A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Office » Setup, Installing & Configuration
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

Desktop ICONS disappeared/changed



 
 
Thread Tools Display Modes
  #11  
Old June 8th, 2005, 01:33 AM
John Blaustein
external usenet poster
 
Posts: n/a
Default

JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who specializes
in XP. After fully explaining my problem, and telling the guy that I'd
recently replaced my HDD with a new drive, we concluded that problem is
related to unsuccessfully mirroring the old drive onto the new drive.
Apparently, the MBR does not get copied bit for bit, and XP has a problem
with that and the Registry on the new drive. Furthermore, some hidden XP
files don't get copied correctly, or don't get copied at all, leading to
further problems.

The MS tech was able to walk me through restoring System Restore, but he
explained that other apps may still not work and that "only time will tell."

My next step is a clean install! Ugh. You live and learn. At least no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab, it
freezes and I get an error message about rundll32.exe not running and
DrWatson PostMortem Debugger not running. I send both error reports to
MS.

I got a message back from MS support in response to my "call for help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the support
options available with your Microsoft product. However, I have taken the
time to look through our self help website and found that the rundll32.exe
file is located in the c:\windows\System32 folder. RunDLL32 is used to
run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt important.
A week ago, I got a new HDD and used the Western Digital utility to
transfer my C: drive to the new HD. I've done this in the past with no
problem. I am thinking my current problem may be related.

I have run ScanDisk and the Western Digital error checking utility and no
problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him at work
often. He said just reboot and everything will be fine. He said it's
always the same icons that go first too. Something about something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that I say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home SP2. All
XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today from the
Office icons to the "standard DOS-style icon" -- little white rectangle
with blue bar at the top. When I right click one of these icons and
select Properties, the "Change Icon" button is grayed out.

Not only did all the Word and Excel icons disappear (change to the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard DOS-style
icon. Also, StartAll ProgramsMicrosoft Office Tools -- all icons are
gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with that
icon.

I am able to restore the icon by finding the .EXE file for each program
and right-dragging it to the desktop (or Start Menu folder) and
selecting create shortcut here.

Can someone tell me what's going on here? This is very strange behavior
and only just happened.

Thank you.

John








  #12  
Old June 8th, 2005, 01:58 AM
JoAnn Paules [MSFT MVP]
external usenet poster
 
Posts: n/a
Default

I know a clean install can be a pain in the arse but I've never heard anyone
say they had a problem after a fresh start that would have been avoided if
they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers crossed that
goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling the guy
that I'd recently replaced my HDD with a new drive, we concluded that
problem is related to unsuccessfully mirroring the old drive onto the new
drive. Apparently, the MBR does not get copied bit for bit, and XP has a
problem with that and the Registry on the new drive. Furthermore, some
hidden XP files don't get copied correctly, or don't get copied at all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore, but he
explained that other apps may still not work and that "only time will
tell."

My next step is a clean install! Ugh. You live and learn. At least no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab, it
freezes and I get an error message about rundll32.exe not running and
DrWatson PostMortem Debugger not running. I send both error reports to
MS.

I got a message back from MS support in response to my "call for help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the support
options available with your Microsoft product. However, I have taken the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder. RunDLL32
is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western Digital
utility to transfer my C: drive to the new HD. I've done this in the
past with no problem. I am thinking my current problem may be related.

I have run ScanDisk and the Western Digital error checking utility and no
problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him at
work often. He said just reboot and everything will be fine. He said
it's always the same icons that go first too. Something about something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that I say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today from
the Office icons to the "standard DOS-style icon" -- little white
rectangle with blue bar at the top. When I right click one of these
icons and select Properties, the "Change Icon" button is grayed out.

Not only did all the Word and Excel icons disappear (change to the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office Tools -- all
icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with that
icon.

I am able to restore the icon by finding the .EXE file for each program
and right-dragging it to the desktop (or Start Menu folder) and
selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John










  #13  
Old June 8th, 2005, 02:34 AM
John Blaustein
external usenet poster
 
Posts: n/a
Default

The plot thickens...

