A Microsoft Office (Excel, Word) forum. OfficeFrustration

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » OfficeFrustration forum » Microsoft Word » New Users
Site Map Home Register Authors List Search Today's Posts Mark Forums Read  

Renumbering footnotes



 
 
Thread Tools Display Modes
  #1  
Old April 8th, 2010, 12:00 AM posted to microsoft.public.word.newusers
Joshua Kreitzer
external usenet poster
 
Posts: 4
Default Renumbering footnotes

I'm using Microsoft Word 2002 and I have a document in which I would
like footnotes to be numbered consecutively: 1, 2, 3, 4, etc. However,
the footnotes contain stretches of numbers that are decimals (for
example, footnote 3 might be followed by footnote 3.1, 3.2, 3.3, etc.)
and other sequences that are just plain out of order. Is there any
kind of macro or other method that can be used to automatically
renumber the footnotes starting with 1 and continuing in whole numbers
until the end of the document?

Thanks for any advice you can provide.

--
Joshua Kreitzer

  #2  
Old April 8th, 2010, 12:23 AM posted to microsoft.public.word.newusers
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Renumbering footnotes

If these are bona fide "footnotes" created using the Insert | Reference |
Footnote function in Word, it would have been very difficult in the first
place to have numbers such as 3.1, 3.2, etc. (they'd have to be done
manually), and they would still update automatically (though if you're
tracking changes you won't see the right numbers till you accept the
changes). You may need to cut the footnote content, delete the footnote,
reinsert it, and paste the content.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Joshua Kreitzer" wrote in message
...
I'm using Microsoft Word 2002 and I have a document in which I would
like footnotes to be numbered consecutively: 1, 2, 3, 4, etc. However,
the footnotes contain stretches of numbers that are decimals (for
example, footnote 3 might be followed by footnote 3.1, 3.2, 3.3, etc.)
and other sequences that are just plain out of order. Is there any
kind of macro or other method that can be used to automatically
renumber the footnotes starting with 1 and continuing in whole numbers
until the end of the document?

Thanks for any advice you can provide.

--
Joshua Kreitzer



  #3  
Old April 8th, 2010, 02:16 AM posted to microsoft.public.word.newusers
Joshua Kreitzer
external usenet poster
 
Posts: 4
Default Renumbering footnotes

The decimal-numbered footnotes were inserted using the Insert/
Reference/Footnote function in Word and numbered manually, and yes, it
was a fair amount of work to do them that way. Also, I am tracking
changes.

Cutting the footnote content, deleting the footnote, reinserting it,
and pasting the content will work, but it would be very time-
consuming. That's why I'm looking for an easier way.

Joshua Kreitzer


On Apr 7, 6:23*pm, "Suzanne S. Barnhill" wrote:
If these are bona fide "footnotes" created using the Insert | Reference |
Footnote function in Word, it would have been very difficult in the first
place to have numbers such as 3.1, 3.2, etc. (they'd have to be done
manually), and they would still update automatically (though if you're
tracking changes you won't see the right numbers till you accept the
changes). You may need to cut the footnote content, delete the footnote,
reinsert it, and paste the content.

"Joshua Kreitzer" wrote in message

...

I'm using Microsoft Word 2002 and I have a document in which I would
like footnotes to be numbered consecutively: 1, 2, 3, 4, etc. However,
the footnotes contain stretches of numbers that are decimals (for
example, footnote 3 might be followed by footnote 3.1, 3.2, 3.3, etc.)
and other sequences that are just plain out of order. Is there any
kind of macro or other method that can be used to automatically
renumber the footnotes starting with 1 and continuing in whole numbers
until the end of the document?


Thanks for any advice you can provide.



  #4  
Old April 8th, 2010, 02:32 AM posted to microsoft.public.word.newusers
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Renumbering footnotes

It actually isn't that time-consuming when you get into a rhythm, but it's
possible you can get the existing numbers to update by selecting 1, 2, 3
numbering in the Footnote and Endnote dialog and specifying it is for "Whole
document."

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Joshua Kreitzer" wrote in message
...
The decimal-numbered footnotes were inserted using the Insert/
Reference/Footnote function in Word and numbered manually, and yes, it
was a fair amount of work to do them that way. Also, I am tracking
changes.

Cutting the footnote content, deleting the footnote, reinserting it,
and pasting the content will work, but it would be very time-
consuming. That's why I'm looking for an easier way.

