Here's the structure, mistakes and all:

tblKeys 1:M tblMasterKeys
KeyID PK (Autonumber)
KeyName
MstrKeyID (FK, number long integer to tblMasterKeys)

tblMasterKeys
MstrKeyID PK (Autonumber)
MstrKeyName

tblKeysEmployees M:M tblEmployees
KeyID (1/2 PK, FK to tblKeys, number, l.i.)
EmpID (1/2 PK, FK to tblEmployees, #, l.i.)
AllowedtoRetain Yes/No
Approvedby
DateIssued Date/Time
DateLost Date/Time
DateRtrnd Date/Time

tblKeysRequests 1:M tblKeysEmployees
RequestID PK (Autonumber)
KeyID FK, #, l.i. to tblKeysEmployees
QtyRqstd
DateRqstd Date/Time
DateIssued Date/Time
DateIssued (Hmmm...I just noticed that this is the same as tblKeysEmployees)
Funny how you can gloss right over things.
Comments

tblLocks (I thought this was a junction table but now I don't know)
KeyID PK/FK
LocationID PK/FK

tblLocations 1:M tblLocks
LocationID PK (Autonumber)
LocationTypeID FK to tblLocationTypes
LocationName
Remarks

tblLocationTypes 1:M tblLocations
LocationTypeID PK (Autonumber)
LocationType

tblCampuses 1:M tblLocations
CampusID PK (Autonumber)
CampusName

tblWings 1:M tblLocations
WingsID PK (Autonumber)
WingName

So I think tblKeysEmployees defines the relationship between keys and
employees.

Regarding other parts of your previous post:

The complexity here is that one person may be assigned many keys, but a key can be assigned to only one person.

No, this is not quite true. One key can be assigned to one or many people.

One solution here may be to have a LockPerson junction table (one person many locks and vice versa).

....*another* junction table?! Please...is there any way around this?


This would be the source for a subform on the Locks form. A list box could contain a listing of unassigned keys for that lock. The list box row source would have to be built as you go, since the available keys are always changing. When somebody needs to be assigned a key you would go to the Lock form, see the listing of available keys, and created a new LockPerson record that stores the KeyID, EmployeeID, and maybe AssignedDate and other details.

It would be nice to have a list of unassigned keys but...it's a little
overwhelming right now. This just keeps growing and growing. I'm already onto
page 2 for printing the relationship diagram. Let me live with this for
awhile. I know yesterday I posted, "Oh well, c'est la vie" as far as junction
tables but today I can't deal with another junction table.

BTW:

tblKeys
KeyID (PK)
LockID (FK to tblLocks)
KeyCode (S2-A, etc., or whatever)
AssignedTo (FK to tblEmployees)
AssignedDate
Retired (Yes/No)

I like the field name KeyCode. I'm not so sure about the Retired (Yes/No)
field although that does have to be taken into account. I will probably end
up doing it that way. Let me think about it some more.

Let me know if this structure resolves *any* of the issues we have.
--
Aria W.


"BruceM" wrote:

Is the vault key just like any other key for a particular lock, except that
it is in the vault? If so, is the vault copy essentially a clean copy to be
used as the master for additional copies? If so, you can identify the valut
key either by an extra field (maybe a Yes/No Vault field) in tblKeys, or you
can "assign" the key to the vault just as you would assign it to a person.
To do this you could add (Vault) to the top of the drop-down list of
Employees to whom keys are issued, similar to the way some drop-down lists
show (All) at the top. I won't go too far down that road until I hear back
from you.

Regarding the Locks table, I don't think it would be a junction table. A
lock is an entity with certain characteristics such as brand, location, date
installed, and so forth. One Lock can have many keys. Iff Master Keys are
included in the thinking, one Key can be for many Locks, but in this case
the junction table would be tblKeyLock or something like that.

Regarding tblKey, I expect there should be a Lost field or something like
that. There is no need to keep an active listing of keys nobody can find.
Regarding the question of natural key or surrogate key (any "artificial
identifier", including autonumber), it really doesn't matter as long as the
"natural" number such as SA-2 is used once for one physical (metal) key, and
never used again. If you are not sure this is the case, autonumber would be
a simpler choice as the PK. The same idea comes into play with the Lock
identifier, I expect. If they change the lock in such a way that the old
keys can be used you will need to update the FK of those keys so that they
are associated with the new lock.