I thought to look on the Western Digital support site and found a KB article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS walked me
through. This does not, however, address the problem of my changing icons
(which is happening again for Roxio programs only), or my inability to use
Office Update. I have posted a question for Western Digital support and
will see what they say. In the meantime, I may reinstall the Roxio program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the final
outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never heard
anyone say they had a problem after a fresh start that would have been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling the
guy that I'd recently replaced my HDD with a new drive, we concluded that
problem is related to unsuccessfully mirroring the old drive onto the new
drive. Apparently, the MBR does not get copied bit for bit, and XP has a
problem with that and the Registry on the new drive. Furthermore, some
hidden XP files don't get copied correctly, or don't get copied at all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore, but he
explained that other apps may still not work and that "only time will
tell."

My next step is a clean install! Ugh. You live and learn. At least no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab, it
freezes and I get an error message about rundll32.exe not running and
DrWatson PostMortem Debugger not running. I send both error reports to
MS.

I got a message back from MS support in response to my "call for help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the support
options available with your Microsoft product. However, I have taken the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western Digital
utility to transfer my C: drive to the new HD. I've done this in the
past with no problem. I am thinking my current problem may be related.

I have run ScanDisk and the Western Digital error checking utility and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him at
work often. He said just reboot and everything will be fine. He said
it's always the same icons that go first too. Something about something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that I say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today from
the Office icons to the "standard DOS-style icon" -- little white
rectangle with blue bar at the top. When I right click one of these
icons and select Properties, the "Change Icon" button is grayed out.

Not only did all the Word and Excel icons disappear (change to the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John













  #14  
Old June 8th, 2005, 02:44 AM
JoAnn Paules [MSFT MVP]
external usenet poster
 
Posts: n/a
Default

Make this your mantra - "I love computers." Repeat it 50 or 60 times a day.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
The plot thickens...

I thought to look on the Western Digital support site and found a KB
article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS walked
me
through. This does not, however, address the problem of my changing icons
(which is happening again for Roxio programs only), or my inability to use
Office Update. I have posted a question for Western Digital support and
will see what they say. In the meantime, I may reinstall the Roxio
program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the final
outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never heard
anyone say they had a problem after a fresh start that would have been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling the
guy that I'd recently replaced my HDD with a new drive, we concluded
that
problem is related to unsuccessfully mirroring the old drive onto the
new
drive. Apparently, the MBR does not get copied bit for bit, and XP has a
problem with that and the Registry on the new drive. Furthermore, some
hidden XP files don't get copied correctly, or don't get copied at all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore, but he
explained that other apps may still not work and that "only time will
tell."

My next step is a clean install! Ugh. You live and learn. At least no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab, it
freezes and I get an error message about rundll32.exe not running and
DrWatson PostMortem Debugger not running. I send both error reports to
MS.

I got a message back from MS support in response to my "call for help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the support
options available with your Microsoft product. However, I have taken
the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western Digital
utility to transfer my C: drive to the new HD. I've done this in the
past with no problem. I am thinking my current problem may be related.

I have run ScanDisk and the Western Digital error checking utility and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him at
work often. He said just reboot and everything will be fine. He said
it's always the same icons that go first too. Something about
something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that I
say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today from
the Office icons to the "standard DOS-style icon" -- little white
rectangle with blue bar at the top. When I right click one of these
icons and select Properties, the "Change Icon" button is grayed out.

Not only did all the Word and Excel icons disappear (change to the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John















  #15  
Old June 8th, 2005, 03:18 AM
John Blaustein
external usenet poster
 
Posts: n/a
Default

I tried to uninstall or repair MS Office. Can't do. I get an error saying
installer files are missing. Back to square one = clean install. Ugh.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Make this your mantra - "I love computers." Repeat it 50 or 60 times a
day.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
The plot thickens...

