If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Save As and changing file names in Word 2000
I've noticed what seems like a different behavior lately trying to
change file names. In writing a string of letters, upon starting a new one I'll do a Save As and change the document name. Sometimes, I then want to go back and change the name of the previous letter. When I do File/Open and then rename the previous document, which is ostensibly closed, I now get the "Cannot Rename: ... Access is denied" error message. That doesn't seem correct, and I don't recall this behavior before the last month or two. Am I forgetting, or has something changed? Any quick way to get around this? Thanks, Gene Goldenfeld |
#2
|
|||
|
|||
Save As and changing file names in Word 2000
When you say "rename" the previous document, just what do you mean. I can
open DocumentA, use FileSaveAs DocumentB so that I now have a document of that name open. Then I can use FileOpen DocumentA to open the original document and I can use FileSaveAs DocumentC so that now there are 3 documents DocumentA DocumentB DocumentC I can also in the FileOpen dialog, change the name of DocumentA to DocumentD and then click open. There are now 3 documents DocumentB DocumentC DocumentD If I try and open DocumentA by selecting it from the list of most recently used files, I get an error because it no longer exists as it is now DocumentD. -- Please post any further questions or followup to the newsgroups for the benefit of others who may be interested. Unsolicited questions forwarded directly to me will only be answered on a paid consulting basis. Hope this helps Doug Robbins - Word MVP "Gene Goldenfeld" wrote in message ... I've noticed what seems like a different behavior lately trying to change file names. In writing a string of letters, upon starting a new one I'll do a Save As and change the document name. Sometimes, I then want to go back and change the name of the previous letter. When I do File/Open and then rename the previous document, which is ostensibly closed, I now get the "Cannot Rename: ... Access is denied" error message. That doesn't seem correct, and I don't recall this behavior before the last month or two. Am I forgetting, or has something changed? Any quick way to get around this? Thanks, Gene Goldenfeld |
#3
|
|||
|
|||
Save As and changing file names in Word 2000
Doug Robbins - Word MVP wrote:
When you say "rename" the previous document, just what do you mean. I can open DocumentA, use FileSaveAs DocumentB so that I now have a document of that name open. Then I can use FileOpen DocumentA to open the original document and I can use FileSaveAs DocumentC so that now there are 3 documents DocumentA DocumentB DocumentC I can also in the FileOpen dialog, change the name of DocumentA to DocumentD and then click open. There are now 3 documents DocumentB DocumentC DocumentD If I try and open DocumentA by selecting it from the list of most recently used files, I get an error because it no longer exists as it is now DocumentD. Doug, I mean after renaming Doc A as Doc B, do File/Open and rename Doc A in the file list by highlighting it and using F2. I can do it with ones that haven't been recently opened, so why not one that was just used and now is effectively closed because it's been renamed? I did this for years in WordPerfect and, unless I've really lost my memory, have been doing it in Word for a few years, as well, at least until just recently. Gene |
#4
|
|||
|
|||
Save As and changing file names in Word 2000
Hi Gene,
Sorry, I cannot replicate that problem. If I set the read only attribute for the file, then when I try to rename it in the File Open dialog, a Confirm File Rename message box appears with the message "Are you sure you want to rename the read-only file 'filename.doc' to 'anotherfilename.doc'? If you click Yes, the file is renamed and opened. -- Please post any further questions or followup to the newsgroups for the benefit of others who may be interested. Unsolicited questions forwarded directly to me will only be answered on a paid consulting basis. Hope this helps Doug Robbins - Word MVP "Gene Goldenfeld" wrote in message ... Doug Robbins - Word MVP wrote: When you say "rename" the previous document, just what do you mean. I can open DocumentA, use FileSaveAs DocumentB so that I now have a document of that name open. Then I can use FileOpen DocumentA to open the original document and I can use FileSaveAs DocumentC so that now there are 3 documents DocumentA DocumentB DocumentC I can also in the FileOpen dialog, change the name of DocumentA to DocumentD and then click open. There are now 3 documents DocumentB DocumentC DocumentD If I try and open DocumentA by selecting it from the list of most recently used files, I get an error because it no longer exists as it is now DocumentD. Doug, I mean after renaming Doc A as Doc B, do File/Open and rename Doc A in the file list by highlighting it and using F2. I can do it with ones that haven't been recently opened, so why not one that was just used and now is effectively closed because it's been renamed? I did this for years in WordPerfect and, unless I've really lost my memory, have been doing it in Word for a few years, as well, at least until just recently. Gene |
#5
|
|||
|
|||
Save As and changing file names in Word 2000
Doug Robbins - Word MVP wrote:
Hi Gene, Sorry, I cannot replicate that problem. If I set the read only attribute for the file, then when I try to rename it in the File Open dialog, a Confirm File Rename message box appears with the message "Are you sure you want to rename the read-only file 'filename.doc' to 'anotherfilename.doc'? If you click Yes, the file is renamed and opened. I'm not setting read-only. Just doing what any of us might do when we realize, getting to the point of naming the second ("saved as") file, that the first could have been better named. I'm not clear if you are unable to replicate what I'm doing or another procedure you've misunderstood it to be. Thanks for your help, Gene |
