If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Size of Query result
Ok, I see. There are many details to cope with. I have showed the query to
the user, because it is a crosstab query with dynamic number of columns, depending on the result. The output is datasheet. I have earlier made a cumbersome report that does the same thing in an earlier application and thought I would be able to do it a bit easier this time. I would hope that his version should present the data the same way as mine does. But I guess I have to do it with much more labour. Thank you anyway for your responses. / Rolf "Allen Browne" wrote: Sorry, Rolf From my first reply, I have assumed you had a Datasheet form to display the query -- probably because I never let users anywhere near the actualy tables and queries. You were talking about queries. I have not been answering your question at all. Apologies. -- Allen Browne - Microsoft MVP. Perth, Western Australia Tips for Access users - http://allenbrowne.com/tips.html Reply to group, rather than allenbrowne at mvps dot org. "Rolf Rosenquist" wrote in message ... As normal, as the queries are not locked, only forms, reports and code. The user has also a full licensed version of Office, so I am not using the developer version in this case. I must correct one thing I said earlier. I was not using 2002 when writing this application, but 2000 as I should make a mde version of it. I have learned that the 2002 version saves the programs in 2000 style by default and that could not be converted to mde in 2002. - So the program is made in 2000, and I can change and save the query in my 2002 version and it works on my other computer with 2002, but not in his 2003 version. / Rolf |
#12
|
|||
|
|||
Size of Query result
Allen, I have now tested to make a brand new database in his machine, without
any connection at all to my application. Created a table and a normal query. - Still the same issue. He cannot change the size of the result of the query. At least it was not my application that was the problem. I have suggested a reinstallation of Access as a possible way out - but must admit that I doubt for the result. If so could it be the hardware that locks up? / Rolf "Allen Browne" wrote: Sorry, Rolf From my first reply, I have assumed you had a Datasheet form to display the query -- probably because I never let users anywhere near the actualy tables and queries. You were talking about queries. I have not been answering your question at all. Apologies. -- Allen Browne - Microsoft MVP. Perth, Western Australia Tips for Access users - http://allenbrowne.com/tips.html Reply to group, rather than allenbrowne at mvps dot org. "Rolf Rosenquist" wrote in message ... As normal, as the queries are not locked, only forms, reports and code. The user has also a full licensed version of Office, so I am not using the developer version in this case. I must correct one thing I said earlier. I was not using 2002 when writing this application, but 2000 as I should make a mde version of it. I have learned that the 2002 version saves the programs in 2000 style by default and that could not be converted to mde in 2002. - So the program is made in 2000, and I can change and save the query in my 2002 version and it works on my other computer with 2002, but not in his 2003 version. / Rolf |
#13
|
|||
|
|||
Size of Query result
I have had problems with trying to make modifications remotely i.e.
refresh table links. I had to create a procedure attached to a command button on a form that would refresh the links on the remote computer. Click the command button on the form and that refreshed the links. Running the procedure directly in the module remotely appeared to work but did nothing. This may be a similar issue. Rolf Rosenquist wrote: Allen, I have now tested to make a brand new database in his machine, without any connection at all to my application. Created a table and a normal query. - Still the same issue. He cannot change the size of the result of the query. At least it was not my application that was the problem. I have suggested a reinstallation of Access as a possible way out - but must admit that I doubt for the result. If so could it be the hardware that locks up? / Rolf "Allen Browne" wrote: Sorry, Rolf From my first reply, I have assumed you had a Datasheet form to display the query -- probably because I never let users anywhere near the actualy tables and queries. You were talking about queries. I have not been answering your question at all. Apologies. -- Allen Browne - Microsoft MVP. Perth, Western Australia Tips for Access users - http://allenbrowne.com/tips.html Reply to group, rather than allenbrowne at mvps dot org. "Rolf Rosenquist" wrote in message ... As normal, as the queries are not locked, only forms, reports and code. The user has also a full licensed version of Office, so I am not using the developer version in this case. I must correct one thing I said earlier. I was not using 2002 when writing this application, but 2000 as I should make a mde version of it. I have learned that the 2002 version saves the programs in 2000 style by default and that could not be converted to mde in 2002. - So the program is made in 2000, and I can change and save the query in my 2002 version and it works on my other computer with 2002, but not in his 2003 version. / Rolf |
#14
|
|||
|
|||
Size of Query result
Yes, you are right abaout that. I have also many times noticed that the
update of my remote display has not always worked. But as we on those occasions spoke to each other over the telephone, I have heard that it had been updated on the host side. But this problem that the query result cannot be set, is still the same on his computer. I have earlier got annoyed of another thing, and that is that reports tend to open in a smaller size than 100%. Even when I try to save it in 100%. Then I got the tip from an older thread here that if I let the code have the line "DoCmd.RunCommand acCmdZoom100" right after the open report command on the preceeding form, it worked. So I tried to figure out if there is something similiar for the query result, but could not find anything. Maybe there is, or there isn't? / Rolf " wrote: I have had problems with trying to make modifications remotely i.e. refresh table links. I had to create a procedure attached to a command button on a form that would refresh the links on the remote computer. Click the command button on the form and that refreshed the links. Running the procedure directly in the module remotely appeared to work but did nothing. This may be a similar issue. Rolf Rosenquist wrote: Allen, I have now tested to make a brand new database in his machine, without any connection at all to my application. Created a table and a normal query. - Still the same issue. He cannot change the size of the result of the query. At least it was not my application that was the problem. I have suggested a reinstallation of Access as a possible way out - but must admit that I doubt for the result. If so could it be the hardware that locks up? / Rolf "Allen Browne" wrote: Sorry, Rolf From my first reply, I have assumed you had a Datasheet form to display the query -- probably because I never let users anywhere near the actualy tables and queries. You were talking about queries. I have not been answering your question at all. Apologies. -- Allen Browne - Microsoft MVP. Perth, Western Australia Tips for Access users - http://allenbrowne.com/tips.html Reply to group, rather than allenbrowne at mvps dot org. "Rolf Rosenquist" wrote in message ... As normal, as the queries are not locked, only forms, reports and code. The user has also a full licensed version of Office, so I am not using the developer version in this case. I must correct one thing I said earlier. I was not using 2002 when writing this application, but 2000 as I should make a mde version of it. I have learned that the 2002 version saves the programs in 2000 style by default and that could not be converted to mde in 2002. - So the program is made in 2000, and I can change and save the query in my 2002 version and it works on my other computer with 2002, but not in his 2003 version. / Rolf |
|
Thread Tools | |
Display Modes | |
|
|