I thought to look on the Western Digital support site and found a KB
article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS walked
me
through. This does not, however, address the problem of my changing
icons
(which is happening again for Roxio programs only), or my inability to
use
Office Update. I have posted a question for Western Digital support and
will see what they say. In the meantime, I may reinstall the Roxio
program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the final
outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never heard
anyone say they had a problem after a fresh start that would have been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling the
guy that I'd recently replaced my HDD with a new drive, we concluded
that
problem is related to unsuccessfully mirroring the old drive onto the
new
drive. Apparently, the MBR does not get copied bit for bit, and XP has
a
problem with that and the Registry on the new drive. Furthermore, some
hidden XP files don't get copied correctly, or don't get copied at all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore, but
he
explained that other apps may still not work and that "only time will
tell."

My next step is a clean install! Ugh. You live and learn. At least
no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab, it
freezes and I get an error message about rundll32.exe not running and
DrWatson PostMortem Debugger not running. I send both error reports
to
MS.

I got a message back from MS support in response to my "call for
help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the
support
options available with your Microsoft product. However, I have taken
the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking
the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western Digital
utility to transfer my C: drive to the new HD. I've done this in the
past with no problem. I am thinking my current problem may be
related.

I have run ScanDisk and the Western Digital error checking utility and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him at
work often. He said just reboot and everything will be fine. He said
it's always the same icons that go first too. Something about
something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that I
say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today from
the Office icons to the "standard DOS-style icon" -- little white
rectangle with blue bar at the top. When I right click one of these
icons and select Properties, the "Change Icon" button is grayed out.

Not only did all the Word and Excel icons disappear (change to the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with
that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John

















  #16  
Old June 8th, 2005, 03:21 AM
JoAnn Paules [MSFT MVP]
external usenet poster
 
Posts: n/a
Default

Well, you did say you had everything backed up. That's a very good thing. (I
know it's tough to be positive right now but you have backups and that's
more than a lot of people have when they need to start from square one. All
you've lost is a little time.)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
I tried to uninstall or repair MS Office. Can't do. I get an error saying
installer files are missing. Back to square one = clean install. Ugh.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Make this your mantra - "I love computers." Repeat it 50 or 60 times a
day.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
The plot thickens...

I thought to look on the Western Digital support site and found a KB
article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS walked
me
through. This does not, however, address the problem of my changing
icons
(which is happening again for Roxio programs only), or my inability to
use
Office Update. I have posted a question for Western Digital support and
will see what they say. In the meantime, I may reinstall the Roxio
program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the
final outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never heard
anyone say they had a problem after a fresh start that would have been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling the
guy that I'd recently replaced my HDD with a new drive, we concluded
that
problem is related to unsuccessfully mirroring the old drive onto the
new
drive. Apparently, the MBR does not get copied bit for bit, and XP has
a
problem with that and the Registry on the new drive. Furthermore,
some
hidden XP files don't get copied correctly, or don't get copied at
all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore, but
he
explained that other apps may still not work and that "only time will
tell."

My next step is a clean install! Ugh. You live and learn. At least
no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab, it
freezes and I get an error message about rundll32.exe not running and
DrWatson PostMortem Debugger not running. I send both error reports
to
MS.

I got a message back from MS support in response to my "call for
help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the
support
options available with your Microsoft product. However, I have taken
the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking
the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western Digital
utility to transfer my C: drive to the new HD. I've done this in the
past with no problem. I am thinking my current problem may be
related.

I have run ScanDisk and the Western Digital error checking utility
and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him at
work often. He said just reboot and everything will be fine. He said
it's always the same icons that go first too. Something about
something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that I
say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today
from
the Office icons to the "standard DOS-style icon" -- little white
rectangle with blue bar at the top. When I right click one of
these
icons and select Properties, the "Change Icon" button is grayed
out.

Not only did all the Word and Excel icons disappear (change to the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with
that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John



















  #17  
Old June 8th, 2005, 03:38 AM
John Blaustein
external usenet poster
 
Posts: n/a
Default

JoAnn,

You are right. It's just about time, but the last time I did this, it took
a good solid day to get back to square one, so it's not insignificant.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Well, you did say you had everything backed up. That's a very good thing.
(I know it's tough to be positive right now but you have backups and
that's more than a lot of people have when they need to start from square
one. All you've lost is a little time.)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
I tried to uninstall or repair MS Office. Can't do. I get an error
saying installer files are missing. Back to square one = clean install.
Ugh.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Make this your mantra - "I love computers." Repeat it 50 or 60 times a
day.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
The plot thickens...