#6
|
|||
|
|||
Save As and changing file names in Word 2000
Hi Gene,
What I am saying is that I am unable to replicate the problem, even with a document that had its attribute set to Read Only. -- Please post any further questions or followup to the newsgroups for the benefit of others who may be interested. Unsolicited questions forwarded directly to me will only be answered on a paid consulting basis. Hope this helps Doug Robbins - Word MVP "Gene Goldenfeld" wrote in message ... Doug Robbins - Word MVP wrote: Hi Gene, Sorry, I cannot replicate that problem. If I set the read only attribute for the file, then when I try to rename it in the File Open dialog, a Confirm File Rename message box appears with the message "Are you sure you want to rename the read-only file 'filename.doc' to 'anotherfilename.doc'? If you click Yes, the file is renamed and opened. I'm not setting read-only. Just doing what any of us might do when we realize, getting to the point of naming the second ("saved as") file, that the first could have been better named. I'm not clear if you are unable to replicate what I'm doing or another procedure you've misunderstood it to be. Thanks for your help, Gene |
#7
|
|||
|
|||
Save As and changing file names in Word 2000
This is one of the (many) reasons for using templates instead of documents
to create new documents. If you close your new document first, you will be able to rename the old document using the File Open dialog. When you opened the first document, a marker file was created to tell the computer the file was open. When you used Save As to save the file to the new name, the marker file is not changed (although it should be). For more on the different kinds of templates and locations of templates folders see http://addbalance.com/usersguide/templates.htm. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- --------- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "Gene Goldenfeld" wrote in message ... I've noticed what seems like a different behavior lately trying to change file names. In writing a string of letters, upon starting a new one I'll do a Save As and change the document name. Sometimes, I then want to go back and change the name of the previous letter. When I do File/Open and then rename the previous document, which is ostensibly closed, I now get the "Cannot Rename: ... Access is denied" error message. That doesn't seem correct, and I don't recall this behavior before the last month or two. Am I forgetting, or has something changed? Any quick way to get around this? Thanks, Gene Goldenfeld |
#8
|
|||
|
|||
Save As and changing file names in Word 2000
I've run into the problem, using SaveAs on an open document. He is trying to
rename an existing document that was used as the basis for an open document. I haven't tried it in Word 2003, but know that I have seen it. It is a bug, of sorts. It wouldn't be a bug if new documents were created from templates. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- --------- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "Doug Robbins - Word MVP" wrote in message ... Hi Gene, What I am saying is that I am unable to replicate the problem, even with a document that had its attribute set to Read Only. -- Please post any further questions or followup to the newsgroups for the benefit of others who may be interested. Unsolicited questions forwarded directly to me will only be answered on a paid consulting basis. Hope this helps Doug Robbins - Word MVP "Gene Goldenfeld" wrote in message ... Doug Robbins - Word MVP wrote: Hi Gene, Sorry, I cannot replicate that problem. If I set the read only attribute for the file, then when I try to rename it in the File Open dialog, a Confirm File Rename message box appears with the message "Are you sure you want to rename the read-only file 'filename.doc' to 'anotherfilename.doc'? If you click Yes, the file is renamed and opened. I'm not setting read-only. Just doing what any of us might do when we realize, getting to the point of naming the second ("saved as") file, that the first could have been better named. I'm not clear if you are unable to replicate what I'm doing or another procedure you've misunderstood it to be. Thanks for your help, Gene |
#9
|
|||
|
|||
Save As and changing file names in Word 2000
Charles Kenyon wrote:
This is one of the (many) reasons for using templates instead of documents to create new documents. If you close your new document first, you will be able to rename the old document using the File Open dialog. When you opened the first document, a marker file was created to tell the computer the file was open. When you used Save As to save the file to the new name, the marker file is not changed (although it should be). For more on the different kinds of templates and locations of templates folders see http://addbalance.com/usersguide/templates.htm. I'm glad not to be the only one to see the problem and appreciate your explanations. I've never used templates because they haven't seemed necessary. Perhaps that's a leftover from using WordPerfect for years, where there is greater flexibilty on issues like this one. Gene |
#10
|
|||
|
|||
Save As and changing file names in Word 2000
It is much more important to use templates in Word than it is in Word