Joshua Kreitzer


On Apr 7, 6:23 pm, "Suzanne S. Barnhill" wrote:
If these are bona fide "footnotes" created using the Insert | Reference |
Footnote function in Word, it would have been very difficult in the first
place to have numbers such as 3.1, 3.2, etc. (they'd have to be done
manually), and they would still update automatically (though if you're
tracking changes you won't see the right numbers till you accept the
changes). You may need to cut the footnote content, delete the footnote,
reinsert it, and paste the content.

"Joshua Kreitzer" wrote in message

...

I'm using Microsoft Word 2002 and I have a document in which I would
like footnotes to be numbered consecutively: 1, 2, 3, 4, etc. However,
the footnotes contain stretches of numbers that are decimals (for
example, footnote 3 might be followed by footnote 3.1, 3.2, 3.3, etc.)
and other sequences that are just plain out of order. Is there any
kind of macro or other method that can be used to automatically
renumber the footnotes starting with 1 and continuing in whole numbers
until the end of the document?


Thanks for any advice you can provide.




  #5  
Old April 8th, 2010, 03:08 AM posted to microsoft.public.word.newusers
macropod[_2_]
external usenet poster
 
Posts: 2,402
Default Renumbering footnotes

Hi Joshua,

So how did the author get footnotes 3.1, 3.2, etc into to footnote area? By creating new paragraphs for footnote 3 and manually
numbering them? If so, it seems you're after a macro to:
.. go through the footnotes, finding paragraphs beginning with 3.1, 3.2, etc;
.. cut any such paragraphs from the existing footnotes;
.. find the corresponding entry in the body of the document;
.. find & replace the corresponding entry in the body of the document with a genuine footnote;
.. paste the cut text into the new footnote, deleting the old 'manual' footnote number.

Do-able, but you'd need to have many such footnotes to process to make the coding effort worthwhile. For an idea of what's involved,
see my post on a somewhat-related issue at:
http://www.techsupportforum.com/micr...footnotes.html

--
Cheers
macropod
[Microsoft MVP - Word]


"Joshua Kreitzer" wrote in message ...
The decimal-numbered footnotes were inserted using the Insert/
Reference/Footnote function in Word and numbered manually, and yes, it
was a fair amount of work to do them that way. Also, I am tracking
changes.

Cutting the footnote content, deleting the footnote, reinserting it,
and pasting the content will work, but it would be very time-
consuming. That's why I'm looking for an easier way.

Joshua Kreitzer


On Apr 7, 6:23 pm, "Suzanne S. Barnhill" wrote:
If these are bona fide "footnotes" created using the Insert | Reference |
Footnote function in Word, it would have been very difficult in the first
place to have numbers such as 3.1, 3.2, etc. (they'd have to be done
manually), and they would still update automatically (though if you're
tracking changes you won't see the right numbers till you accept the
changes). You may need to cut the footnote content, delete the footnote,
reinsert it, and paste the content.

"Joshua Kreitzer" wrote in message

...

I'm using Microsoft Word 2002 and I have a document in which I would
like footnotes to be numbered consecutively: 1, 2, 3, 4, etc. However,
the footnotes contain stretches of numbers that are decimals (for
example, footnote 3 might be followed by footnote 3.1, 3.2, 3.3, etc.)
and other sequences that are just plain out of order. Is there any
kind of macro or other method that can be used to automatically
renumber the footnotes starting with 1 and continuing in whole numbers
until the end of the document?


Thanks for any advice you can provide.



  #6  
Old April 8th, 2010, 04:51 AM posted to microsoft.public.word.newusers
Joshua Kreitzer
external usenet poster
 
Posts: 4
Default Renumbering footnotes

For the record, the way these footnotes got into the footnote area was
that for each decimal-numbered footnote, the "Insert-Reference-
Footnote" function was used, the appropriate decimal number was typed
into the "Custom mark" box, and "Insert" was clicked.

The reason the footnotes were numbered this way is that this is the
manuscript of a book which has gone through several revisions. In each
revision, some more text was added, which required the addition of
decimal-numbered footnotes between the existing footnotes to avoid
having to renumber all the later notes. However, at this time it is
desired to clean up the numbering and just have whole-numbered
footnotes.

Each chapter is a separate document and the footnotes start over with
1 at the start of each chapter, so at least I don't have to be
concerned with continuous numbering from chapter to chapter.