I thought to look on the Western Digital support site and found a KB
article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS
walked me
through. This does not, however, address the problem of my changing
icons
(which is happening again for Roxio programs only), or my inability to
use
Office Update. I have posted a question for Western Digital support
and
will see what they say. In the meantime, I may reinstall the Roxio
program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the
final outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never heard
anyone say they had a problem after a fresh start that would have been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers
crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling
the
guy that I'd recently replaced my HDD with a new drive, we concluded
that
problem is related to unsuccessfully mirroring the old drive onto the
new
drive. Apparently, the MBR does not get copied bit for bit, and XP
has a
problem with that and the Registry on the new drive. Furthermore,
some
hidden XP files don't get copied correctly, or don't get copied at
all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore, but
he
explained that other apps may still not work and that "only time will
tell."

My next step is a clean install! Ugh. You live and learn. At least
no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab,
it
freezes and I get an error message about rundll32.exe not running
and
DrWatson PostMortem Debugger not running. I send both error reports
to
MS.

I got a message back from MS support in response to my "call for
help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the
support
options available with your Microsoft product. However, I have taken
the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking
the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western Digital
utility to transfer my C: drive to the new HD. I've done this in
the
past with no problem. I am thinking my current problem may be
related.

I have run ScanDisk and the Western Digital error checking utility
and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him
at
work often. He said just reboot and everything will be fine. He
said
it's always the same icons that go first too. Something about
something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that I
say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home
SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today
from
the Office icons to the "standard DOS-style icon" -- little white
rectangle with blue bar at the top. When I right click one of
these
icons and select Properties, the "Change Icon" button is grayed
out.

Not only did all the Word and Excel icons disappear (change to the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office
Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with
that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu
folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John





















  #18  
Old June 8th, 2005, 03:52 AM
JoAnn Paules [MSFT MVP]
external usenet poster
 
Posts: n/a
Default

I worked for a company that supposed backed up the network drive nightly. I
had been having some minor computer issues and had copied my files over to
my part of the network for several days. (I was doing CAD work at the time,
printed circuit board design specifically.) I tidied up my system and moved
files back to my hard drive. It was Friday the 13th a little after 1 p.m.
(about 13:13 military time) and everything went SEE YA! Gone - as in
everything was wiped out. No OS, nothing.

Our IT guy said it wasn't a virus but there was too much timing coincidence
for me ever to believe him. I thought I was safe - files had been on the
network over night and everything was backed up, right? Wrong. The main part
of the network was backed up. Our personal share of it was backed up *if*
there was space. Apparently because the guys had used the network space for
games, there was nothing left over. (This was before we were hooked into the
Internet and before MP3's, etc.)

I lost months worth of work. I was able to salvage some but most was gone
for good. You're only out a day at the most - and have lost no work. You're
fortunate. Really.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn,

You are right. It's just about time, but the last time I did this, it
took a good solid day to get back to square one, so it's not
insignificant.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Well, you did say you had everything backed up. That's a very good thing.
(I know it's tough to be positive right now but you have backups and
that's more than a lot of people have when they need to start from square
one. All you've lost is a little time.)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
I tried to uninstall or repair MS Office. Can't do. I get an error
saying installer files are missing. Back to square one = clean install.
Ugh.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Make this your mantra - "I love computers." Repeat it 50 or 60 times a
day.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
The plot thickens...

I thought to look on the Western Digital support site and found a KB
article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS
walked me
through. This does not, however, address the problem of my changing
icons
(which is happening again for Roxio programs only), or my inability to
use
Office Update. I have posted a question for Western Digital support
and
will see what they say. In the meantime, I may reinstall the Roxio
program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the
final outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never heard
anyone say they had a problem after a fresh start that would have been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers
crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling
the
guy that I'd recently replaced my HDD with a new drive, we concluded
that
problem is related to unsuccessfully mirroring the old drive onto
the new
drive. Apparently, the MBR does not get copied bit for bit, and XP
has a
problem with that and the Registry on the new drive. Furthermore,
some
hidden XP files don't get copied correctly, or don't get copied at
all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore,
but he
explained that other apps may still not work and that "only time
will
tell."

