A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Word » Page Layout
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

Header Way Too Large! Table Problem.



 
 
Thread Tools Display Modes
  #1  
Old June 29th, 2007, 04:03 PM posted to microsoft.public.word.pagelayout
Todd Walton
external usenet poster
 
Posts: 7
Default Header Way Too Large! Table Problem.

I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

Ads
  #2  
Old June 30th, 2007, 02:43 PM posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Header Way Too Large! Table Problem.

I've never had this problem caused by a table (and I have 84-page document
consisting entirely of a 3,603-row table), but if your table has only a
single row, that could be an issue. If that's the case, it wouldn't be
necessary to actually split the table, just divide the content into more
rows.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
oups.com...
I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton


  #3  
Old July 3rd, 2007, 09:28 PM posted to microsoft.public.word.pagelayout
Todd Walton
external usenet poster
 
Posts: 7
Default Header Way Too Large! Table Problem.

On Jun 30, 8:43 am, "Suzanne S. Barnhill" wrote:
I've never had this problem caused by a table (and I have 84-page document
consisting entirely of a 3,603-row table), but if your table has only a
single row, that could be an issue. If that's the case, it wouldn't be
necessary to actually split the table, just divide the content into more
rows.


For what it's worth, I was unable to replicate the problem. It's only
in this one document.

-todd

  #4  
Old July 3rd, 2007, 11:09 PM posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Header Way Too Large! Table Problem.

If the problem occurs in a single document, then the document is likely
corrupt. If you have a version that permits it, click the arrow beside Open
and choose Open and Repair. If you don't have that option, then see
http://word.mvps.org/FAQs/AppErrors/CorruptDoc.htm for other repair
techniques.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
ups.com...
On Jun 30, 8:43 am, "Suzanne S. Barnhill" wrote:
I've never had this problem caused by a table (and I have 84-page

document
consisting entirely of a 3,603-row table), but if your table has only a
single row, that could be an issue. If that's the case, it wouldn't be
necessary to actually split the table, just divide the content into more
rows.


For what it's worth, I was unable to replicate the problem. It's only
in this one document.

-todd


  #5  
Old April 16th, 2010, 02:49 PM posted to microsoft.public.word.pagelayout
Betty McDonagh
external usenet poster
 
Posts: 2
Default Header way too large. Table Problem

FYI....I just came across this same problem in a document that was sent to me for editing. After a few hours of messing with it, I found that if you go to Table Properties, and under the TABLE tab, select Text Wrapping-None, the header goes back to the top of the page. Better late than never!! Thanks



Todd Walton wrote:

Header Way Too Large! Table Problem.
29-Jun-07

I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

Previous Posts In This Thread:

On Friday, June 29, 2007 11:03 AM
Todd Walton wrote:

Header Way Too Large! Table Problem.
I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

On Saturday, June 30, 2007 9:43 AM
Suzanne S. Barnhill wrote:

I've never had this problem caused by a table (and I have 84-page
I've never had this problem caused by a table (and I have 84-page document
consisting entirely of a 3,603-row table), but if your table has only a
single row, that could be an issue. If that's the case, it wouldn't be
necessary to actually split the table, just divide the content into more
rows.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
oups.com...

On Tuesday, July 03, 2007 4:28 PM
Todd Walton wrote:

Header Way Too Large! Table Problem.
For what it is worth, I was unable to replicate the problem. it is only
in this one document.

-todd

On Tuesday, July 03, 2007 6:09 PM
Suzanne S. Barnhill wrote:

If the problem occurs in a single document, then the document is likelycorrupt.
If the problem occurs in a single document, then the document is likely
corrupt. If you have a version that permits it, click the arrow beside Open
and choose Open and Repair. If you don't have that option, then see
http://word.mvps.org/FAQs/AppErrors/CorruptDoc.htm for other repair
techniques.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
ups.com...
document


Submitted via EggHeadCafe - Software Developer Portal of Choice
WPF Reflection Effect
http://www.eggheadcafe.com/tutorials...on-effect.aspx
  #6  
Old April 16th, 2010, 03:55 PM posted to microsoft.public.word.pagelayout
Stefan Blom[_3_]
external usenet poster
 
Posts: 4,556
Default Header way too large. Table Problem

Indeed, there are side-effects when a wrapped table continues across a page break. Note that in some versions wrapped tables are limited to a single page (if you let the table expand, it will disappear into the bottom edge of the page).

