A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Word » Tables
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

Table Header Row doesn't repeat



 
 
Thread Tools Display Modes
  #1  
Old September 8th, 2007, 07:12 AM posted to microsoft.public.word.tables
Sue D
external usenet poster
 
Posts: 5
Default Table Header Row doesn't repeat

I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on any
page. I cannot find a manual page break in the table. I have run a repair
of the software. This table is 16 pages long so a header row is desired.
  #2  
Old September 13th, 2007, 10:44 AM posted to microsoft.public.word.tables
Doug Robbins - Word MVP
external usenet poster
 
Posts: 8,239
Default Table Header Row doesn't repeat

The following has previously been posted when that problem has come up:

Make sure the table is not wrapped and has no breaks and that you don't have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on any
page. I cannot find a manual page break in the table. I have run a
repair
of the software. This table is 16 pages long so a header row is desired.



  #3  
Old September 13th, 2007, 03:50 PM posted to microsoft.public.word.tables
Sue D
external usenet poster
 
Posts: 5
Default Table Header Row doesn't repeat

I revealed hidden formatting codes and looked through three times for section
or page breaks and did not see any. Table Properties shows only row 1 as the
header row. I'm not sure what you mean by not wrapped. If you mean the
table is wider than the paper, I changed Table Properties to set the table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:

The following has previously been posted when that problem has come up:

Make sure the table is not wrapped and has no breaks and that you don't have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on any
page. I cannot find a manual page break in the table. I have run a
repair
of the software. This table is 16 pages long so a header row is desired.




  #4  
Old September 13th, 2007, 09:17 PM
Henk57 Henk57 is offline
Senior Member
 
First recorded activity by OfficeFrustration: Oct 2006
Posts: 387
Send a message via Skype™ to Henk57
Default

Sue, try unchecking "Heading rows repeat", reselect yr table header, and check "Heading rows repeat" again. I don't know why but sometimes it mriaculously solves the problem.
HTH - Henk

Quote:
Originally Posted by Sue D View Post
I revealed hidden formatting codes and looked through three times for section
or page breaks and did not see any. Table Properties shows only row 1 as the
header row. I'm not sure what you mean by not wrapped. If you mean the
table is wider than the paper, I changed Table Properties to set the table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:

The following has previously been posted when that problem has come up:

Make sure the table is not wrapped and has no breaks and that you don't have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on any
page. I cannot find a manual page break in the table. I have run a
repair
of the software. This table is 16 pages long so a header row is desired.



  #5  
Old September 13th, 2007, 10:46 PM posted to microsoft.public.word.tables
Sue D
external usenet poster
 
Posts: 5
Default Table Header Row doesn't repeat

Thanks, but I've tried that. I've removed the heading rows. I've tried
making more rows the repeated rows. Nothing changed. I'm sure it's
something simple, but it beats me what it is. They worked when I originally
created the table. I didn't notice when they disappeared to know what I may
have done to make it happen.

"Henk57" wrote:


Sue, try unchecking "Heading rows repeat", reselect yr table header, and
check "Heading rows repeat" again. I don't know why but sometimes it
mriaculously solves the problem.
HTH - Henk

Sue D;2366086 Wrote:
I revealed hidden formatting codes and looked through three times for
section
or page breaks and did not see any. Table Properties shows only row 1
as the
header row. I'm not sure what you mean by not wrapped. If you mean
the
table is wider than the paper, I changed Table Properties to set the
table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:
-
The following has previously been posted when that problem has come
up:

Make sure the table is not wrapped and has no breaks and that you
don't have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...-
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on
any
page. I cannot find a manual page break in the table. I have run a

repair
of the software. This table is 16 pages long so a header row is
desired. -


-





--
Henk57

  #6  
Old September 14th, 2007, 06:57 AM posted to microsoft.public.word.tables
Doug Robbins - Word MVP
external usenet poster
 
Posts: 8,239
Default Table Header Row doesn't repeat

On the Table tab of the Table Properties dialog, make sure that Text
wrapping is set to None in the bottom half of the dialog.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I revealed hidden formatting codes and looked through three times for
section
or page breaks and did not see any. Table Properties shows only row 1 as
the
header row. I'm not sure what you mean by not wrapped. If you mean the
table is wider than the paper, I changed Table Properties to set the table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:

The following has previously been posted when that problem has come up:

Make sure the table is not wrapped and has no breaks and that you don't
have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on
any
page. I cannot find a manual page break in the table. I have run a
repair
of the software. This table is 16 pages long so a header row is
desired.






  #7  
Old September 15th, 2007, 01:26 AM posted to microsoft.public.word.tables
Sue D
external usenet poster
 
Posts: 5
Default Table Header Row doesn't repeat

That was the problem!! I selected None and my headings appeared. Thank you.

"Doug Robbins - Word MVP" wrote:

On the Table tab of the Table Properties dialog, make sure that Text
wrapping is set to None in the bottom half of the dialog.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I revealed hidden formatting codes and looked through three times for
section
or page breaks and did not see any. Table Properties shows only row 1 as
the
header row. I'm not sure what you mean by not wrapped. If you mean the
table is wider than the paper, I changed Table Properties to set the table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:

The following has previously been posted when that problem has come up:

Make sure the table is not wrapped and has no breaks and that you don't
have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on
any
page. I cannot find a manual page break in the table. I have run a
repair
of the software. This table is 16 pages long so a header row is
desired.






  #8  
Old February 4th, 2009, 07:02 PM posted to microsoft.public.word.tables
easbrown
external usenet poster
 
Posts: 3
Default Table Header Row doesn't repeat

I have tried all these things and still doesn't work. Using Word 2002.