From an earlier post you wrote:

Suggestions still on the table:
1. Create tblLocations to replace tblRooms
Sounds like a good idea
..
2. Create tblLocks to define the relationsip between keys and locks. There
should be a 2 field PK involving Key ID and LocationID.
Already discussed. Let me know if something is unclear, or if I am missing
something

3. Create Master Key table to account for the special attributes of Master
Keys.
One possibility is to see the situation as One Lock Many Keys and One Key
Many Locks, in which tblKeyLock is needed to resolve the relationship for
all locks and all keys. However, I think a separate table for MasterKeys
and a junction table tblKeyLock would be simpler to manage. If you are
looking at a Lock record you would have a subform listing the ordinary keys
and the person to whom they are assigned (some may not be assigned at all, I
expect). One Lock Many Keys, so there is a 1:M between tblLock and
tblKey, and the subform is based on tblKey. Another subform based on
tblKeyLock could list the master key holders.
One lock could have keys assigned to many people, and each person could be
assigned keys. Another consideration is that a Lock record should have a
listing of available keys. If it was me I think I would have an AssignedTo
field in tblKeys:

tblKeys
KeyID (PK)
LockID (FK to tblLocks)
KeyCode (S2-A, etc., or whatever)
AssignedTo (FK to tblEmployees)
AssignedDate
Retired (Yes/No)

If I wanted to list people and the keys they hold I would use a query.

This is not necessarily the best design in that AssignedTo and AssignedDate
are not really attributes of keys. The complexity here is that one person
may be assigned many keys, but a key can be assigned to only one person.
Similarly, one lock may have many keys, but other than master keys a key may
open only one lock. On the other hand, one person may open many locks, and
a lock may be opened by many people. By the way, it just occurred to me
that if there may be several locks keyed to accept the same key you may need
to add a LockLocation table related to tblLocks to take care of this detail.
One solution here may be to have a LockPerson junction table (one person
many locks and vice versa). This would be the source for a subform on the
Locks form. A list box could contain a listing of unassigned keys for that
lock. The list box row source would have to be built as you go, since the
available keys are always changing. When somebody needs to be assigned a
key you would go to the Lock form, see the listing of available keys, and
created a new LockPerson record that stores the KeyID, EmployeeID, and maybe
AssignedDate and other details.
It may be worth your while to start a new thread on this specific topic. All
you would need to say is that you have:
A Locks table containing the LockId, LockLocation, etc.
A Keys table containing KeyID (PK), LockID (FK), KeyCode, etc.
An Employee table

Explain that you understand a Lock may have many keys, and that a person may
be assigned many keys. However, you are unsure how to store the AssignedTo
information for Keys. Should it be in the Keys table? If not, how is that
relationship modeled.

I suggest this because frankly I am unsure how best to proceed on this
point, and in a new thread you would attract the attention of very
experienced designers.

4. Create additional look-up tables: tblCampuses, tblWings and
tblLocationTypes.

Sounds good.

**********

"Aria" wrote in message
...
I think I may have a problem that I need to work through. We can discuss
this
when you have time. I just wanted to get this down before I lose track and
start dealing with other issues. I think we are going to need to re-visit
an
issue from the very first post: vault keys. Originally, we decided that
the
situation was unclear and dropped it. In looking through some of the data
that I copied to help map my direction, I just noticed something that I
probably saw before but did not grab my attention as it has now. During
the
re-key, among the many replacement keys made, one key was important enough
to
be "assigned" to the vault. There are probably others, but that happened
before my time so I am not aware of the previous history. This does change
things a bit. I'm going to have to account for not only that key, but all
of
the vault keys.

I have two trains of thought right now:

The first is that the vault key is a sub type key that will need its own
table. I don't know about this because it doesn't seem to fit the model of
a
sub type (at least not as far as I can see). It's not like the masters
which
are actually a different type of key. Their attributes are significantly
different. Not so with the vault key; there's nothing special or different
about them.

The second thought is that this is really a location type and will need to
be included with tbllocations or is it tbllocationtypes. I'm still working
on
this because I'm unsure right now. It does seem to fit the "where" model
though.

Just throwing it out there...

--
Aria W.


"Aria" wrote:

I don't have much time to reply today, but I have noted a few things
inline.

Please, don't give it a second thought. I appreciate all of the support
you
have both given me. I understand.

