If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
AfterFinalRender
I have a parent form and a child form in AC2003. I have searched this forum
and the web and cannot find an example of what I'm trying to do. I need the child form to open only after the parenty form has completely opened. The parent form has some charts on it and it takes some time to open. After the parent form has finished completely, I want to open the child form. That is, once the last chart on the parent form displays I want to open the child form. Based on the few examples I have found, I have the following in the parent form I have: Private Sub Form_Open(Cancel As Integer) Me.Form.AfterFinalRender = "[EventProcedure]" I've also tried: Private Sub Form_Open(Cancel As Integer) form(0).AfterFinalRender = "[EventProcedure]" which doesn't work either. In the AfterFinalRender event in the parent form I have: Private Sub Form_AfterFinalRender(ByVal drawObject As Object) DoCmd.OpenForm "frmbackingupdatabase", acNormal, , , acFormEdit, acWindowNormal, "Updating Outlook Calendar..." End Sub The code in the Form_AfterFinalRender in the parent form never gets called. Can anyone tell me what I'm doing wrong? I would really appreciate it. |
#2
|
|||
|
|||
AfterFinalRender
From the help on msdn, there is some sample code.
Private Sub Form_AfterFinalRender(ByVal drawObject As Object) MsgBox "The PivotChart View has fully rendered." End Sub Here are helpful descriptions: After Final Render occurs after all elements in the specified PivotChart view have been rendered. Syntax: expression.AfterFinalRender(drawObject ) expression A variable that represents a Form object. Parameters: Name Required/Optional Data Type Description drawObject Required Object A ChChartDraw object. Use the methods and properties of this object to draw objects on the chart. Return Value: nothing Example: The following example demonstrates the syntax for a subroutine that traps the AfterFinalRender event. Private Sub Form_AfterFinalRender(ByVal drawObject As Object) MsgBox "The PivotChart View has fully rendered." End Sub 'end of descriptions from msdn---------------- Although I don't have experience with charts, I suggest you try something like: Private Sub Form_AfterFinalRender(ByVal drawObject As Object) Me.NameOfSubformControl.Visible = True End Sub Note: replace drawObject with your chart object, and NameOfSubformControl with the name of the subform control on the main form. The subform and the subform control may have different names. Jeanette Cunningham MS Access MVP -- Melbourne Victoria Australia "PeterM" wrote in message ... I have a parent form and a child form in AC2003. I have searched this forum and the web and cannot find an example of what I'm trying to do. I need the child form to open only after the parenty form has completely opened. The parent form has some charts on it and it takes some time to open. After the parent form has finished completely, I want to open the child form. That is, once the last chart on the parent form displays I want to open the child form. Based on the few examples I have found, I have the following in the parent form I have: Private Sub Form_Open(Cancel As Integer) Me.Form.AfterFinalRender = "[EventProcedure]" I've also tried: Private Sub Form_Open(Cancel As Integer) form(0).AfterFinalRender = "[EventProcedure]" which doesn't work either. In the AfterFinalRender event in the parent form I have: Private Sub Form_AfterFinalRender(ByVal drawObject As Object) DoCmd.OpenForm "frmbackingupdatabase", acNormal, , , acFormEdit, acWindowNormal, "Updating Outlook Calendar..." End Sub The code in the Form_AfterFinalRender in the parent form never gets called. Can anyone tell me what I'm doing wrong? I would really appreciate it. |
#3
|
|||
|
|||
AfterFinalRender
Jeannette...