Joshua Kreitzer


On Apr 7, 9:08*pm, "macropod" wrote:
Hi Joshua,

So how did the author get footnotes 3.1, 3.2, etc into to footnote area? By creating new paragraphs for footnote 3 and manually
numbering them? If so, it seems you're after a macro to:
. go through the footnotes, finding paragraphs beginning with 3.1, 3.2, etc;
. cut any such paragraphs from the existing footnotes;
. find the corresponding entry in the body of the document;
. find & replace the corresponding entry in the body of the document with a genuine footnote;
. paste the cut text into the new footnote, deleting the old 'manual' footnote number.

Do-able, but you'd need to have many such footnotes to process to make the coding effort worthwhile. For an idea of what's involved,
see my post on a somewhat-related issue at:
http://www.techsupportforum.com/micr...soft-office-su...

--
Cheers
macropod
[Microsoft MVP - Word]

"Joshua Kreitzer" wrote in ...

The decimal-numbered footnotes were inserted using the Insert/
Reference/Footnote function in Word and numbered manually, and yes, it
was a fair amount of work to do them that way. Also, I am tracking
changes.

Cutting the footnote content, deleting the footnote, reinserting it,
and pasting the content will work, but it would be very time-
consuming. That's why I'm looking for an easier way.

On Apr 7, 6:23 pm, "Suzanne S. Barnhill" wrote:

If these are bona fide "footnotes" created using the Insert | Reference |
Footnote function in Word, it would have been very difficult in the first
place to have numbers such as 3.1, 3.2, etc. (they'd have to be done
manually), and they would still update automatically (though if you're
tracking changes you won't see the right numbers till you accept the
changes). You may need to cut the footnote content, delete the footnote,
reinsert it, and paste the content.


"Joshua Kreitzer" wrote in message


...


I'm using Microsoft Word 2002 and I have a document in which I would
like footnotes to be numbered consecutively: 1, 2, 3, 4, etc. However,
the footnotes contain stretches of numbers that are decimals (for
example, footnote 3 might be followed by footnote 3.1, 3.2, 3.3, etc.)
and other sequences that are just plain out of order. Is there any
kind of macro or other method that can be used to automatically
renumber the footnotes starting with 1 and continuing in whole numbers
until the end of the document?


Thanks for any advice you can provide.


  #7  
Old April 8th, 2010, 05:06 AM posted to microsoft.public.word.newusers
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Renumbering footnotes

Since the later footnotes would have renumbered themselves automatically
when you inserted new ones, I don't think "avoid having to renumber all the
later notes" is a very good rationale; now if you wanted to keep the
footnote numbers the same to avoid confusion, I can understand that
argument.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Joshua Kreitzer" wrote in message
...
For the record, the way these footnotes got into the footnote area was
that for each decimal-numbered footnote, the "Insert-Reference-
Footnote" function was used, the appropriate decimal number was typed
into the "Custom mark" box, and "Insert" was clicked.

The reason the footnotes were numbered this way is that this is the
manuscript of a book which has gone through several revisions. In each
revision, some more text was added, which required the addition of
decimal-numbered footnotes between the existing footnotes to avoid
having to renumber all the later notes. However, at this time it is
desired to clean up the numbering and just have whole-numbered
footnotes.

Each chapter is a separate document and the footnotes start over with
1 at the start of each chapter, so at least I don't have to be
concerned with continuous numbering from chapter to chapter.

Joshua Kreitzer


On Apr 7, 9:08 pm, "macropod" wrote:
Hi Joshua,

So how did the author get footnotes 3.1, 3.2, etc into to footnote area?
By creating new paragraphs for footnote 3 and manually
numbering them? If so, it seems you're after a macro to:
. go through the footnotes, finding paragraphs beginning with 3.1, 3.2,
etc;
. cut any such paragraphs from the existing footnotes;
. find the corresponding entry in the body of the document;
. find & replace the corresponding entry in the body of the document with
a genuine footnote;
. paste the cut text into the new footnote, deleting the old 'manual'
footnote number.

Do-able, but you'd need to have many such footnotes to process to make the
coding effort worthwhile. For an idea of what's involved,
see my post on a somewhat-related issue
at:
http://www.techsupportforum.com/micr...soft-office-su...

--
Cheers
macropod
[Microsoft MVP - Word]

"Joshua Kreitzer" wrote in
...

The decimal-numbered footnotes were inserted using the Insert/
Reference/Footnote function in Word and numbered manually, and yes, it
was a fair amount of work to do them that way. Also, I am tracking
changes.