--
Stefan Blom
Microsoft Word MVP



Betty McDonagh wrote in message om...
FYI....I just came across this same problem in a document that was sent to me for editing. After a few hours of messing with it, I found that if you go to Table Properties, and under the TABLE tab, select Text Wrapping-None, the header goes back to the top of the page. Better late than never!! Thanks



Todd Walton wrote:

Header Way Too Large! Table Problem.
29-Jun-07

I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

Previous Posts In This Thread:

On Friday, June 29, 2007 11:03 AM
Todd Walton wrote:

Header Way Too Large! Table Problem.
I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

On Saturday, June 30, 2007 9:43 AM
Suzanne S. Barnhill wrote:

I've never had this problem caused by a table (and I have 84-page
I've never had this problem caused by a table (and I have 84-page document
consisting entirely of a 3,603-row table), but if your table has only a
single row, that could be an issue. If that's the case, it wouldn't be
necessary to actually split the table, just divide the content into more
rows.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
oups.com...

On Tuesday, July 03, 2007 4:28 PM
Todd Walton wrote:

Header Way Too Large! Table Problem.
For what it is worth, I was unable to replicate the problem. it is only
in this one document.

-todd

On Tuesday, July 03, 2007 6:09 PM
Suzanne S. Barnhill wrote:

If the problem occurs in a single document, then the document is likelycorrupt.
If the problem occurs in a single document, then the document is likely
corrupt. If you have a version that permits it, click the arrow beside Open
and choose Open and Repair. If you don't have that option, then see
http://word.mvps.org/FAQs/AppErrors/CorruptDoc.htm for other repair
techniques.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
ups.com...
document


Submitted via EggHeadCafe - Software Developer Portal of Choice
WPF Reflection Effect
http://www.eggheadcafe.com/tutorials...on-effect.aspx



  #7  
Old April 19th, 2010, 07:21 PM posted to microsoft.public.word.pagelayout
Betty McDonagh
external usenet poster
 
Posts: 2
Default Table Way Too Large! Table Problem

FYI...I recently came across this problem also,and after a few hours of messing with it, found that if I went to Table properties under the TABLE tab and selected None under Text wrapping, the header returned to the top of the page. Better late than never! Thanks



Todd Walton wrote:

Header Way Too Large! Table Problem.
29-Jun-07

I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

Previous Posts In This Thread:

On Friday, June 29, 2007 11:03 AM
Todd Walton wrote:

Header Way Too Large! Table Problem.
I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

On Saturday, June 30, 2007 9:43 AM
Suzanne S. Barnhill wrote:

I've never had this problem caused by a table (and I have 84-page
I've never had this problem caused by a table (and I have 84-page document
consisting entirely of a 3,603-row table), but if your table has only a
single row, that could be an issue. If that's the case, it wouldn't be
necessary to actually split the table, just divide the content into more
rows.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
oups.com...

On Tuesday, July 03, 2007 4:28 PM
Todd Walton wrote:

Header Way Too Large! Table Problem.
For what it is worth, I was unable to replicate the problem. it is only
in this one document.

-todd

On Tuesday, July 03, 2007 6:09 PM
Suzanne S. Barnhill wrote:

If the problem occurs in a single document, then the document is likelycorrupt.
If the problem occurs in a single document, then the document is likely
corrupt. If you have a version that permits it, click the arrow beside Open
and choose Open and Repair. If you don't have that option, then see
http://word.mvps.org/FAQs/AppErrors/CorruptDoc.htm for other repair
techniques.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Todd Walton" wrote in message
ups.com...
document

On Friday, April 16, 2010 9:49 AM
Betty McDonagh wrote:

Header way too large. Table Problem
FYI....I just came across this same problem in a document that was sent to me for editing. After a few hours of messing with it, I found that if you go to Table Properties, and under the TABLE tab, select Text Wrapping-None, the header goes back to the top of the page. Better late than never!! Thanks

On Friday, April 16, 2010 10:55 AM
Stefan Blom wrote:

Indeed, there are side-effects when a wrapped table continues across a page
Indeed, there are side-effects when a wrapped table continues across a page break. Note that in some versions wrapped tables are limited to a single page (if you let the table expand, it will disappear into the bottom edge of the page).