My next step is a clean install! Ugh. You live and learn. At
least no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was
right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab,
it
freezes and I get an error message about rundll32.exe not running
and
DrWatson PostMortem Debugger not running. I send both error
reports to
MS.

I got a message back from MS support in response to my "call for
help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the
support
options available with your Microsoft product. However, I have
taken the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists -- clicking
the
System Restore tab still causes a "crash" -- the rundll32.exe error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western Digital
utility to transfer my C: drive to the new HD. I've done this in
the
past with no problem. I am thinking my current problem may be
related.

I have run ScanDisk and the Western Digital error checking utility
and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
John -

I was talking to my husband about this. He said it happens to him
at
work often. He said just reboot and everything will be fine. He
said
it's always the same icons that go first too. Something about
something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that
I say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home
SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today
from
the Office icons to the "standard DOS-style icon" -- little white
rectangle with blue bar at the top. When I right click one of
these
icons and select Properties, the "Change Icon" button is grayed
out.

Not only did all the Word and Excel icons disappear (change to
the
DOS-style icon), but the StartAll Programs icons for "New Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office
Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with
that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu
folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John























  #19  
Old June 8th, 2005, 05:10 AM
John Blaustein
external usenet poster
 
Posts: n/a
Default

Your point is well taken. I am not complaining. In addition, of course, my
system will run very smoothly (at first anyway) with a fresh install.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I worked for a company that supposed backed up the network drive nightly. I
had been having some minor computer issues and had copied my files over to
my part of the network for several days. (I was doing CAD work at the time,
printed circuit board design specifically.) I tidied up my system and moved
files back to my hard drive. It was Friday the 13th a little after 1 p.m.
(about 13:13 military time) and everything went SEE YA! Gone - as in
everything was wiped out. No OS, nothing.

Our IT guy said it wasn't a virus but there was too much timing
coincidence for me ever to believe him. I thought I was safe - files had
been on the network over night and everything was backed up, right? Wrong.
The main part of the network was backed up. Our personal share of it was
backed up *if* there was space. Apparently because the guys had used the
network space for games, there was nothing left over. (This was before we
were hooked into the Internet and before MP3's, etc.)

I lost months worth of work. I was able to salvage some but most was gone
for good. You're only out a day at the most - and have lost no work.
You're fortunate. Really.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn,

You are right. It's just about time, but the last time I did this, it
took a good solid day to get back to square one, so it's not
insignificant.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Well, you did say you had everything backed up. That's a very good
thing. (I know it's tough to be positive right now but you have backups
and that's more than a lot of people have when they need to start from
square one. All you've lost is a little time.)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
I tried to uninstall or repair MS Office. Can't do. I get an error
saying installer files are missing. Back to square one = clean install.
Ugh.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Make this your mantra - "I love computers." Repeat it 50 or 60 times a
day.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
The plot thickens...

I thought to look on the Western Digital support site and found a KB
article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS
walked me
through. This does not, however, address the problem of my changing
icons
(which is happening again for Roxio programs only), or my inability
to use
Office Update. I have posted a question for Western Digital support
and
will see what they say. In the meantime, I may reinstall the Roxio
program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the
final outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never heard
anyone say they had a problem after a fresh start that would have
been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers
crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling
the
guy that I'd recently replaced my HDD with a new drive, we
concluded that
problem is related to unsuccessfully mirroring the old drive onto
the new
drive. Apparently, the MBR does not get copied bit for bit, and XP
has a
problem with that and the Registry on the new drive. Furthermore,
some
hidden XP files don't get copied correctly, or don't get copied at
all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore,
but he
explained that other apps may still not work and that "only time
will
tell."