Thank you for the info. Could you provide the url in the msdn that you found this explanation on? Thanks again! "Jeanette Cunningham" wrote: From the help on msdn, there is some sample code. Private Sub Form_AfterFinalRender(ByVal drawObject As Object) MsgBox "The PivotChart View has fully rendered." End Sub Here are helpful descriptions: After Final Render occurs after all elements in the specified PivotChart view have been rendered. Syntax: expression.AfterFinalRender(drawObject ) expression A variable that represents a Form object. Parameters: Name Required/Optional Data Type Description drawObject Required Object A ChChartDraw object. Use the methods and properties of this object to draw objects on the chart. Return Value: nothing Example: The following example demonstrates the syntax for a subroutine that traps the AfterFinalRender event. Private Sub Form_AfterFinalRender(ByVal drawObject As Object) MsgBox "The PivotChart View has fully rendered." End Sub 'end of descriptions from msdn---------------- Although I don't have experience with charts, I suggest you try something like: Private Sub Form_AfterFinalRender(ByVal drawObject As Object) Me.NameOfSubformControl.Visible = True End Sub Note: replace drawObject with your chart object, and NameOfSubformControl with the name of the subform control on the main form. The subform and the subform control may have different names. Jeanette Cunningham MS Access MVP -- Melbourne Victoria Australia "PeterM" wrote in message ... I have a parent form and a child form in AC2003. I have searched this forum and the web and cannot find an example of what I'm trying to do. I need the child form to open only after the parenty form has completely opened. The parent form has some charts on it and it takes some time to open. After the parent form has finished completely, I want to open the child form. That is, once the last chart on the parent form displays I want to open the child form. Based on the few examples I have found, I have the following in the parent form I have: Private Sub Form_Open(Cancel As Integer) Me.Form.AfterFinalRender = "[EventProcedure]" I've also tried: Private Sub Form_Open(Cancel As Integer) form(0).AfterFinalRender = "[EventProcedure]" which doesn't work either. In the AfterFinalRender event in the parent form I have: Private Sub Form_AfterFinalRender(ByVal drawObject As Object) DoCmd.OpenForm "frmbackingupdatabase", acNormal, , , acFormEdit, acWindowNormal, "Updating Outlook Calendar..." End Sub The code in the Form_AfterFinalRender in the parent form never gets called. Can anyone tell me what I'm doing wrong? I would really appreciate it. . |
#4
|
|||
|
|||
AfterFinalRender
Go to http://msdn.microsoft.com/library and do a search of AfterFinalRender
-- Doug Steele, Microsoft Access MVP http://www.AccessMVP.com/djsteele Co-author: Access 2010 Solutions, published by Wiley (no e-mails, please!) "PeterM" wrote in message ... Jeannette... Thank you for the info. Could you provide the url in the msdn that you found this explanation on? Thanks again! "Jeanette Cunningham" wrote: From the help on msdn, there is some sample code. Private Sub Form_AfterFinalRender(ByVal drawObject As Object) MsgBox "The PivotChart View has fully rendered." End Sub Here are helpful descriptions: After Final Render occurs after all elements in the specified PivotChart view have been rendered. Syntax: expression.AfterFinalRender(drawObject ) expression A variable that represents a Form object. Parameters: Name Required/Optional Data Type Description drawObject Required Object A ChChartDraw object. Use the methods and properties of this object to draw objects on the chart. Return Value: nothing Example: The following example demonstrates the syntax for a subroutine that traps the AfterFinalRender event. Private Sub Form_AfterFinalRender(ByVal drawObject As Object) MsgBox "The PivotChart View has fully rendered." End Sub 'end of descriptions from msdn---------------- Although I don't have experience with charts, I suggest you try something like: Private Sub Form_AfterFinalRender(ByVal drawObject As Object) Me.NameOfSubformControl.Visible = True End Sub Note: replace drawObject with your chart object, and NameOfSubformControl with the name of the subform control on the main form. The subform and the subform control may have different names. Jeanette Cunningham MS Access MVP -- Melbourne Victoria Australia "PeterM" wrote in message ... I have a parent form and a child form in AC2003. I have searched this forum and the web and cannot find an example of what I'm trying to do. I need the child form to open only after the parenty form has completely opened. The parent form has some charts on it and it takes some time to open. After the parent form has finished completely, I want to open the child form. That is, once the last chart on the parent form displays I want to open the child form. Based on the few examples I have found, I have the following in the parent form I have: Private Sub Form_Open(Cancel As Integer) Me.Form.AfterFinalRender = "[EventProcedure]" I've also tried: Private Sub Form_Open(Cancel As Integer) form(0).AfterFinalRender = "[EventProcedure]" which doesn't work either. In the AfterFinalRender event in the parent form I have: Private Sub Form_AfterFinalRender(ByVal drawObject As Object) DoCmd.OpenForm "frmbackingupdatabase", acNormal, , , acFormEdit, acWindowNormal, "Updating Outlook Calendar..." End Sub The code in the Form_AfterFinalRender in the parent form never gets called. Can anyone tell me what I'm doing wrong? I would really appreciate it. . |
Thread Tools | |
Display Modes | |
|
|