Perfect. It isn't so much a restriction as an empowerment, although it may not seem like it at first. Templates can hold a lot of stuff and using a template protects your basic structure. For more on the different kinds of templates and locations of templates folders see http://addbalance.com/usersguide/templates.htm. It is also vital that you learn about Styles http://addbalance.com/usersguide/styles.htm and AutoText http://addbalance.com/autotextautocorrect.htm. Once you've mastered templates, styles, and AutoText you won't much miss WP. General Info on moving from Word Perfect to Word: Word and Word Perfect work very differently from one another. Each program's methods have strengths and weaknesses; but, if you try to use one of these programs as if it were the other, it is like pushing on a string! You can easily make a lot of extra work for yourself. If you are unwilling to take the time to learn to use Word's methods, you should stick to using Word Pad. You'll have a lot less grief, although you'll miss out on a lot of raw power. See http://www.addbalance.com/word/wordperfect.htm http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm http://www.mvps.org/word/FAQs/General/RevealCodes.htm http://www.mvps.org/word/FAQs/Genera...Converters.htm http://businesssoft.about.com/comput.../blconvert.htm for information on Word for Word Perfect users. For mo http://www.mvps.org/word/FAQs/Custom...platePart2.htm http://www.mvps.org/word/FAQs/Custom...platePart1.htm http://www.addbalance.com/usersguide/templates.htm http://www.mvps.org/word/FAQs/Number...gExplained.htm http://www.addbalance.com/usersguide/styles.htm http://www.mvps.org/word/FAQs/Custom...latesStore.htm In Word 2000 (or later) You can get the function keys to display in a special toolbar at the bottom of the screen if you want (something like pressing F3 twice in WP). The following macro will do this. Sub ShowMeFunctionKeys() Commandbars("Function Key Display").Visible = True End Sub Word's Extend key (F8) gives something similar to block processing. Learn about Styles - really learn! http://www.addbalance.com/usersguide/styles.htm I resisted for years and now regret every day of those years because although that string was still very hard to push, it kept getting longer and longer, and had some very important projects tied to it! Once you understand styles and the Word concept of organizing things into Chinese boxes everything falls into place and instead of pushing a string, you can push a button that turns on the very powerful text processing machine known as Microsoft Word and it will start doing your work for you instead of running around behind you trying to undo what you just thought you did. Finally, in WP a lot of people use macros to hold chunks of text - boilerplate. In Word this function is filled by Templates, AutoText and AutoCorrect, not macros. Follow the links at http://addbalance.com/word/wordwebre...s.htm#AutoText for more information on these tools. It's a lot of reading, I know. It's OK to chunk it down and do a bit each day, but I would recommend that you make it a top priority to do that bit each day. You can use FILLIN and ASK fields or UserForms to query the user. For some form documents, Word's "online forms" work very well. For more about online forms, follow the links at http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially Dian Chapman's series of articles. As for converting documents from Word Perfect to use in Word... In a word, don't plan on it. I would not recommend using converted documents long-term. They will be filled with formatting anomolies that will get you at the worst time. This is especially true of any documents containing automatic numbering or bullets. Try recreating form documents in Word using the following process: In Word Perfect (if you still have it, in Word if not) save your files as text files. Use your converted files as references to show you how you want your formatting to look. Create a new document in Word and insert the text from the text file. Save this new document as a Word template. Format it the way you want using styles, not direct formatting. Save it again. To use a template within Word, use File = New and pick your template. This will create a new document for you. General practice in WP is to have a document and copy and edit it to create a new document. This is not good practice in Word. In Word, construct a good, tight, template for your documents and use that template when constructing new documents. Among other things, this can avoid embarrassing "metadata" http://www.addbalance.com/usersguide/metadata.htm and things like surprise headers and footers from creeping into new documents. -- Charles Kenyon Word New User FAQ & Web Directory: http://addbalance.com/word Intermediate User's Guide to Microsoft Word (supplemented version of Microsoft's Legal Users' Guide) http://addbalance.com/usersguide See also the MVP FAQ: http://www.mvps.org/word which is awesome! --------- --------- --------- --------- --------- --------- This message is posted to a newsgroup. Please post replies and questions to the newsgroup so that others can learn from my ignorance and your wisdom. "Gene Goldenfeld" wrote in message ... Charles Kenyon wrote: This is one of the (many) reasons for using templates instead of documents to create new documents. If you close your new document first, you will be able to rename the old document using the File Open dialog. When you opened the first document, a marker file was created to tell the computer the file was open. When you used Save As to save the file to the new name, the marker file is not changed (although it should be). For more on the different kinds of templates and locations of templates folders see http://addbalance.com/usersguide/templates.htm. I'm glad not to be the only one to see the problem and appreciate your explanations. I've never used templates because they haven't seemed necessary. Perhaps that's a leftover from using WordPerfect for years, where there is greater flexibilty on issues like this one. Gene |
|
Thread Tools | |
Display Modes | |
|
|