My next step is a clean install! Ugh. You live and learn. At
least no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was
right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore tab,
it
freezes and I get an error message about rundll32.exe not running
and
DrWatson PostMortem Debugger not running. I send both error
reports to
MS.

I got a message back from MS support in response to my "call for
help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the
support
options available with your Microsoft product. However, I have
taken the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists --
clicking the
System Restore tab still causes a "crash" -- the rundll32.exe
error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western
Digital
utility to transfer my C: drive to the new HD. I've done this in
the
past with no problem. I am thinking my current problem may be
related.

I have run ScanDisk and the Western Digital error checking utility
and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in
message
...
John -

I was talking to my husband about this. He said it happens to him
at
work often. He said just reboot and everything will be fine. He
said
it's always the same icons that go first too. Something about
something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him that
I say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home
SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today
from
the Office icons to the "standard DOS-style icon" -- little
white
rectangle with blue bar at the top. When I right click one of
these
icons and select Properties, the "Change Icon" button is grayed
out.

Not only did all the Word and Excel icons disappear (change to
the
DOS-style icon), but the StartAll Programs icons for "New
Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office
Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened with
that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu
folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John

























  #20  
Old June 8th, 2005, 06:30 AM
JoAnn Paules [MSFT MVP]
external usenet poster
 
Posts: n/a
Default

You gotta love the first week or so. Everything is nice and tidy. Almost
like having maid service at home. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Your point is well taken. I am not complaining. In addition, of course,
my system will run very smoothly (at first anyway) with a fresh install.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I worked for a company that supposed backed up the network drive nightly.
I had been having some minor computer issues and had copied my files over
to my part of the network for several days. (I was doing CAD work at the
time, printed circuit board design specifically.) I tidied up my system
and moved files back to my hard drive. It was Friday the 13th a little
after 1 p.m. (about 13:13 military time) and everything went SEE YA!
Gone - as in everything was wiped out. No OS, nothing.

Our IT guy said it wasn't a virus but there was too much timing
coincidence for me ever to believe him. I thought I was safe - files had
been on the network over night and everything was backed up, right?
Wrong. The main part of the network was backed up. Our personal share of
it was backed up *if* there was space. Apparently because the guys had
used the network space for games, there was nothing left over. (This was
before we were hooked into the Internet and before MP3's, etc.)

I lost months worth of work. I was able to salvage some but most was gone
for good. You're only out a day at the most - and have lost no work.
You're fortunate. Really.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn,

You are right. It's just about time, but the last time I did this, it
took a good solid day to get back to square one, so it's not
insignificant.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Well, you did say you had everything backed up. That's a very good
thing. (I know it's tough to be positive right now but you have backups
and that's more than a lot of people have when they need to start from
square one. All you've lost is a little time.)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
I tried to uninstall or repair MS Office. Can't do. I get an error
saying installer files are missing. Back to square one = clean
install. Ugh.

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
Make this your mantra - "I love computers." Repeat it 50 or 60 times
a day.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
The plot thickens...

I thought to look on the Western Digital support site and found a KB
article
that addressed the exact System Restore problem I encountered:

http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1

That's KB #1231 on wdc.com in case the link doesn't work.

The WDC solution to restore System Restore is the same as what MS
walked me
through. This does not, however, address the problem of my changing
icons
(which is happening again for Roxio programs only), or my inability
to use
Office Update. I have posted a question for Western Digital support
and
will see what they say. In the meantime, I may reinstall the Roxio
program
and Office (Word and Excel).

For now, I'm holding off on a clean install, though that may be the
final outcome.

Ya gotta love these machines!

John



"JoAnn Paules [MSFT MVP]" wrote in message
...
I know a clean install can be a pain in the arse but I've never
heard
anyone say they had a problem after a fresh start that would have
been
avoided if they'd (fill in the blank).

I'm sorry you're having these problems and I'll keep my fingers
crossed
that goes well.