If you select the combo box, open the Property Sheet (with the tabs for
Format, Data, etc.), select an event, click the three dots, click Code
Builder, and click OK the name of the control will be filled in for you
in
the code window. If you type it yourself you need the underscore. I
think
that is so there are no spaces in the procedure name.

I'll check on that.

There's no definitive answer for that, but anything that involves
junction
tables is a lot to get your mind around if you are just starting.
Before
long, if it hasn't already happened, the need for junction tables, and
how
to use them, will be clear in your mind. In your case there were a
number
of junction tables, and a situation that involved keys, locks, people
to
whom the keys were issued, locations of the locks, campuses, and a
number of
other entities, with a variety of relationships between the entities.

Yeah, no kidding. I started thinking about that because I was trying to
avoid adding yet another junction table. I recall a previous discussion
where
we decided that the room phone could go into tblLocations. That would
leave
district cell phone orphaned and I could not figure out where to put it.
It
doesn't belong in tblLocations and doesn't belong in tblEmployees so I
figured why am I drawing the line at this junction table when there are 5
others just like it. Oh well...c'est la vie! I keep looking at the
relationship diagram and I 'm concerned how I will manage all of this. In
particular, what kind of form to design and whether I should have
another
subform for tbKleysRequests on frmEmployees. I'm trying not to borrow
trouble; one thing at a time.

What became of tblLocks? If one lock may have several keys, locks are
the
top level.

"A lock can have several keys". There have been a number of turning
points
in this journey. You both have dropped statements that on the surface
seemed
inconsequential ,but in reality had a major impact. That is one thing I
am
*never* going to forget. You made 3 on the mark statements in that post.
tblLocks is still here. It*is* a junction table, correct? It sure looks
like
one.
Suggestions still on the table:
1. Create tblLocations to replace tblRooms.
2. Create tblLocks to define the relationsip between keys and locks.
There
should be a 2 field PK involving Key ID and LocationID.
3. Create Master Key table to account for the special attributes of
Master
Keys.
4. Create additional look-up tables: tblCampuses, tblWings and
tblLocationTypes.

Questions/Comments:
1.Decision--Unbeknowst to you and Beetle, I was going to use a
natural key
for KeyID in tblKeys. Your statement about a possible re-key and our
history
of such finally made me realize that this was a *lousy* idea from the
beginning. I'm switching to autonumber.

There's nothing wrong with a natural key, depending on what it is.
With a
surrogate key such as autonumber the main thing is that the record
needs to
be unique for reasons apart from the autonumber field. If two records
are
identical except for an artificial identifier then they are not really
unique. The autonumber is a convenience, but cannot by itself enforce
what
is known as a unique constraint.

Won't this cause a problem? With the re-key, they not only changed the
lock,
they changed the lock identifier. So if the key was previously, let's
say,
SA-2 , it may have been changed to XJ-3A after the re-key. If I used this
as
my primary key, I would have thought this would be a nightmarish
situation.
No? If it happened once, there's always the possibility that it *could*
happen again. Keys are lost pretty much on a weekly basis. What do you
thinK?
Do I need an inactive button for keys? I don't know exactly *how* this
would
work.

Let me know what you think about that and the master keys. Don't concern
yourself if you don't have time. I have problems in the db that I need to
straighten out. Thanks so much for your time Bruce.

--
Aria W.


"BruceM" wrote:

I don't have much time to reply today, but I have noted a few things
inline.

"Aria" wrote in message
...
I found the compile button. It was under commands so I added it to the
toolbar. Thanks.

I will take a look at your questions, but you will need to sort of
start
over with your descriptions, as I have not been following very
closely of
late. When you do so, list only the essential fields.

Not quite ready to list the table structures for this part
yet...still
stinging from the last time when they were all wrong. I just
basically
want
to think on post. Ask a few questions and have you weigh in on where
I'm
going wrong. Are you Ok with that? I completely understand what you
mean
as
far as having lost track. I have all my notes and posts and I still
have
to
read up on what's going on and what transpired.

Questions unrelated to 2nd half of db:
1. When I input the programmng code for the AfterUpdate event, I
input
cboStaff_Lookup. The line highlighted in yellow said, "Private Sub
cboStaff_Lookup_ AfterUpdate () Was I supposed to input that final
underscore
after Lookup?