wrote in message ... Same issue here, your suggestion didn't help. Still goes out to try and connect to the printer, I use a laptop and I have a network with a Canon PIXMA iP4000 printer connected to a desktop Vista Machine. I print to this printer when in the office, I tried your suggestion, no luck. Same issue occurs when I am on the road - please don't tell me I have to delete the printer when not in the office - crappy 'solution'. "I also get There is insufficient memory or disk space. Word cannot display the requested font." When opening some client documents after several seconds of not responding. The is over a Gig of free RAM and tons of free disk space, this is a bad/incorrect error message. I am a software developer so we can get as technical as you like. Please tell me how I can disable this constant polling of the default printer - very, very, very annoying and buggy. -- Bob Buckland ?:-) MS Office System Products MVP *Courtesy is not expensive and can pay big dividends* |
#10
|
|||
|
|||
"Connecting to Printer, Press ESC to Cancel" Message- Freezes
Hello Has anyone got a pernament fix in place, other that a work around. Surely this is a big thing and is affecting loads of people, arnt microsoft aware of this? This must be affecting a lot of busineses. Is there not away to remove this annoying feature? -- RusStar ------------------------------------------------------------------------ RusStar's Profile: http://forums.techarena.in/member.php?u=52095 View this thread: http://forums.techarena.in/showthread.php?t=911392 http://forums.techarena.in |
|
Thread Tools | |
Display Modes | |
|
|