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
JoAnn and others who might be interested,

I spoke on the phone this afternoon with a MS Support person who
specializes in XP. After fully explaining my problem, and telling
the
guy that I'd recently replaced my HDD with a new drive, we
concluded that
problem is related to unsuccessfully mirroring the old drive onto
the new
drive. Apparently, the MBR does not get copied bit for bit, and XP
has a
problem with that and the Registry on the new drive. Furthermore,
some
hidden XP files don't get copied correctly, or don't get copied at
all,
leading to further problems.

The MS tech was able to walk me through restoring System Restore,
but he
explained that other apps may still not work and that "only time
will
tell."

My next step is a clean install! Ugh. You live and learn. At
least no
data has been lost.

John



"John Blaustein" wrote in message
...
JoAnn,

For whatever reason, all my icons are back. Your husband was
right.

Yes, everything is backed up.

The plot thickens, however.

When I open System Properties and click on the System Restore
tab, it
freezes and I get an error message about rundll32.exe not running
and
DrWatson PostMortem Debugger not running. I send both error
reports to
MS.

I got a message back from MS support in response to my "call for
help."
The suggestion was as follows:

As a Customer Service Representative, I can assist you with the
support
options available with your Microsoft product. However, I have
taken the
time to look through our self help website and found that the
rundll32.exe file is located in the c:\windows\System32 folder.
RunDLL32 is used to run DLL
s as programs. The following steps may resolve your issue:

1. Search for the file in c:\windows\servicepackfile\i386 folder.
2. Copy to c:\windows\system32 folder.
3. Restart your computer.

I followed these instructions, but the problem persists --
clicking the
System Restore tab still causes a "crash" -- the rundll32.exe
error
message.

I am really baffled by this whole thing.

Since last posting here, I remembered one key thing -- no doubt
important. A week ago, I got a new HDD and used the Western
Digital
utility to transfer my C: drive to the new HD. I've done this in
the
past with no problem. I am thinking my current problem may be
related.

I have run ScanDisk and the Western Digital error checking
utility and
no problems are reported.

JoAnn... perhaps your husband will have some ideas. All idea are
welcome.

John



"JoAnn Paules [MSFT MVP]" wrote in
message
...
John -

I was talking to my husband about this. He said it happens to
him at
work often. He said just reboot and everything will be fine. He
said
it's always the same icons that go first too. Something about
something
stepping on the part of the RAM where this info is stored.

I've learned that he's usually right. And yes, I've told him
that I say
that. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"John Blaustein" wrote in message
...
Hi...

I'm using Office 2000 -- Word and Excel only. Windows XP Home
SP2.
All XP and Office updates applied.

For some reason, all the icons for Word and Excel changed today
from
the Office icons to the "standard DOS-style icon" -- little
white
rectangle with blue bar at the top. When I right click one of
these
icons and select Properties, the "Change Icon" button is grayed
out.

Not only did all the Word and Excel icons disappear (change to
the
DOS-style icon), but the StartAll Programs icons for "New
Office
Document," and "Open Office Document" changed to that standard
DOS-style icon. Also, StartAll ProgramsMicrosoft Office
Tools --
all icons are gone, replaced by the generic icon.

I am also using FrontPage 2003, and the same thing happened
with that
icon.

I am able to restore the icon by finding the .EXE file for each
program and right-dragging it to the desktop (or Start Menu
folder)
and selecting create shortcut here.

Can someone tell me what's going on here? This is very strange
behavior and only just happened.

Thank you.

John



























 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Desktop ICONS disappeared/changed John Blaustein General Discussions 26 June 13th, 2005 08:56 PM
Copying Desktop Icons to another computer Joseph Meehan General Discussion 2 February 16th, 2005 11:02 PM
'Office' icons on desktop don't work after SP2 installed. why? Tony_tony837 General Discussions 0 February 1st, 2005 12:09 AM
Desktop icons suddenly changed to MS-DOS style Rob General Discussions 1 September 8th, 2004 11:47 PM
Desktop filling up with FrontPage e icons, yellow folders, bps files Mary Hootie New Users 2 May 16th, 2004 01:26 PM


All times are GMT +1. The time now is 10:47 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 OfficeFrustration.
The comments are property of their posters.