"Sue D" wrote:

That was the problem!! I selected None and my headings appeared. Thank you.

"Doug Robbins - Word MVP" wrote:

On the Table tab of the Table Properties dialog, make sure that Text
wrapping is set to None in the bottom half of the dialog.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I revealed hidden formatting codes and looked through three times for
section
or page breaks and did not see any. Table Properties shows only row 1 as
the
header row. I'm not sure what you mean by not wrapped. If you mean the
table is wider than the paper, I changed Table Properties to set the table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:

The following has previously been posted when that problem has come up:

Make sure the table is not wrapped and has no breaks and that you don't
have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on
any
page. I cannot find a manual page break in the table. I have run a
repair
of the software. This table is 16 pages long so a header row is
desired.






  #9  
Old February 4th, 2009, 08:54 PM posted to microsoft.public.word.tables
Doug Robbins - Word MVP
external usenet poster
 
Posts: 8,239
Default Table Header Row doesn't repeat

Send me the document and I will take a look at it for you.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"easbrown" wrote in message
...
I have tried all these things and still doesn't work. Using Word 2002.

"Sue D" wrote:

That was the problem!! I selected None and my headings appeared. Thank
you.

"Doug Robbins - Word MVP" wrote:

On the Table tab of the Table Properties dialog, make sure that Text
wrapping is set to None in the bottom half of the dialog.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I revealed hidden formatting codes and looked through three times for
section
or page breaks and did not see any. Table Properties shows only row
1 as
the
header row. I'm not sure what you mean by not wrapped. If you mean
the
table is wider than the paper, I changed Table Properties to set the
table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:

The following has previously been posted when that problem has come
up:

Make sure the table is not wrapped and has no breaks and that you
don't
have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...
I have a table with row 1 defined as a repeating header row.
Table
Properties confirms the setting. However, the row does not repeat
on
any
page. I cannot find a manual page break in the table. I have run
a
repair
of the software. This table is 16 pages long so a header row is
desired.








  #10  
Old February 17th, 2010, 01:59 PM posted to microsoft.public.word.tables
John Little
external usenet poster
 
Posts: 1
Default Repeat table headers

Just to say how useful this posting was and this site is - just started using Mac Office and hit this very problem with the same solution and outcome



Sue wrote:

That was the problem!!
14-Sep-07

That was the problem!! I selected None and my headings appeared. Thank you.

"Doug Robbins - Word MVP" wrote:

Previous Posts In This Thread:

On Saturday, September 08, 2007 2:12 AM
Sue wrote:

Table Header Row doesn't repeat
I have a table with row 1 defined as a repeating header row. Table
Properties confirms the setting. However, the row does not repeat on any
page. I cannot find a manual page break in the table. I have run a repair
of the software. This table is 16 pages long so a header row is desired.

On Thursday, September 13, 2007 5:44 AM
Doug Robbins - Word MVP wrote:

Table Header Row doesn't repeat
The following has previously been posted when that problem has come up:

Make sure the table is not wrapped and has no breaks and that you don't have
all the rows set as heading rows.


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...

On Thursday, September 13, 2007 10:50 AM
Sue wrote:

I revealed hidden formatting codes and looked through three times for section
I revealed hidden formatting codes and looked through three times for section
or page breaks and did not see any. Table Properties shows only row 1 as the
header row. I'm not sure what you mean by not wrapped. If you mean the
table is wider than the paper, I changed Table Properties to set the table
width at 100% and still have the problem.

"Doug Robbins - Word MVP" wrote:

On Thursday, September 13, 2007 4:17 PM
Henk57 wrote:

Sue, try unchecking "Heading rows repeat", reselect yr table header, andcheck
Sue, try unchecking "Heading rows repeat", reselect yr table header, and
check "Heading rows repeat" again. I don't know why but sometimes it
mriaculously solves the problem.
HTH - Henk

Sue D;2366086 Wrote:




--
Henk57

On Thursday, September 13, 2007 5:46 PM
Sue wrote:

Thanks, but I've tried that. I've removed the heading rows.
Thanks, but I've tried that. I've removed the heading rows. I've tried
making more rows the repeated rows. Nothing changed. I'm sure it's
something simple, but it beats me what it is. They worked when I originally
created the table. I didn't notice when they disappeared to know what I may
have done to make it happen.

"Henk57" wrote:

On Friday, September 14, 2007 1:57 AM
Doug Robbins - Word MVP wrote:

On the Table tab of the Table Properties dialog, make sure that Text wrapping
On the Table tab of the Table Properties dialog, make sure that Text
wrapping is set to None in the bottom half of the dialog.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Sue D" wrote in message
...

On Friday, September 14, 2007 8:26 PM
Sue wrote:

That was the problem!!
That was the problem!! I selected None and my headings appeared. Thank you.

"Doug Robbins - Word MVP" wrote:

On Wednesday, February 04, 2009 1:02 PM
easbrow wrote:

I have tried all these things and still doesn't work. Using Word 2002.
I have tried all these things and still does not work. Using Word 2002.

"Sue D" wrote:

On Wednesday, February 04, 2009 2:54 PM
Doug Robbins - Word MVP wrote:

Send me the document and I will take a look at it for you.-- Hope this helps.
Send me the document and I will take a look at it for you.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"easbrown" wrote in message
...


Submitted via EggHeadCafe - Software Developer Portal of Choice
Putting Twitter Realtime Search to Work
http://www.eggheadcafe.com/tutorials...-realtime.aspx
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:05 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 OfficeFrustration.
The comments are property of their posters.