--
Stefan Blom
Microsoft Word MVP


Submitted via EggHeadCafe - Software Developer Portal of Choice
Using VSTO Add-In To Automate Frequent Excel 2007 Tasks
http://www.eggheadcafe.com/tutorials...n-to-auto.aspx
  #8  
Old April 19th, 2010, 08:07 PM posted to microsoft.public.word.pagelayout
Stefan Blom[_3_]
external usenet poster
 
Posts: 4,556
Default Table Way Too Large! Table Problem

Note that you have already posted a similar reply in the "Header way too large. Table Problem" thread, also in this newsgroup.

--
Stefan Blom
Microsoft Word MVP



Betty McDonagh wrote in message
news:[email protected] com...
FYI...I recently came across this problem also,and after a few hours of
messing with it, found that if I went to Table properties under the TABLE
tab and selected None under Text wrapping, the header returned to the top
of the page. Better late than never! Thanks



Todd Walton wrote:

Header Way Too Large! Table Problem.
29-Jun-07

I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

Previous Posts In This Thread:

On Friday, June 29, 2007 11:03 AM
Todd Walton wrote:

Header Way Too Large! Table Problem.
I have had an interesting problem with headers and tables in a Word
2003 document. This is the problem, and a workaround fix.

In a ~100 page document, there's a long section of table. I want to
put headers into this document and so I View - Headers and Footers.
When I do this I see that the header is taking up 3/4 of the page!
The header is way too big, and extends down all the way to the
footer. After much wrangling and teeth-gnashing I figured out that it
was the table.

The table is one long continuous thing extending over multiple pages.
I guess the header doesn't see it as content if it's just continued
from the previous page, and so the header goes all the way down. When
I put my cursor on the last row of the table on any given page, and
then select Table - Split Table, the header rights itself on the next
page.

This is far from ideal. Now when I add information to the split up
tables on any given page it spills over to the next page and I'm stuck
with reformatting all over again. And splitting the table on the
first page messes up my column headings with overlaid text. (I
haven't yet investigated why.) It would be nice if Word were
intelligent enough to handle headers in a multi-page continuous table.

But I figured I'd post this bit of information. Everything I found
online (including in this forum) suggested checking that vertical
alignment, in page setup of the header, was set to top and not
center. That wasn't relevant to my problem. Check your tables!

--
Todd Walton

On Saturday, June 30, 2007 9:43 AM
Suzanne S. Barnhill wrote:

I've never had this problem caused by a table (and I have 84-page
I've never had this problem caused by a table (and I have 84-page document
consisting entirely of a 3,603-row table), but if your table has only a
single row, that could be an issue. If that's the case, it wouldn't be
necessary to actually split the table, just divide the content into more
rows.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Todd Walton" wrote in message
oups.com...

On Tuesday, July 03, 2007 4:28 PM
Todd Walton wrote:

Header Way Too Large! Table Problem.
For what it is worth, I was unable to replicate the problem. it is only
in this one document.

-todd

On Tuesday, July 03, 2007 6:09 PM
Suzanne S. Barnhill wrote:

If the problem occurs in a single document, then the document is
likelycorrupt.
If the problem occurs in a single document, then the document is likely
corrupt. If you have a version that permits it, click the arrow beside
Open
and choose Open and Repair. If you don't have that option, then see
http://word.mvps.org/FAQs/AppErrors/CorruptDoc.htm for other repair
techniques.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Todd Walton" wrote in message
ups.com...
document

On Friday, April 16, 2010 9:49 AM
Betty McDonagh wrote:

Header way too large. Table Problem
FYI....I just came across this same problem in a document that was sent to
me for editing. After a few hours of messing with it, I found that if you
go to Table Properties, and under the TABLE tab, select Text
Wrapping-None, the header goes back to the top of the page. Better late
than never!! Thanks

On Friday, April 16, 2010 10:55 AM
Stefan Blom wrote:

Indeed, there are side-effects when a wrapped table continues across a
page
Indeed, there are side-effects when a wrapped table continues across a
page break. Note that in some versions wrapped tables are limited to a
single page (if you let the table expand, it will disappear into the
bottom edge of the page).

--
Stefan Blom
Microsoft Word MVP


Submitted via EggHeadCafe - Software Developer Portal of Choice
Using VSTO Add-In To Automate Frequent Excel 2007 Tasks
http://www.eggheadcafe.com/tutorials...n-to-auto.aspx




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 OfficeFrustration.
The comments are property of their posters.