Cutting the footnote content, deleting the footnote, reinserting it,
and pasting the content will work, but it would be very time-
consuming. That's why I'm looking for an easier way.

On Apr 7, 6:23 pm, "Suzanne S. Barnhill" wrote:

If these are bona fide "footnotes" created using the Insert | Reference
|
Footnote function in Word, it would have been very difficult in the
first
place to have numbers such as 3.1, 3.2, etc. (they'd have to be done
manually), and they would still update automatically (though if you're
tracking changes you won't see the right numbers till you accept the
changes). You may need to cut the footnote content, delete the footnote,
reinsert it, and paste the content.


"Joshua Kreitzer" wrote in message


...


I'm using Microsoft Word 2002 and I have a document in which I would
like footnotes to be numbered consecutively: 1, 2, 3, 4, etc. However,
the footnotes contain stretches of numbers that are decimals (for
example, footnote 3 might be followed by footnote 3.1, 3.2, 3.3, etc.)
and other sequences that are just plain out of order. Is there any
kind of macro or other method that can be used to automatically
renumber the footnotes starting with 1 and continuing in whole numbers
until the end of the document?


Thanks for any advice you can provide.



  #8  
Old April 8th, 2010, 06:16 AM posted to microsoft.public.word.newusers
Joshua Kreitzer
external usenet poster
 
Posts: 4
Default Renumbering footnotes

This was for a book with looseleaf updates. In prior revisions, the
goal had been to change only those pages that needed to be changed due
to new content.

It's true that new footnotes could have been inserted with automatic
renumbering. However, that would have effectively required the
looseleaf update to have every succeeding page in the chapter
reprinted in order to take account the changes in footnote numbering.
By inserting decimal-numbered footnotes, the content that wasn't being
changed in a given update would not need to be reprinted for that
update.

Now, however, a completely revised edition is being prepared and so
the footnotes are to be cleaned up to use consecutive whole numbers.

Joshua Kreitzer



On Apr 7, 11:06*pm, "Suzanne S. Barnhill" wrote:
Since the later footnotes would have renumbered themselves automatically
when you inserted new ones, I don't think "avoid having to renumber all the
later notes" is a very good rationale; now if you wanted to keep the
footnote numbers the same to avoid confusion, I can understand that
argument.

"Joshua Kreitzer" wrote in message

...

The reason the footnotes were numbered this way is that this is the
manuscript of a book which has gone through several revisions. In each
revision, some more text was added, which required the addition of
decimal-numbered footnotes between the existing footnotes to avoid
having to renumber all the later notes. However, at this time it is
desired to clean up the numbering and just have whole-numbered
footnotes.

  #9  
Old April 8th, 2010, 03:58 PM posted to microsoft.public.word.newusers
Suzanne S. Barnhill
external usenet poster
 
Posts: 31,786
Default Renumbering footnotes

Fair enough, though there's a link to a cautionary tale wrt insert pages at
http://word.mvps.org/FAQs/Numbering/ChapterNumber.htm

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Joshua Kreitzer" wrote in message
...
This was for a book with looseleaf updates. In prior revisions, the
goal had been to change only those pages that needed to be changed due
to new content.

It's true that new footnotes could have been inserted with automatic
renumbering. However, that would have effectively required the
looseleaf update to have every succeeding page in the chapter
reprinted in order to take account the changes in footnote numbering.
By inserting decimal-numbered footnotes, the content that wasn't being
changed in a given update would not need to be reprinted for that
update.

Now, however, a completely revised edition is being prepared and so
the footnotes are to be cleaned up to use consecutive whole numbers.

Joshua Kreitzer



On Apr 7, 11:06 pm, "Suzanne S. Barnhill" wrote:
Since the later footnotes would have renumbered themselves automatically
when you inserted new ones, I don't think "avoid having to renumber all
the
later notes" is a very good rationale; now if you wanted to keep the
footnote numbers the same to avoid confusion, I can understand that
argument.

"Joshua Kreitzer" wrote in message

...

The reason the footnotes were numbered this way is that this is the
manuscript of a book which has gone through several revisions. In each
revision, some more text was added, which required the addition of
decimal-numbered footnotes between the existing footnotes to avoid
having to renumber all the later notes. However, at this time it is
desired to clean up the numbering and just have whole-numbered
footnotes.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 11:35 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 OfficeFrustration.
The comments are property of their posters.